Table of Contents
Advertisement
126
3-2. Opening, closing and locking the doors
3
Press
control switches, select "PBD"
and then press
4
Press
control switches, and then
select "System Settings".
5
ON and OFF will be switched
when
When OFF is selected and the opera-
tions of the power back door is made to
stop from the
display, unless it is set to ON, the oper-
ation of the power back door will not
return. (No return in the power switch
operation)
Enabling/disabling the
Hands Free Power Back
Door (vehicles with a power
back door)
The Hands Free Power Back Door
(kick sensor) can be enabled/disa-
bled on the multi-information dis-
play. (P.427)
1
Press
trol switches and select
2
Press
trol switches, select the "Vehicle
Settings" and then press and
hold
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
or
of the meter
.
or
of the meter
is pressed.
of multi-information
or
of meter con-
.
or
of meter con-
.
3
Press
or
of the meter
control switches, select "PBD"
and then press
4
Press
or
of the meter
control switches, select "Kick
Sensor" and then press
5
ON and OFF will be switched
when
is pressed.
When OFF is selected and the opera-
tions of the Hands Free Power Back
Door is made to stop from the
multi-information display, unless it is set
to ON, the operation of the Hands Free
Power Back Door will not return. (No
return in the power switch operation)
Adjusting the open position
of the back door (vehicles
with a power back door)
The open position of the power
back door can be adjusted.
1
Stop the power back door at the
desired position. (P.118)
2
Press and hold the power back
door switch on the back door for
approximately 2 seconds.
• When setting is complete, a
buzzer will sound 4 times.
• The next time the power back
door is opened, it will stop at that
.
.
of
Advertisement
Table of Contents
