Table of Contents
Advertisement
■
Back door closer
In the event that the back door is left
slightly open, the back door closer will
automatically close it to the fully closed
position.
●
The back door closer can function
when the power switch is in any
mode.
●
The back door can be opened using
the back door opener switch even if
the back door closer is operating.
■
Power back door operating condi-
tions
If the following conditions are met, the
power back door can be opened and
closed automatically.
●
When the power back door system is
enabled. (P.427)
●
When the power switch is in ON, one
of the following conditions must be
met in addition to the above condi-
tions:
• The parking brake is engaged.
• The brake pedal is depressed.
• The shift lever is in P.
■
Operation of the power back door
●
When the power back door begins to
operate, a buzzer will sound.
●
A buzzer sounds
back door is operating.
●
When the power back door is disa-
bled, the power back door will not
operate but can be opened and
closed manually.
●
When the power back door is open-
ing/closing, if the power back door
becomes obstructed, operation will
stop.
*
: This setting must be customized at
your Toyota dealer.
■
Jam protection function
Sensors are installed on the right and
left sides of the power back door. When
the door is automatically closing and the
sensors are pushed due to an object
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
3-2. Opening, closing and locking the doors
*
to indicate that the
being clamped, etc., the jam protection
function operates.
From that position the door automati-
cally moves a little in the opposite direc-
tion and then the function stops.
■
Back door reserve lock function
This function reserves the locking of the
power back door when the power back
door is open. If the following operations
are performed, all of the doors except
the power back door will lock and then
the power back door will lock when it is
completely closed.
1
Close all of the doors, except the
back door.
2
Perform an automatic closing opera-
tion of the power back door and lock
the doors using the wireless remote
control (P.111) or smart entry &
start system (P.111) while the
power back door is closing.
A buzzer sounds and the emergency
flashers flash to indicate that all the
doors have been closed and locked.
●
If the electronic key is placed inside
the vehicle after starting a close oper-
ation via the door reserve lock func-
tion, the electronic key may become
locked inside the vehicle.
●
If the back door does not fully close
due to the operation of the jam protec-
tion function, etc., while the back door
is automatically closing after a door
reserve lock operation is performed,
the door reserve lock function is
canceled and all the doors will unlock.
●
Before leaving the vehicle, make sure
that all the doors are closed and
locked.
121
3
Advertisement
Table of Contents
