Table of Contents
Advertisement
Lubrication system
■
Oil capacity (Drain and refill
[Reference
With filter
Without fil-
ter
*
: The engine oil capacity is a reference
quantity to be used when changing
the engine oil. Warm up the engine
and turn off the hybrid system, wait
more than 5 minutes, and check the
oil level on the dipstick.
■
Engine oil selection
"Toyota Genuine Motor Oil" is used
in your Toyota vehicle. Use Toyota
approved "Toyota Genuine Motor
Oil" or equivalent to satisfy the fol-
lowing grade and viscosity.
Oil grade:
0W-20, 5W-20, 5W-30 and
10W-30:
API grade SL "Energy-Conserving",
SM "Energy-Conserving", SN
"Resource-Conserving" or SN
PLUS "Resource-Conserving"; or
ILSAC multigrade engine oil
Recommended viscosity (SAE):
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
*
])
4.2 L (4.4 qt., 3.7 Imp. qt.)
3.9 L (4.1 qt., 3.4 Imp. qt.)
9-1. Specifications
Temperature range anticipated
before next oil change
Preferred
SAE 0W-20 is filled into your Toyota
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather.
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
0W-20, 5W-20 or 5W-30 engine oil
is recommended.
Oil viscosity (0W-20 is explained
here as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which
allows cold startability. Oils with a
lower value before the W allow
for easier starting of the engine
in cold weather.
• The 20 in 0W-20 indicates the
viscosity characteristic of the oil
when the oil is at high tempera-
ture. An oil with a higher viscos-
ity (one with a higher value) may
be better suited if the vehicle is
operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should
use.
421
9
Advertisement
Table of Contents
