Table of Contents
Advertisement
214
4-5. Using the driving support systems
1
Increases the speed
2
Decreases the speed
Fine adjustment: Press the switch.
Large adjustment: Press and hold the
switch to change the speed, and
release when the desired speed is
reached.
In the vehicle-to-vehicle distance
control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: Increases or
decreases in 5 km/h (3.1 mph)
mph (8 km/h)
as the switch is held
In the constant speed control mode
(P.215), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
or 1 mph (1.6 km/h)
switch is pressed
Large adjustment: The speed will con-
tinue to change while the switch is held.
*1
: When the set speed is shown in
"km/h"
*2
: When the set speed is shown in
"MPH"
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
*2
each time the
*1
or 5
*2
increments for as long
*2
each time the
Changing the vehi-
cle-to-vehicle distance (vehi-
cle-to-vehicle distance
control mode)
Pressing the switch changes the
vehicle-to-vehicle distance as fol-
lows:
1
Long
2
Medium
3
Short
*1
If a vehicle is running ahead of you, the
preceding vehicle mark
displayed.
Vehicle-to-vehicle distance
settings (vehicle-to-vehicle
distance control mode)
Select a distance from the table
below. Note that the distances
*1
shown correspond to a vehicle
speed of 80 km/h (50 mph). Vehi-
cle-to-vehicle distance
increases/decreases in accord-
ance with vehicle speed.
will also be
Advertisement
Table of Contents
