Rcta (Rear Cross Traffic Alert) Function - Toyota COROLLA CROSS HYBRID 2020 Owner's Manual

234
4-5. Using the driving support systems
RCTA (Rear Cross Traffic
Alert) function
*
: If equipped
The RCTA function uses the
BSM rear side radar sensors
installed behind the rear
bumper. This function is
intended to assist the driver in
checking areas that are not
easily visible when backing up.
System components
Meter control switches
Turning the RCTA function on/off.
When the RCTA function is disabled,
the RCTA OFF indicator illuminates.
Outside rear view mirror indica-
tors
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, both outside rear view mirror
indicators will flash.
Audio system screen (if
equipped)
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
If a vehicle approaching from the right
or left at the rear of the vehicle is
*
detected, the RCTA icon (P.236) for
the detected side will be displayed on
the audio system screen. This illustra-
tion shows an example of a vehicle
approaching from both sides of the
vehicle.
RCTA buzzer
If a vehicle approaching from the right
or left at the rear of the vehicle is
detected, a buzzer will sound. The
buzzer also sounds for approximately 1
second immediately after the RCTA
function is turned on.
Turning the RCTA function
on/off
Use the meter control switches to
enable/disable the RCTA function.
(P.93)
1
Press
2
Press
"RCTA" and then press
When the RCTA function is disabled,
the RCTA OFF indicator (P.80) illumi-
nates. (Each time the power switch is
turned off then changed to ON, the
RCTA function will be enabled automat-
ically.)
■
Cautions regarding the use of
the function
The driver is solely responsible for
safe driving. Always drive safely, tak-
ing care to observe your
surroundings.
or to select
or to select
WARNING
.
.