Table of Contents

Advertisement

Quick Links

Pictorial index
For safety
and security
Vehicle status
information and
indicators
Before driving
Driving
Interior features
Maintenance
and care
When trouble
arises
Vehicle
specifications
For owners
Index
COROLLA CROSS HYBRID_MTMUS_U
Search by illustration
Make sure to read through them
(Main topics: Child seat, theft deterrent system)
Reading driving-related information
(Main topics: Meters, multi-information display)
Opening and closing the doors and windows,
adjustment before driving
(Main topics: Keys, doors, seats)
Operations and advice which are necessary for
driving
(Main topics: Starting hybrid system, refueling)
Usage of the interior features
(Main topics: Air conditioner, storage features)
Caring for your vehicle and maintenance
procedures
(Main topics: Interior and exterior, light bulbs)
What to do in case of malfunction and emergency
(Main topics: Battery discharge, flat tire)
Vehicle specifications, customizable features
(Main topics: Fuel, oil, tire inflation pressure)
Reporting safety defects for U.S. owners, and seat
belt, SRS airbag and headlight aim instructions for
Canadian owners
Search by symptom
Search alphabetically
1
2
3
4
5
6
7
8
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the COROLLA CROSS HYBRID and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toyota COROLLA CROSS HYBRID

  • Page 1 Pictorial index Search by illustration For safety Make sure to read through them and security (Main topics: Child seat, theft deterrent system) Vehicle status Reading driving-related information information and (Main topics: Meters, multi-information display) indicators Opening and closing the doors and windows, Before driving adjustment before driving (Main topics: Keys, doors, seats)
  • Page 2: Table Of Contents

    TABLE OF CONTENTS For your information ......Energy monitor/consumption screen ......Reading this manual ......12 How to search........13 Before driving Pictorial index ........14 For safety and security 3-1. Key information Keys ........1-1. For safe use 3-2. Opening, closing and locking Before driving ......24 the doors...
  • Page 3 5-2. Using the interior lights 4-5. Using the driving support sys- Interior lights list ....tems 5-3. Using the storage features Toyota Safety Sense 3.0 soft- List of storage features ..ware update ..... Luggage compartment features Toyota Safety Sense 3.0 ..
  • Page 4: Interior Lights List

    TABLE OF CONTENTS Positioning a floor jack ..If the electronic key does not operate properly....Engine compartment ..If the 12-volt battery is dis- 12-volt battery ....charged ......Tires ........If your vehicle overheats ..Replacing the tire ....If the vehicle becomes stuck Tire inflation pressure..
  • Page 5: For Your Information

    Toyota reserves they may have on, your Toyota the right to make changes to this vehicle. manual at any time without This vehicle should not be modi- notice.
  • Page 6: Other Interior Features

    Vehicle data recording tion. Toyota does not make any guarantees for problems caused This vehicle is equipped with by installing non-genuine Toyota sophisticated computers that products.
  • Page 7 • When driving on roads with cer- ment agency tain traffic situations, such as • When it is to be used by Toyota in congestion, poor road surfaces, a lawsuit poor weather, etc.
  • Page 8 If you wish to stop the collection of driving software, etc. for the pur- Toyota Safety Sense 3.0 data by the pose of research and develop- Toyota servers for the purpose of research and development and pro-...
  • Page 9: Cleaning And Protecting The Vehicle Interior

    performed service on the vehi- main purpose of an EDR is to record, in certain crash or near cle. This provision does not apply to a new motor vehicle crash-like situations, such as an purchased solely for commercial air bag deployment or hitting a road obstacle, data that will or industrial use.
  • Page 10 • For use by Toyota in a lawsuit “QR Code” However, if necessary, Toyota may: The word “QR Code” is regis- • Use the data for research on...
  • Page 11 WARNING General precautions while ■ driving Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired your ability to oper- ate your vehicle. Alcohol and cer- tain drugs delay reaction time, impair judgment and reduce coor- dination, which could lead to an accident that could result in death...
  • Page 12: Reading This Manual

    Reading this manual Symbols Meanings Indicates the action Explains symbols used in (pushing, turning, etc.) used to operate this manual. switches and other devices. Symbols in this manual Indicates the out- come of an operation Symbols Meanings (e.g. a lid opens). WARNING: Explains something that, if not obeyed,...
  • Page 13: How To Search

    ■ How to search Searching by title  Table of contents: P.2 ■ Searching by name  Alphabetical index: P.499 ■ Searching by installation position  Pictorial index: P.14 ■ Searching by symptom or sound  What to do if... (Troubleshoot- ing): P.496...
  • Page 14: Pictorial Index

    Pictorial index Pictorial index ■Exterior Side doors ................P.117 Locking/unlocking ..............P.117 Opening/closing the side windows ........P.145 Locking/unlocking by using the mechanical key ....P.442 Warning messages .............. P.120 Back door ................P.121 Opening from inside the cabin ..........P.125 Opening from outside............
  • Page 15 Pictorial index Fuel filler door ..............P.204 Refueling method ..............P.205 Fuel type/fuel tank capacity ..........P.455 Tires..................P.367 Tire size/inflation pressure ........... P.460 Winter tires/tire chains ............P.300 Checking/rotation/tire pressure warning system ....P.367 Coping with flat tires............. P.428 Hood ..................
  • Page 16: Instrument Panel

    Pictorial index ■Instrument panel Power switch ..............P.176 Starting the hybrid system/changing the modes ....P.176 Emergency stop of the hybrid system ........P.405 When the hybrid system will not start ........P.439 Warning messages .............. P.422 Shift lever................P.183 Changing the shift position...........
  • Page 17 Pictorial index Turn signal lever..............P.187 Headlight switch ..............P.194 Headlights/parking lights/tail lights/side marker lights/license plate lights/daytime running lights..........P.194 Fog lights P.200 Windshield wiper and washer switch....... P.200, 202 Usage................P.200, 202 Adding washer fluid.............. P.364 Emergency flasher switch..........P.404 Tilt and telescopic steering lock release lever....
  • Page 18 Pictorial index ■Switches Instrument panel light control dial ....... P.88, 92 Automatic High Beam switch .......... P.197 VSC OFF switch ..............P.294 Windshield wiper de-icer switch ........P.312 Power back door switch ........... P.125 Fuel filler door opener switch ........... P.204 Outside rear view mirror switch ........
  • Page 19 Pictorial index Paddle shift switches ............P.185 Cruise control switches Dynamic radar cruise control ..........P.244 Cruise control ............... P.255 Audio remote control switches LTA (Lane Tracing Assist) switch ........P.225 Phone switch Talk switch : If equipped : Refer to “MULTIMEDIA OWNER’S MANUAL”. Heated steering wheel switch ..........
  • Page 20 Pictorial index ■Interior SRS airbags ................P.31 Floor mats................P.24 Front seats................P.136 Head restraints ..............P.139 Seat belts ................P.27 Console box ............... P.320 Inside lock buttons ............P.120 Cup holders ................ P.319 Rear seats ................P.137...
  • Page 21 Pictorial index ■Ceiling Inside rear view mirror ............P.142 Sun visors................P.332 Vanity mirrors ..............P.332 Vanity lights ............... P.332 Interior lights/personal lights ........... P.316 Moon roof switches ............P.148 “SOS” button ............... P.66 Assist grips ................ P.333 : If equipped...
  • Page 22 Pictorial index...
  • Page 23: For Safety And Security

    For safety and security 1-1. For safe use Before driving....24 For safe driving ....25 Seat belts .......27 SRS airbags ....31 Front passenger occupant classification system ..39 Exhaust gas precautions ........43 1-2. Child safety Riding with children ..44 Child restraint systems...45 1-3.
  • Page 24: Before Driving

    Do not use floor mats designed ● (clips) into the floor mat eye- for other models or different model year vehicles, even if lets. they are Toyota Genuine floor mats. Only use floor mats designed ● for the driver’s seat. Always install the floor mat ●...
  • Page 25: For Safe Driving

    1-1. For safe use For safe driving WARNING Before driving ■ For safe driving, adjust the Check that the floor mat is ● securely fixed in the correct seat and mirror to an appro- place with all the provided priate position before driv- retaining hooks (clips).
  • Page 26: Adjusting The Mirrors

    1-1. For safe use Correct use of the seat WARNING belts For safe driving ■ Observe the following precau- Make sure that all occupants are tions. wearing their seat belts before Failure to do so may result in death or serious injury. driving the vehicle.
  • Page 27: Seat Belts

    If the seat belt is not worn prop- Toyota recommends that chil- ● erly, not only the pregnant dren be seated in the rear seat woman, but also the fetus could...
  • Page 28 Have any necessary repairs carried Seat belt extender ■ out by your Toyota dealer. Inap- If your seat belts cannot be fastened propriate handling may lead to securely because they are not long incorrect operation.
  • Page 29 1-1. For safe use WARNING Emergency locking retractor ■ (ELR) Do not use the seat belt ● extender when installing a child The retractor will lock the belt during restraint system because the a sudden stop or on impact. It may belt will not securely hold the also lock if you lean forward too child restraint system, increas-...
  • Page 30 SRS warning light will illumi- seats) nate. In this situation, the seat belt cannot be used and must be replaced by your Toyota When the vehicle is subjected to dealer. a severe frontal or side impact or rollover, the pretensioners...
  • Page 31: Srs Airbags

    1-1. For safe use SRS airbags The SRS airbags deploy when the vehicle is subjected to cer- tain types of severe impact that may cause significant injury to the occupants. The airbags work together with the seat belts to help reduce the risk of death or serious injury. SRS airbag system SRS driver airbag/front passenger airbag Help reduce impact to the head and chest of the driver and front passenger...
  • Page 32 1-1. For safe use based on US motor vehicle safety standards (FMVSS208). The air- bag sensor assembly (ECU) controls airbag deployment based on information obtained from the sensors, etc., shown in the system components diagram above. This information includes crash sever- ity and occupant information.
  • Page 33 1-1. For safe use passenger seat. However, the • SRS curtain shield airbags SRS airbags for the front passen- ger’s seat may deploy, even if the seat is unoccupied, if luggage is put on the seat. ● In the event of an especially severe frontal collision, the left and right SRS curtain shield air- bags may also deploy.
  • Page 34 When the surface of a seat with ● an SRS side airbag is scratched, When to contact your Toyota ■ cracked, or otherwise damaged. dealer When the part of a front pillar, rear ●...
  • Page 35 1-1. For safe use • If your steering wheel is adjust- WARNING able, tilt it downward. This The SRS driver airbag deploys ● points the airbag toward your with considerable force, and chest instead of your head and can cause death or serious neck.
  • Page 36 Toyota strongly recom- mends that all infants and chil- dren be placed in the rear seats of the vehicle and properly restrained.
  • Page 37 If a part where an SRS airbag is ● stored is damaged or cracked, have it replaced by your Toyota dealer. Do not hang coat hangers or ● other hard objects on the coat Do not place anything, such as ●...
  • Page 38 1-1. For safe use WARNING • Dashboard • Seats • Seat upholstery • Front pillars • Side pillars • Rear pillars • Roof side rails • Front door panels • Front door trim • Front door speakers Modifications to the front door ●...
  • Page 39: Front Passenger Occupant Classification System

    1-1. For safe use Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system.This system detects the conditions of the front passenger seat and activates or deactivates the fol- lowing SRS airbags.  SRS front passenger airbag SRS front passenger airbag SRS warning light Front passenger seat belt reminder light...
  • Page 40 1-1. For safe use Front passenger occupant classification system condi- tions and operation ■ Adult “AIR BAG ON” and “AIR BAG “AIR BAG ON” OFF” indicator lights Indicators/warning SRS warning light lights Front passenger’s seat belt or flashing reminder light Devices Front passenger airbag Activated...
  • Page 41 1-1. For safe use System malfunction ■ “AIR BAG ON” and “AIR BAG “AIR BAG OFF” OFF” indicator lights Indicators/warning SRS warning light lights Front passenger’s seat belt reminder light Devices Front passenger airbag Deactivated : The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may not recognize them as an adult depending on their physique and posture.
  • Page 42 In this case, touches a rear seat. This may contact your Toyota dealer cause the “AIR BAG OFF” indi- immediately. cator light to be illuminated, which indicates that the SRS Child restraint systems installed ●...
  • Page 43: Exhaust Gas Precautions

    Failure to do so may cause repaired by your Toyota dealer. exhaust gases enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.
  • Page 44: 1-2. Child Safety

    1-2. Child safety Riding with children 1-2.Child safety WARNING When children are in the vehi- ■ Observe the following pre- Never leave children unattended cautions when children are in the vehicle, and never allow in the vehicle. children to have or use the key. Use a child restraint system Children may be able to start the appropriate for the child,...
  • Page 45: Child Restraint Systems

    1-2. Child safety anchorage (for Puerto Rico): Child restraint sys- P.60 tems • Using an anchor bracket (for top tether strap) (except for Before installing a child Puerto Rico): P.63 restraint system in the vehi- • Using a top tether anchorage cle, there are precautions (for Puerto Rico): P.64 that need to be observed,...
  • Page 46 Toyota strongly urges the use of ● a proper child restraint system Except for Puerto Rico: Make ● that conforms to the weight and...
  • Page 47 1-2. Child safety Child restraint system ■ Types of child restraint system installation methods Confirm with the operation manual enclosed with the child restraint system about the installation of the child restraint system. Installation method Page Seat belt attachment P.54 Except for Puerto Rico: Child restraint LATCH anchors attachment...
  • Page 48 1-2. Child safety install the child restraint system: Never use a rear-facing child ● restraint system on the front  Move the front seat fully rear- passenger seat. The force of ward. the rapid inflation of the front passenger airbag can cause ...
  • Page 49 1-2. Child safety If the driver’s seat interferes WARNING ● with the child restraint system Do not allow the child to lean ● and prevents it from being his/her head or any part of attached correctly, attach the his/her body against the door or child restraint system to the the area of the seat, front or rear right-hand rear seat.
  • Page 50 1-2. Child safety Check the selected child The weight range of the child restraint system together with who is applicable for an the following [Before confirming UN(ECE) R44 approval mark the compatibility of each seating is indicated. position with child restraint sys- UN(ECE) R129 approval tems].
  • Page 51 1-2. Child safety : The child restraint systems men- Suitable for “universal” cate- tioned in the table may not be gory child restraint system available outside of the EU area. fixed with the seat belt. Suitable for child restraint : The displayed mark may differ systems given on recom- depending on the product.
  • Page 52 1-2. Child safety ■ Detail information for child restraint systems installation Seating position Vehicle with front pas- senger occupant Seat position number detection system Passenger airbag indi- cator light Seating position suitable for Forward-fac- universal belted (Yes/No) ing only i-Size seating position (Yes/No) Seating position suitable for lateral fixture (L1/L2/No)
  • Page 53 1-2. Child safety Fixture Description Reduced-height forward-facing child restraint systems Full-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Reduced-size, rearward-facing child restraint systems Rearward-facing infant seat Left lateral-facing (carrycot) infant seat Right lateral-facing (carrycot) infant seat Junior seat Junior seat ■...
  • Page 54 1-2. Child safety ■ with support base, if the child Installing child restraint seat interferes with the seat- system using a seat belt back when latching it into the (child restraint lock func- support base, adjust the seat- tion belt) back rearward until there is no Install the child restraint system interference.
  • Page 55 1-2. Child safety buckle. Make sure that the check that it cannot be extended. belt is not twisted. After installing the child restraint system, rock it back Fully extend the shoulder belt and forth to ensure that it is and allow it to retract to put it installed securely.
  • Page 56 1-2. Child safety Place the child restraint sys- seat, allow the shoulder belt tem on the seat facing the to retract until the child front of the vehicle. restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
  • Page 57 1-2. Child safety restraint. low as possible. (P.27) Otherwise, put the head restraint in the upper most position. (P.139) Place the child restraint sys- tem on the seat facing the front of the vehicle. Booster type  Removing a child restraint ■...
  • Page 58 1-2. Child safety When installing a booster WARNING ■ seat Do not allow children to play ● To prevent the belt from going into with the seat belt. If the seat belt ALR lock mode, do not fully becomes twisted around a extend the shoulder belt.
  • Page 59 1-2. Child safety ■ When installing in the rear With rigid lower attachments  outboard seats Remove the anchor covers, and install the child restraint Install the child restraint system system to the seat. in accordance to the operation manual enclosed with the child The bars are installed behind the anchor covers.
  • Page 60 1-2. Child safety However, the inboard LATCH Never attach two child restraint ● anchors of the outboard seats, system attachments to the same anchor. In a collision, one which are 16.1 in. (410 mm) anchor may not be strong apart, can be used if the child enough to hold two child restraint system manufacturer’s restraint system attachments...
  • Page 61 1-2. Child safety anchorage covers. ■ When installing in the rear outboard seats Install the child restraint system in accordance to the operation manual enclosed with the child With rigid lower attachments  restraint system. Remove the anchorage cov- If the child restraint system on ers, and install the child hand is not within the “universal”...
  • Page 62 1-2. Child safety After installing the child WARNING restraint system, rock it back When installing a child ■ and forth to ensure that it is restraint system installed securely. (P.58) Observe the following precau- tions. When installing in the rear ■...
  • Page 63 1-2. Child safety Make sure the top tether strap is Using an anchor bracket securely latched. (P.57) (for top tether strap) When installing the child restraint system with the head restraint (except for Puerto Rico) being raised, be sure to have the top tether strap pass underneath ■...
  • Page 64 1-2. Child safety fications can be used. This vehicle is designed to conform to SAE J1819. WARNING When installing a child ■ restraint system Observe the following precau- tions. Failure to do so may result in death or serious injury. Top tether anchorages Top strap Firmly attach the top tether...
  • Page 65 1-2. Child safety restraint. Firmly attach the top strap and ● make sure that the belt is not twisted. Do not attach the top strap to ● anything other than the top tether anchorages. After securing a child restraint ● system, never adjust the seat.
  • Page 66: 1-3. Emergency Assistance

    (P.68) the United States, Toy-  Emergency Assistance Button otapr.com in Puerto Rico (“SOS”) and Toyota.ca in Canada. All Connects drivers to response-cen- use of the Safety Connect ter support. (P.68) service is subject to such  Enhanced Roadside Assis-...
  • Page 67 A variety of subscription terms Emergency Assistance, Stolen are available for purchase. Con- Vehicle and Enhanced Road tact your Toyota dealer, call the Assistance are not available in the U.S. Virgin Islands. following appropriate Customer For vehicles first sold in the U.S.
  • Page 68 ■ parties to locate your vehicle. Automatic Collision Notifi- Further information is available cation at Toyota.com in the United In case of either airbag deploy- States, Toyotapr.com in Puerto ment or severe rear-end colli- Rico and Toyota.ca in Canada. sion, the system is designed to ■...
  • Page 69 Safety Connect Terms and Those standards were based on Conditions, which are available comprehensive and periodic at Toyota.com in the United evaluations of the relevant sci- States, Toyotapr.com in Puerto entific literature. Over 120 scien- Rico and Toyota.ca in Canada.
  • Page 70: 1-4. Hybrid System

    1-4. Hybrid system Hybrid system features 1-4.Hybrid system Your vehicle is a hybrid vehicle. It has characteristics different from conventional vehicles. Be sure you are closely familiar with the characteristics of your vehicle, and operate it with care. The hybrid system combines the use of a gasoline engine and an electric motor (traction motor) according to driving condi- tions, improving fuel efficiency and reducing exhaust emis- sions.
  • Page 71 D or B. hybrid system, contact your Toyota ● The brake pedal is depressed dealer. while driving with the shift lever in...
  • Page 72: Acoustic Vehicle Alerting System

    The gasoline engine may not stop and disposal even if the vehicle is being driven by the hybrid battery (traction battery). Contact your Toyota dealer regard- If this continues for a few days, con- ing maintenance, repair, recycling tact your Toyota dealer.
  • Page 73: Hybrid System Precautions

    1-4. Hybrid system Hybrid system precautions Take care when handling the hybrid system, as it is a high voltage system (about 600 V at maximum) as well as contains parts that become extremely hot when the hybrid system is operating. Obey the warning labels attached to the vehicle. System components The illustration is an example for explanation and may differ from the actual item.
  • Page 74 1-4. Hybrid system may vary when the vehicle is on a The hybrid system will become ● slope. Add extra fuel when the vehi- hot after starting as the system cle is inclined.) uses high voltage. Be careful of both the high voltage and the Electromagnetic waves ■...
  • Page 75 This may cause a fire. posed vehicle are collected  P.407) through Toyota dealer. Do not dispose of the battery yourself. Carefully inspect the ground ● under the vehicle. If you find Unless the battery is properly col-...
  • Page 76 Toyota dealer or a qualified service shop. If the hybrid bat- tery is not disposed of properly, it may cause electric shock that...
  • Page 77 If a warning light comes on, a warning message is displayed, or the 12-volt battery is discon- nected The hybrid system may not start. In this case, try to start the system again. If the “READY” indicator does not come on, contact your Toyota dealer.
  • Page 78: 1-5. Theft Deterrent System

    1-5. Theft deterrent system Immobilizer system 1-5.Theft deterrent system System maintenance ■ The vehicle has a mainte- nance-free type immobilizer system. The vehicle’s keys have built-in transponder chips Conditions that may cause the ■ system to malfunction that prevent the hybrid sys- If the grip portion of the key is in ●...
  • Page 79: Alarm

    1-5. Theft deterrent system Alarm The indicator light changes from being on to flashing when the sys- tem is set. : If equipped If all doors are closed with back The alarm uses light and door or hood open, alarm system sound to give an alert when can be set.
  • Page 80 1-5. Theft deterrent system While the alarm is activated, a ● person remaining in the vehicle unlocks the door. When recharging or replacing the ● 12-volt battery NOTICE To ensure the system oper- ■ If a door is unlocked using the ates correctly mechanical key while the alarm is Do not modify or remove the sys-...
  • Page 81: Vehicle Status Information And Indicators

    Vehicle status information and indicators 2-1. Instrument cluster Warning lights and indica- tors .......82 Gauges and meters (4.2-inch display)..86 Gauges and meters (7-inch display)......89 Multi-information display (4.2-inch display)..92 Multi-information display (7-inch display)..Energy monitor/consump- tion screen....
  • Page 82: 2-1. Instrument Cluster

    2-1. Instrument cluster Warning lights and indicators 2-1.Instrument cluster The warning lights and indicators on the instrument cluster, center panel and outside rear view mirrors inform the driver of the status of the vehicle’s various systems. Warning lights and indicators displayed on the instru- ment cluster For the purpose of explanation, the following illustrations display all warning lights and indicators illuminated.
  • Page 83: Warning Lights

    2-1. Instrument cluster Warning lights Electric power steering system warning light Warning lights inform the driver (Red/yel- (P.415) low) of malfunctions in the indicated Low fuel level warning vehicle’s systems. light (P.415) Driver’s and front passen- Brake system warning ger’s seat belt reminder light (P.412) light (P.415)
  • Page 84 (P.200) system if the lights do not come *1, 2 PCS warning light on, or turn off. Have the vehicle (P.215) inspected by your Toyota dealer. : This light illuminates on the Cruise control indicator multi-information display. (P.255) (Green/ : 4.2-inch display.
  • Page 85 (Flashes) on, or turn off. Have the vehicle *1, 2 VSC OFF indicator inspected by your Toyota dealer. (P.295) : This light comes on when the Smart key system indica- system is turned off.
  • Page 86: Gauges And Meters (4.2-Inch Display)

    2-1. Instrument cluster Gauges and meters (4.2-inch display) Meter display ■ Locations of gauges and meters The units of measure may differ depending on the intended destination of the vehicle. Tachometer Displays the engine speed in revolutions per minute Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 140°F (60°C) Clock (P.88)
  • Page 87 When “--” or “E” is displayed, the ● and check the engine after it system may be malfunctioning. has cooled completely. Take your vehicle to your Toyota (P.449) dealer. Liquid crystal display ■ Odometer and trip meter P.93...
  • Page 88 2-1. Instrument cluster ■ Display items  Odometer Displays the total distance the vehi- cle has been driven.  Trip meter A/Trip meter B Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B Brighter can be used to record and display different distances independently.
  • Page 89: Gauges And Meters (7-Inch Display)

    2-1. Instrument cluster Gauges and meters (7-inch display) Meter display ■ Locations of gauges and meters The units of measure may differ depending on the intended destination of the vehicle. Engine coolant temperature gauge Displays the engine coolant temperature Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 140°F (60°C) Hybrid System Indicator/Analog speedometer/Tachometer...
  • Page 90 By keeping the bar display within ● When “--” or “E” is displayed, the Eco area, more Eco-friendly driv- system may be malfunctioning. Take your vehicle to your Toyota ing can be achieved. dealer. Power area ■ Liquid crystal display Shows that an Eco-friendly driving P.93...
  • Page 91 2-1. Instrument cluster played. tomized in of the multi-informa- tion display. (P.98) WARNING The information display at ■ low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display Display items...
  • Page 92: Multi-Information Display (4.2-Inch Display)

    2-1. Instrument cluster Multi-information dis- Changing the instrument play (4.2-inch display) panel light brightness The brightness of the instrument Display and menu icons panel lights can be adjusted. ■ Display Brighter Darker Driving support system status display area ■ Instrument panel light bright- Displays an image when the follow- ness adjustment ing systems are operating and a...
  • Page 93 2-1. Instrument cluster meter control switch. switches. Driving information display (P.93) Driving support system information display (P.97) Audio system-linked dis- play (P.97) Vehicle information dis- play (P.97) : Select menu icons Settings display (P.98) : Change displayed Warning message display content, scroll up/down the (P.422) screen and move the cursor...
  • Page 94 2-1. Instrument cluster  EV Ratio/EV Driving Ratio consumption. Driving range ■ Speedometer display/Driv- ing range Displays driving range with remain- ing fuel.  Speedometer display This distance is computed based  Driving range on your average fuel consumption. As a result, the actual distance that Displays driving range with remain- can be driven may differ from that ing fuel.
  • Page 95 2-1. Instrument cluster ■ Hybrid System Indica- Eco area tor/ECO Accelerator Guid- Shows that the vehicle is being ance/Eco score driven in an Eco-friendly manner. By keeping the bar display within Eco area, more Eco-friendly driv- ing can be achieved. Power area Shows that an Eco-friendly driving range is being exceeded (during full...
  • Page 96 2-1. Instrument cluster within the Eco area. High Eco-friendly acceleration can be • After the hybrid system is started, achieved by keeping the accelera- the Eco score will not be dis- tor pedal operation display within played until the vehicle speed the range indicated by the blue bar.
  • Page 97 2-1. Instrument cluster ● The Hybrid System Indicator is not Vehicle information dis- operating. play ● The vehicle is being driven using the dynamic radar cruise control. ■ Drive information Displays drive information such as Driving support system the following: information display ■...
  • Page 98 2-1. Instrument cluster the average vehicle speed since indicator. the display was reset  : To reset, display the desired item Fuel economy display and press and hold the Select to change the average fuel meter control switch. consumption display between after start/after reset.
  • Page 99 2-1. Instrument cluster Suggestion function (if equipped)  Default setting Displays suggestions to the Select to reset the meter display settings to the default setting. driver in the following situations. To select a response to a dis- Vehicle functions and set- ■...
  • Page 100: Multi-Information Display (7-Inch Display)

    2-1. Instrument cluster Multi-information dis- the power switch is turned off, this suggestion message will not be dis- play (7-inch display) played. ■ Display and menu icons Customization Some functions can be customized. ■ Display (P.474) Content display area By selecting menu icons on the multi-information display, a variety of driving-related information can be displayed.
  • Page 101 2-1. Instrument cluster Driving information display (P.101) Driving support system information display (P.101) Audio system-linked dis- play (if equipped) (P.101) Vehicle information dis- play (P.101) : Select menu icons, scroll the screen and move Settings display (P.101) the cursor Warning message display : Change displayed (P.422) content, scroll the screen and...
  • Page 102 2-1. Instrument cluster ■ erence only. ECO Accelerator Guid- ance/Eco score Current fuel consumption ECO Accelerator Guidance Displays instantaneous current fuel consumption. Eco score Average fuel economy (after  ECO Accelerator Guidance start) To reset the average fuel economy display, press and hold the meter control switch.
  • Page 103 2-1. Instrument cluster Zone of Eco acceleration Not yet evaluated Displayed as a blue bar, and rep- resents an estimated suitable High accelerator pedal operation range for the current driving conditions, • After the hybrid system is started, such as starting off or cruising. the Eco score will not be dis- played until the vehicle speed This display changes according to...
  • Page 104 2-1. Instrument cluster  AWD Control radar cruise control. ■ Drive information Driving support system Displays drive information such as information display the following: ■ Driving support system information Select to display the operational status of the following systems:  Dynamic radar cruise control (P.244) ...
  • Page 105 2-1. Instrument cluster  EV indicator : To reset, display the desired item Select to enable/disable the EV and press and hold the indicator. meter control switch.  ■ AWD operation status dis- play • Fuel economy display Select to change the average fuel consumption display to any of the following: trip average/total aver- age/tank average.
  • Page 106 2-1. Instrument cluster display off. Suggestion function (if To turn the multi-information display equipped) on again, press any of the following meter control switches Displays suggestions to the driver in the following situations. To select a response to a dis- ...
  • Page 107: Energy Monitor/Consumption Screen

    2-1. Instrument cluster Energy monitor/con- the power switch is turned off, this suggestion message will not be dis- sumption screen played. You can view the status of your hybrid system on the multi-information display and the audio system screen. System components Audio system screen Multi-information display Meter control switches...
  • Page 108 2-1. Instrument cluster Multi-information display  Press to select (4.2-inch display) “Energy Monitor” and then press Multi-information display  (7-inch display) Press of the meter control switch to select Press to select “Energy Monitor” and then Gasoline engine press Hybrid battery (traction bat- Audio system screen tery) ...
  • Page 109 2-1. Instrument cluster Audio system screen follow the instructions displayed  on the screen to perform trouble shooting. ■ Hybrid battery (traction bat- tery) status Multi-information display  (4.2-inch display) Gasoline engine Front electric motor (traction motor) Hybrid battery (traction bat- tery) Rear electric motor (traction motor)
  • Page 110 2-1. Instrument cluster Audio system screen system was started.  Cruising range Use the displayed average fuel consumption as a reference. The image is an example only, and may vary slightly from actual condi- tions. ■ History fuel consumption High Displaying fuel consump- tion screen Select...
  • Page 111 2-1. Instrument cluster ■ Cruising range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
  • Page 112 2-1. Instrument cluster...
  • Page 113: Before Driving

    Before driving 3-1. Key information Keys ......3-2. Opening, closing and locking the doors Side doors ....Back door....Smart key system ..3-3. Adjusting the seats Front seats ....Rear seats....Head restraints.... 3-4. Adjusting the steering wheel and mirrors Steering wheel ....
  • Page 114: Keys

    The number of keys already regis- ● The standard battery life is 1 to 2 tered to the vehicle can be con- years. firmed. Ask your Toyota dealer for ● details. If the battery becomes low, an alarm will sound in the cabin and a...
  • Page 115: Wireless Remote Control

    Carry the electronic key 3.9 in. have not had a new electronic key (10 cm) or more away from elec- registered, ask your Toyota dealer to tric appliances that are turned on. check if an unknown electronic key Radio waves emitted from electric (other than those in your posses- appliances within 3.9 in.
  • Page 116 (P.125) will need the mechanical key. Sounds the alarm (P.116) (P.442) : This setting must be customized at your Toyota dealer. : If equipped ■ Panic mode When is pressed for longer than about one second, an alarm...
  • Page 117: Side Doors

    : This setting must be customized approximately 2 seconds at your Toyota dealer. unlocks all the doors. Grip : If equipped the front passenger’s door handle to unlock all the ■...
  • Page 118 3-2. Opening, closing and locking the doors windows and moon roof are operat- Multi-informa- Unlocking func- ing. tion display/Beep tion : If equipped Holding the ■ Security feature driver’s door If a door is not opened within handle unlocks approximately 60 seconds after the only the driver’s vehicle is unlocked using the entry door.
  • Page 119 3-2. Opening, closing and locking the doors If the smart key system or the ■ WARNING wireless remote control does not operate properly To prevent an accident ■ Use the mechanical key to lock and Observe the following precautions unlock the doors. (P.442) while driving the vehicle.
  • Page 120 3-2. Opening, closing and locking the doors The key may not be detected cor- Unlocking and locking the rectly and the door may be locked. doors from the inside ■ Open door warning buzzer If a door or the hood is not fully ■...
  • Page 121: Back Door

    3-2. Opening, closing and locking the doors Back door Function Operation All doors are auto- The back door can be matically locked Speed linked when vehicle locked/unlocked and door locking speed is approxi- opened/closed by the fol- function mately 12 mph (20 lowing procedures.
  • Page 122 3-2. Opening, closing and locking the doors Vehicles with a power back WARNING ● door: The power back door may Do not allow a child to open or ● suddenly shut if it is not opened close the back door. fully.
  • Page 123 Do not attach any matically after 20 minutes. accessories other than genuine Operation signals ■ Toyota parts to the back door. P.118...
  • Page 124 ● handle. rod with gloves or other fabric items. Do not attach any accessories ● other than genuine Toyota parts to the back door. Do not place your hand on the ● damper stay or apply lateral forces to it.
  • Page 125 3-2. Opening, closing and locking the doors Opening/closing the back door (vehicles with a power back door) ■ Opening/closing the back door using the wireless remote control Press and hold the switch. ■ Opening the back door Unlock the back door before oper- using the back door opener ating.
  • Page 126 3-2. Opening, closing and locking the doors again will operate the back door in matically closes. the opposite direction. ■ Back door closer ■ Closing the back door and In the event that the back door is left locking all of the doors slightly open, the back door closer using the lock switch on the will automatically close it to the fully...
  • Page 127 3-2. Opening, closing and locking the doors abled, the power back door will If the electronic key is placed ● not operate but can be opened inside the vehicle after starting a and closed manually. close operation via the door reserve lock function, the elec- When the power back door is ●...
  • Page 128 Do not door must then be operated attach any accessories other manually. Take extra care in this than genuine Toyota parts to the situation, as the back door may back door. open or close suddenly. Jam protection function ■...
  • Page 129 (P.474) spindle rod. Do not attach any accessories Select of the ● other than genuine Toyota parts multi-information display and to the back door. then press Do not place your hand on the ● spindle or apply lateral forces to 4.2-inch display meter...
  • Page 130 3-2. Opening, closing and locking the doors 7-inch display meter buzzer will sound 4 times.  • The next time the power back Press of meter con- door is opened, it will stop at trol switches, select the that position. “Vehicle Settings”...
  • Page 131: Smart Key System

    3-2. Opening, closing and locking the doors ■ Smart key system Effective range (areas within which the electronic key is detected) The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key.
  • Page 132 3-2. Opening, closing and locking the doors ● If the smart key system has not Correction Situation been used for 14 days or longer, procedure the doors cannot be unlocked from any door except the driver’s An attempt was Close all of door.
  • Page 133 3-2. Opening, closing and locking the doors ● Near a TV tower, electric power trol. plant, gas station, radio station, If the doors cannot be large display, airport or other facil- locked/unlocked using the above ity that generates strong radio methods, use the mechanical key.
  • Page 134 3-2. Opening, closing and locking the doors matically be locked after message may be shown on the approximately 60 seconds if the multi-information display and a doors are not opened and closed.) buzzer will sound outside the vehi- cle. To turn off the alarm, lock all ●...
  • Page 135 (P.474) of such medical devices. If the smart key system has ■ Ask your Toyota dealer for details been deactivated in a custom- on disabling the entry function. ized setting Locking and unlocking the doors: ●...
  • Page 136: 3-3. Adjusting The Seats

    3-3. Adjusting the seats Seat position adjustment Front seats 3-3.Adjusting the seats switch Seatback angle adjustment Adjustment procedure switch Manual seat  Seat cushion (front) angle adjustment switch Vertical height adjustment switch Lumbar support adjustment switch WARNING When adjusting the seat posi- ■...
  • Page 137: Rear Seats

    3-3. Adjusting the seats Rear seats WARNING To reduce the risk of sliding ● under the lap belt during a colli- The seatbacks of the rear sion, do not recline the seat seats can be folded down. more than necessary. If the seat is too reclined, the lap belt may slide past the hips and Folding down the rear...
  • Page 138 3-3. Adjusting the seats Check that the seat belts are WARNING ● not twisted or caught in the Observe the following precau- seatback. tions. Failure to do so may result If the seat belt gets caught in death or serious injury. between the seatback’s securing hook and latch, it may damage When folding the rear seat-...
  • Page 139: Head Restraints

    3-3. Adjusting the seats Rear outside seats ■ Head restraints Head restraints are provided for all seats. WARNING Head restraint precautions ■ Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. Pull the head restraints up.
  • Page 140 3-3. Adjusting the seats ■ ■ Rear outside seats Rear outside seats Pull the head restraint up while Align the head restraint with the pressing the lock release button installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
  • Page 141: Adjusting The Steering Wheel

    3-4. Adjusting the steering wheel and mirrors Steering wheel 3-4.Adjusting the steering wheel and mirrors After adjusting the steering ■ wheel Make sure that the steering wheel Adjustment procedure is securely locked. Otherwise, the steering wheel Hold the steering wheel and may move suddenly, possibly causing an accident, and resulting push the lever down.
  • Page 142: Inside Rear View Mirror

    3-4. Adjusting the steering wheel and mirrors reduced by operating the lever. Inside rear view mirror The rear view mirror’s posi- tion can be adjusted to enable sufficient confirma- tion of the rear view. Adjusting the height of rear view mirror Normal position The height of the rear view mir- Anti-glare position...
  • Page 143: Outside Rear View Mirrors

    3-4. Adjusting the steering wheel and mirrors Outside rear view mir- To prevent sensor error (vehi- ■ rors cles with an auto anti-glare inside rear view mirror) To ensure that the sensors operate The rear view mirror’s posi- properly, do not touch or cover tion can be adjusted to them.
  • Page 144 3-4. Adjusting the steering wheel and mirrors Adjustment procedure WARNING When the mirror defoggers ■ To select a mirror to adjust, are operating turn the switch. Do not touch the rear view mirror surfaces, as they can become very hot and burn you. Folding the mirrors Push the mirror back in the direction of the vehicle’s rear.
  • Page 145: Opening And Closing The Win

    3-5. Opening and closing the windows Power windows between the window and the win- 3-5.Opening and closing the windows dow frame while the window is clos- ing, window movement is stopped and the window is opened slightly. Opening and closing the ■...
  • Page 146 Check to make sure that all pas- ● be fully closed or opened, have the sengers do not have any part of vehicle inspected by your Toyota their body in a position where it dealer. could be caught when a window is being operated.
  • Page 147 3-5. Opening and closing the windows WARNING Jam protection function ■ Never use any part of your body ● to intentionally activate the jam protection function. The jam protection function may ● not work if something gets jammed just before the window is fully closed.
  • Page 148: Moon Roof

    The moon roof can be opened ■ Tilting up and down using the wireless remote control. (P.117) : These settings must be custom- ized at your Toyota dealer. ■ When the moon roof does not close normally Perform the following procedure: ●...
  • Page 149 3-5. Opening and closing the windows Press and hold the “CLOSE” even after performing the above procedure correctly, have the vehi- switch. cle inspected by your Toyota dealer. The moon roof will close, reopen Customization ■ and pause for approximately 10 sec- Some functions can be customized.
  • Page 150 3-5. Opening and closing the windows The jam protection function may WARNING ● not work if something gets Check to make sure that all pas- ● caught just before the moon sengers do not have any part of roof is fully closed. Also, the jam their body in a position where it protection function is not could be caught when the moon...
  • Page 151: Favorite Settings

    3-6. Favorite settings My Settings ® 3-6.Favorite settings  Bluetooth device An individual is identified when a ® Drivers are identified using Bluetooth device is connected to devices such as electronic the audio system. For information ® keys to store the vehicle on how to connect Bluetooth devices, refer to the “Multimedia settings for each.
  • Page 152 3-6. Favorite settings...
  • Page 153: Driving

    Driving Toyota Safety Sense 3.0 4-1. Before driving ........Driving the vehicle..PCS (Pre-Collision System) Cargo and luggage ........Vehicle load limits ..LTA (Lane Tracing Assist) Trailer towing..........Dinghy towing ..... LDA (Lane Departure Alert) ........4-2. Driving procedures...
  • Page 154 Driving Winter driving tips ..Utility vehicle precautions ........
  • Page 155 4-1. Before driving Driving the vehicle Do not press the shift release but- 4-1.Before driving ton after shifting the shift position to The following procedures Press the power switch to should be observed to stop the hybrid system. ensure safe driving: Slowly release the brake pedal.
  • Page 156 • When backing up, you may twist Breaking in your new Toyota ■ your body around, leading to a To extend the life of the vehicle, difficulty in operating the pedals.
  • Page 157 4-1. Before driving Do not adjust the positions of WARNING ● the steering wheel, the seat, or The driver should pay extra ● the inside or outside rear view attention to pedestrians when mirrors while driving. the vehicle is powered only by Doing so may result in a loss of the electric motor (traction vehicle control.
  • Page 158 Have the brake pads checked and When shifting the shift lever ■ replaced by your Toyota dealer as Do not let the vehicle roll back- ● soon as possible. ward while a forward driving position is selected, or roll for- Rotor damage may result if the ward while the shift lever is in R.
  • Page 159 4-1. Before driving Do not leave a door or window WARNING ● open if the curved glass is Avoid revving or racing the ● coated with a metallized film engine. such as a silver-colored one. Running the engine at high Reflected sunlight may cause speed while the vehicle is the glass to act as a lens, caus-...
  • Page 160 4-1. Before driving Avoiding damage to vehicle WARNING ■ parts Do not pump the brake pedal if ● Do not turn the steering wheel ● the engine stalls. fully in either direction and hold Each push on the brake pedal it there for an extended period uses up the reserve for the of time.
  • Page 161 4-1. Before driving tion, deactivate TRAC (P.295) so NOTICE that the vehicle may become able to escape from the mud or fresh snow. Brake function ● Changes in the quantity and ● quality of the engine oil, transfer oil (AWD models), rear differen- tial oil (AWD models), etc.
  • Page 162: Cargo And Luggage

    4-1. Before driving 750 (5  150) = 650 lbs.) Cargo and luggage (5) Determine the combined weight of luggage and cargo Take notice of the following being loaded on the vehicle. information about storage That weight may not safely precautions, cargo capacity exceed the available cargo and and load:...
  • Page 163 4-1. Before driving be C lb. (kg) as follows: Receptacles containing gaso- ● line lb. (kg) - A lb. (kg) = C Aerosol cans (kg) ● Storage precautions : A =Weight of people ■ Observe the following precau- : B =Total load capacity tions.
  • Page 164 4-1. Before driving WARNING NOTICE Even if the total load of occu- When loading cargo (vehi- ● ■ pant’s weight and the cargo cles with a moon roof) load is less than the total load Be careful not to scratch the sur- capacity, do not apply the load face of the moon roof.
  • Page 165: Vehicle Load Limits

    4-1. Before driving Vehicle load limits WARNING Overloading the vehicle ■ Vehicle load limits include Do not overload the vehicle. It may not only cause damage to total load capacity, seating the tires, but also degrade steer- capacity, towing capacity ing and braking ability, resulting in and cargo capacity.
  • Page 166: Trailer Towing

    4-1. Before driving Trailer towing Toyota warranties do not apply to damage or mal- function caused by towing a Your vehicle is designed pri- trailer for commercial pur- marily as a passen- poses. ger-and-load-carrying vehicle. Towing a trailer can Contact your Toyota dealer...
  • Page 167 • Check the tires of the vehicle and transfer, rear differential or wheel the trailer. bearing), Toyota recommends that • Check the load in the trailer. you do not tow a trailer until the Make sure the load has not vehicle has been driven for over 500 shifted.
  • Page 168 Do not make jerky, abrupt or ● When towing a trailer ■ sharp turns. Toyota recommends trailers with Do not apply the brakes sud- ● brakes that conform to any appli- denly as you may skid, resulting cable federal and state/provincial in jackknifing and loss of vehicle regulations.
  • Page 169 If the gross trailer weight ● The maximum allowable gross exceeds unbraked TWR, trailer brakes are required. Toyota rec- vehicle weight. The gross vehi- ommends trailers with brakes cle weight is the total weight of that conform to all applicable the vehicle.
  • Page 170 4-1. Before driving Rear GAWR ■ TWR (Trailer Weight Rating) The maximum allowable gross trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. TWR is calculated assuming Without brakes base vehicle with one driver, ■...
  • Page 171 Toyota dealer. weight varies in accordance  If you wish to install a trailer with the types of trailers or hitch, contact your Toyota towing as described below. dealer.  To ensure the recommended  Use only a hitch that con-...
  • Page 172 Do not directly splice trailer ■ Use only the position recom- lights mended by your Toyota dealer. Do not directly splice trailer lights. Do not install the trailer hitch on Directly splicing trailer lights may the bumper; this may cause body damage your vehicle’s electrical...
  • Page 173 Do not exceed the someone guide you when posted towing speed limit. reversing to reduce the risk of  Toyota recommends that the an accident. vehicle-trailer speed limit is 65  As stopping distance is mph (104 km/h) on a flat, increased when towing a straight, dry road.
  • Page 174 4-1. Before driving considerable distance. After in a safe spot. (P.449) passing a vehicle, do not for-  Always place wheel blocks get the length of your trailer, under both the vehicle’s and and be sure you have plenty the trailer’s wheels when of room before changing parking.
  • Page 175: Dinghy Towing

    4-1. Before driving Have someone retrieve the Dinghy towing blocks. Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to ■ your vehicle Do not tow your vehicle with the four wheels on the ground.
  • Page 176: Driving Procedures Power (Ignition) Switch

    The immobilizer system may not not necessary to press and hold the have been deactivated. (P.78) switch. Contact your Toyota dealer. If the “READY” indicator turns on, ● If a message related to start-up is the hybrid system will operate nor- shown on the multi-information mally.
  • Page 177: Stopping The Hybrid System

    ■ P.114 If the hybrid system becomes diffi- Conditions affecting operation ■ cult to start, have your vehicle P.132 checked by your Toyota dealer immediately. Notes for the entry function ■ P.133 Symptoms indicating a mal- ■ function with the power Electronic key battery ■...
  • Page 178 4-2. Driving procedures Release the brake pedal and WARNING check that “ACCESSORY” or Stopping the hybrid system ■ “IGNITION ON” is not shown in an emergency on the multi-information dis- If you want to stop the hybrid ● play. system in an emergency while driving the vehicle, press and hold the power switch for more Automatic hybrid system shut...
  • Page 179 4-2. Driving procedures WARNING The emergency flashers can be Do not leave the vehicle with ● used. the hybrid system operating for a long time. If such a situation cannot be avoided, park the vehicle in an open space and Some electrical components such ensure that exhaust fumes do as the audio system can be used.
  • Page 180 4-2. Driving procedures Check that “ACCESSORY” When the safe exit assist is oper- ● ating, a buzzer will sound and a or “IGNITION ON” on the voice guidance will be given. multi-information display are (vehicles with safe exit assist) off. NOTICE NOTICE To prevent 12-volt battery dis-...
  • Page 181: Ev Drive Mode

    4-2. Driving procedures EV drive mode buzzer will sound and a message will be shown on the multi-informa- tion display. ● In EV drive mode, electric The temperature of the hybrid sys- tem is high. power is supplied by the The vehicle has been left in the hybrid battery (traction bat- sun, driven on a hill, driven at high...
  • Page 182 4-2. Driving procedures is canceled, a buzzer will sound, the If “EV Mode Deactivated” is ■ EV drive mode indicator will flash, shown on the multi-information and a message will be displayed on display the multi-information display. The EV drive mode has been auto- The hybrid battery (traction bat- matically canceled.
  • Page 183: Hybrid Transmission

    4-2. Driving procedures Hybrid transmission WARNING When driving on slippery ■ road surfaces Select the shift position Do not accelerate or shift gears depending on your purpose suddenly. and situation. Sudden changes in engine brak- ing may cause the vehicle to spin or skid, resulting in an accident.
  • Page 184 Have the vehicle shift lever is shifted out of P, the inspected by your Toyota dealer vehicle may suddenly start, possi- immediately. bly leading to an accident result- The following steps may be used as ing in death or serious injury.
  • Page 185: Selecting The Driving Mode

    4-2. Driving procedures NOTICE Hybrid battery (traction bat- ■ tery) charge If the shift lever is in N, the hybrid battery (traction battery) will not be charged even when the engine is running. Therefore, if the vehi- cle is left with the shift lever in N for a long period of time, the hybrid battery (traction battery) Upshifting...
  • Page 186 S This may indicate a malfunction in the transmission system. Have the vehicle inspected by your Toyota dealer immediately. (In this situation, the transmission will operate in the same manner as when the shift lever is in D.)
  • Page 187: Turn Signal Lever

    4-2. Driving procedures Turn signal lever burned out. Operating instructions Right turn Lane change to the right (move the lever partway and release it) The right hand signals will flash 3 times. Lane change to the left (move the lever partway and release it) The left hand signals will flash 3 times.
  • Page 188: Parking Brake

    4-2. Driving procedures Parking brake Pull the switch to set the parking brake. The parking brake indicator light The parking brake can be and the parking brake switch indi- set or released automati- cator will turn on. cally or manually. Pull and hold the parking brake switch if an emergency occurs and In automatic mode, the...
  • Page 189 4-2. Driving procedures sounds and a message is shown on the multi-information display. When the automatic mode is turned on, the parking brake operates as follows.  When the shift lever is shifted ■ Parking brake operation from P, the parking brake will ●...
  • Page 190 P.300 after operating the switch several times, the system may be malfunc- tioning. Have the vehicle inspected WARNING by your Toyota dealer. When parking the vehicle ■ Parking brake operation sound ■ Do not leave a child in the vehicle When the parking brake operates, a alone.
  • Page 191: Brake Hold

    4-2. Driving procedures Brake Hold WARNING Parking brake automatic lock ■ function The brake hold system Never use the automatic parking keeps the brake applied brake engagement function in when the shift lever is in D, place of normal parking brake S or N with the system on operation.
  • Page 192 If the brake pedal is left released ● tem may be malfunctioning. Have for a period of about 3 minutes the vehicle inspected at your Toyota after the system has started hold- dealer. ing the brake, the parking brake If “Brake Hold Malfunction will be set automatically.
  • Page 193 4-2. Driving procedures WARNING When stopped on a slippery ■ road The system cannot stop the vehi- cle when the gripping ability of the tires has been exceeded. Do not use the system when stopped on a slippery road. NOTICE When parking the vehicle ■...
  • Page 194: Operating The Lights And Wip- Ers Headlight Switch

    4-3. Operating the lights and wipers Headlight switch daytime running lights) turn 4-3.Operating the lights and wipers The headlights can be oper- ated manually or automati- Type B  cally. Operating instructions Operating the switch turns on the lights as follows: Type A ...
  • Page 195 4-3. Operating the lights and wipers nate using the same lights as the switch is turned to ACC or OFF. headlights and illuminate darker (The lights turn off immediately if than the headlights. on the key is pressed after all ●...
  • Page 196 4-3. Operating the lights and wipers When any of the following are per- AFS (Adaptive Front-light- formed, the 12-volt battery-saving ing System) (if equipped) function is canceled once and then reactivated. All the lights will turn off automatically 20 minutes after the AFS (Adaptive Front-lighting 12-volt battery-saving function has System) secures excellent visi-...
  • Page 197: Ahb (Automatic High Beam)

    4-3. Operating the lights and wipers Turn the headlight switch to AHB (Automatic High Beam) position. When the headlight switch lever is The Automatic High Beam in the low beam position, the AHB system will be enabled and the uses a front camera located AHB indicator will illuminate.
  • Page 198 4-3. Operating the lights and wipers • When vehicles ahead are repeat- roundings. This may cause the edly detected and then hidden low beams to remain on or the due to repeated curves, road high beams to flash or dazzle dividers or roadside trees pedestrians or vehicles ahead.
  • Page 199 4-3. Operating the lights and wipers position quickly 10 times, then leave the lever in its original posi- tion. If the sensitivity is changed, the Automatic High Beam indicator will blink 3 times. Turning the high beams on/off manually ■ Changing to the high Temporarily changing to beams...
  • Page 200: Fog Light Switch

    4-3. Operating the lights and wipers Fog light switch Windshield wipers and washer : If equipped The fog lights secure excel- Operating the lever can use lent visibility in difficult driv- the windshield wipers or the ing conditions, such as in washer.
  • Page 201 When a nozzle becomes ■ blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged. Washer/wiper dual operation Pulling the lever operates the wip- ers and washer.
  • Page 202: Rear Windshield Wiper And Washer

    4-3. Operating the lights and wipers Rear windshield wiper and washer : If equipped NOTICE When the rear window is dry ■ Do not use the wiper, as it may damage the rear window. Washer/wiper dual operation Operating the wiper lever Pushing the lever operates the wiper and washer.
  • Page 203 4-3. Operating the lights and wipers NOTICE When a nozzle becomes ■ blocked In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
  • Page 204: 4-4. Refueling

    4-4. Refueling Opening the fuel tank 4-4.Refueling After exiting the vehicle and ● before opening the fuel door, touch an unpainted metal sur- face to discharge any static electricity. It is important to dis- The fuel tank of your vehicle charge static electricity before has a special structure, refueling because sparks result-...
  • Page 205: Closing The Fuel Tank Cap

    4-4. Refueling opener. WARNING Do not top off the fuel tank. ● NOTICE Refueling ■ Do not spill fuel during refueling. ● Doing so may damage the vehi- cle, such as causing the emis- sion control system to operate abnormally or damaging fuel Turn the fuel tank cap slowly system components or the vehi- and remove it, then hang it...
  • Page 206 WARNING When replacing the fuel tank ■ Do not use anything but a genu- ine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or seri- ous injury.
  • Page 207: 4-5. Using The Driving Support Systems

    Toy- trols, use, warnings/precautions, ota App. etc. of each function of Toyota Safety Sense 3.0, refer to the Digital Owner’s Manual at the Owner’s Manual website. If the software of this system...
  • Page 208 ON. ● Toyota Safety Sense 3.0 can still be used while a software update is being performed. ■ What can be checked using the...
  • Page 209: Toyota Safety Sense

    ● performing driving operations or a system malfunction occurs, a warning message or warning buzzer will be operated. If a The Toyota Safety Sense 3.0 warning message is displayed consists of the driving on the display, follow the instructions displayed.
  • Page 210 P.259 When the tires are excessively ● worn or the inflation pressure of Sensors used by Toyota the tires is low Safety Sense 3.0 When tires other than the manu- ● facturer specified size are...
  • Page 211 To prevent malfunction of the ■ or replace them with anything radar sensors other than Toyota genuine parts. Observe the following precau- In the following situations, recal- ● tions. Failure to do so may lead to...
  • Page 212 If the system determines that the For details, contact your Toyota windshield may be fogged up, it dealer. will automatically operate the heater to defog the part of the Do not allow liquids to contact ●...
  • Page 213 4-5. Using the driving support systems • Truss bridges ■ Situations in which the sensors • Gravel roads may not operate properly • Rutted, snow-covered roads • Walls ● When the height or inclination of • Large trucks the vehicle has been changed due •...
  • Page 214 4-5. Using the driving support systems ● has become extremely short Immediately after changing lanes or passing through an intersection ● When a detectable vehicle is at an ● angle When driving in a temporary lane or lane regulated by construction ●...
  • Page 215: Pcs (Pre-Collision System)

    4-5. Using the driving support systems PCS (Pre-Collision Sys- WARNING tem) For safe use ■ Driving safely is solely the ● responsibility of the driver. Pay The pre-collision system careful attention to the sur- uses sensors to detect rounding conditions in order to objects (P.215) in the path ensure safe driving.
  • Page 216 4-5. Using the driving support systems  Motorcycles  Walls : Detected as a detectable object only when being ridden. System functions ■ Pre-collision warning ■ Pre-collision brake assist When the system determines that the possibility of a collision If the system determines that is high, a buzzer will sound and the possibility of a collision is an icon and warning message...
  • Page 217 4-5. Using the driving support systems steering wheel pedestrian or bicycle is detected During assistance, the pre-colli- sion warning will operate and a message will be displayed to warn the driver. ■ Intersection collision avoid- ance support (crossing vehicles) ■ Intersection collision avoid- At an intersection, etc., if the ance support (left/right...
  • Page 218 4-5. Using the driving support systems tem output will be restrained or If the brake pedal is being ● the brakes will be applied depressed, the system may determine that the driver is tak- weakly to restrict acceleration. ing evasive action and possibly During operation, a buzzer will delay the operation timing of the sound and a warning indicator...
  • Page 219 4-5. Using the driving support systems WARNING • While the emergency steering assist is operating, if the steer- ing wheel is held or turned in the opposite direction of system operation, emergency steering assist operation will be can- celed. Operating conditions of each function of the pre-collision system ■...
  • Page 220 4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding vehicles, Approximately 20 to 110 Approximately 7 to 110 stopped vehicles mph (30 to 180 km/h) mph (10 to 180 km/h) Approximately 20 to 50 Approximately 20 to 50 Bicycles mph (30 to 80 km/h)
  • Page 221 4-5. Using the driving support systems Relative speed between Detectable objects Vehicle speed your vehicle and object Preceding vehicles, stopped vehicles, bicy- Approximately 25 to 50 Approximately 25 to 50 cles, pedestrians, mph (40 to 80 km/h) mph (40 to 80 km/h) motorcycles While the emergency steering assist is operating, if any of the following are performed, emergency steering assist operation may be cancelled:...
  • Page 222 4-5. Using the driving support systems When driving at approximately 29 The system operates only when the mph (40 km/h) or more, this system crossing vehicle speed is same as will only operate when the speed of or less than the vehicle speed. the other vehicle is approximately 29 mph (40 km/h) or less.
  • Page 223 4-5. Using the driving support systems the vehicle • When turning left/right and an oncoming vehicle turns left/right in front of the vehicle • When passing a detectable object which is stopped to make a left/right turn • When the steering wheel is oper- ated toward the path of an oncom- ing vehicle •...
  • Page 224 4-5. Using the driving support systems luggage, umbrella, guardrail, etc.) vehicle • When multiple detectable objects • When turning left/right and the are overlapping direction of the vehicle differs • When a bright light, such as the greatly from the direction traffic sun, is reflecting off of a detect- flows in the oncoming lane able object...
  • Page 225: Lta (Lane Tracing Assist)

    4-5. Using the driving support systems LTA (Lane Tracing • When the wall is slanted or low • When the wall is narrow, such as Assist) a pole, etc. • When the wall is made of plants, such as a hedge, etc. LTA functions •...
  • Page 226 4-5. Using the driving support systems  When the function is operat- WARNING ing, if the vehicle is likely to Before using the LTA system ■ depart from its lane, the driver Do not overly rely on the LTA ● will be alerted via a display system.
  • Page 227 4-5. Using the driving support systems the following conditions are met: sound to alert the driver. ● ● The LTA system detects lane lines If steering wheel operation equiv- or the path of preceding or sur- alent to that necessary for a lane rounding vehicles.
  • Page 228 4-5. Using the driving support systems Enabling/disabling the When a preceding or surround- ● ing vehicle is swaying (Your system vehicle may sway accordingly and depart from the lane) The LTA will change between When a preceding or surround- ● ON/OFF each time the LTA ing vehicle departs from a lane switch is pressed.
  • Page 229 4-5. Using the driving support systems Operation display of steering wheel operation support The operating state of the LTA system is indicated. Lane dis- Steering Indicator Situation play icon LTA is on standby White Gray/White Gray LTA is operating Green Green Green The vehicle is departing the lane...
  • Page 230: Lda (Lane Departure Alert)

    4-5. Using the driving support systems LDA (Lane Departure such as a curb, guardrail, etc. Alert) Basic functions The LDA system warns the driver if the vehicle may deviate from the current lane or course and also can slightly operate the steering wheel to help avoid deviation from the lane or course...
  • Page 231 4-5. Using the driving support systems : Boundary between the asphalt and grass, soil, etc., or structures, such as a curb, guardrail, etc. WARNING Before using the LDA system ■ Do not overly rely on the LDA ● Break suggestion function ■...
  • Page 232 4-5. Using the driving support systems This function is operable when all of angle, etc., operation of the lane the following conditions are met: departure prevention function may • The vehicle speed is approxi- not be felt or the function may not mately 30 mph (50 km/h) or more.
  • Page 233 4-5. Using the driving support systems When the system determines that : For Peruto rico ● the driver is not securely holding the steering wheel, or the steering Changing LDA settings wheel is not being operated when the steering assist operation of the lane departure prevention function ...
  • Page 234 4-5. Using the driving support systems Displays and system operation The operating state of the lane departure alert function and steering assist operation of the lane departure prevention function are indi- cated. Lane dis- Steering Indicator Situation play icon Not illumi- nated Not illumi- Not illumi-...
  • Page 235 4-5. Using the driving support systems Lane dis- Steering Indicator Situation play icon Lane departure prevention function is operating for the side which the lane display is illuminated Green Green Green Lane departure alert function/lane departure prevention function is operating for the side which the lane Yellow Yellow display is flashing...
  • Page 236: Pda (Proactive Driving Assist)

    4-5. Using the driving support systems PDA (Proactive driv- The proactive driving assist is ● not a system which reduces the ing assist) amount of attention necessary for safe driving. Even if the sys- tem is operating correctly, the When a detectable object surrounding conditions as rec- (P.237) is detected, the ognized by the driver and...
  • Page 237 4-5. Using the driving support systems System operating conditions and detectable objects According to the driving conditions, the operation and detectable objects of the proactive driving assist will change as follows. Detectable Function Conditions Operation objects Assistance with some brake opera- A detectable ...
  • Page 238 4-5. Using the driving support systems control) Vehicle speeds at which the ■ • When the system determines that system can operate a detected object has moved away from the vehicle Detectable object crossing the ● • When lane lines can no longer be road assistance detected Approximately 20 to 35 mph (30 to...
  • Page 239 4-5. Using the driving support systems If a parked vehicle is perpendic- WARNING ● ular or at an angle to the vehicle When driving on snowy, icy, or ● rutted roads When a bicycle is a child sized ● bicycle, is carrying a large load, When a detectable object is ●...
  • Page 240 4-5. Using the driving support systems can be enabled/disabled WARNING through a customize setting. When entering a curve, driving ● (P.474) around a curve and a few sec- onds after driving around a  The following settings of the curve proactive driving assist can be changed through customize Changing proactive driv-...
  • Page 241 4-5. Using the driving support systems Icon Meaning Warning to maintain appropriate vehicle-to-vehicle dis- tance Curve deceleration assistance is being performed driver does not operate the brake ■ Hands off steering wheel warn- pedal or accelerator pedal and the ing operation vehicle approaches the preceding vehicle, the display will flash and a In the following situations, a mes-...
  • Page 242: Rsa (Road Sign Assist)

    4-5. Using the driving support systems detects a sign or information RSA (Road Sign of a sign is available from the Assist) navigation system, the sign will be displayed on the dis- : If equipped play. The RSA system detects ...
  • Page 243 4-5. Using the driving support systems ● When a sign is immediately after a area, the do not enter sign freeway junction or in an adjacent displayed on the display will lane just before merging flash and a buzzer will sound. ●...
  • Page 244: Dynamic Radar Cruise Control

    4-5. Using the driving support systems Dynamic radar cruise control No Turn On Red This dynamic radar cruise control detects the pres- Stop ence of vehicles ahead, determines the current vehi- cle-to-vehicle distance, and Yield operates to maintain a suit- able distance from the vehi- cle ahead.
  • Page 245 4-5. Using the driving support systems The dynamic radar cruise control WARNING determines whether the distance Set the speed appropriately ● between the driver’s own vehicle according to the speed limit, and a designated preceding vehi- traffic flow, road conditions, cle is within a set range.
  • Page 246 4-5. Using the driving support systems Basic functions Constant speed cruising: When there are no vehicles ahead The vehicle drives at the speed set by the driver. If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display will blink and a buzzer will sound.
  • Page 247 4-5. Using the driving support systems formed, the controlled stop will continue. System Components Using the dynamic radar cruise control ■ Meter display Setting the vehicle speed Press the driving assist mode select switch to select dynamic radar cruise control. The dynamic radar cruise control indicator will illuminate.
  • Page 248 4-5. Using the driving support systems vehicle speed. or decreases by 1 mph (1.6 km/h) each time the switch is pressed Long press adjustment: Increases or decreases in 1 mph (1.6 km/h) increments continuously while the switch is pressed and held For Canada ...
  • Page 249 4-5. Using the driving support systems brake pedal is depressed. Press the “RES” switch to resume control. (If the vehicle has been stopped by system control, depressing the brake pedal will not cancel control.) Changing the vehicle-to-vehicle distance Each time the switch is pressed, the vehicle-to-vehicle distance set- ting will change as follows: If a preceding vehicle is detected, the preceding vehicle mark will be dis- played.
  • Page 250 4-5. Using the driving support systems vehicle speed. However, while in automatically. vehicle-to-vehicle distance control ● Situations in which some or all of mode, the vehicle speed may the functions of the system cannot decrease to below the set vehicle operate: P.214 speed in order to maintain the dis- ■...
  • Page 251 4-5. Using the driving support systems vehicle speed will then return to the Approach warning set vehicle speed. In situations where the vehicle In situations where vehicle-to-vehi- cle distance control needs to oper- approaches a preceding vehicle ate, such as when a preceding and the system cannot provide vehicle cuts in front of your vehicle, sufficient deceleration, such as...
  • Page 252 4-5. Using the driving support systems lane is the passing lane may be If your vehicle is being driven at based solely on the location of the approximately 50 mph (80 km/h) or steering wheel in the vehicle more and the lane is changed to (left-hand drive/right-hand drive).
  • Page 253 4-5. Using the driving support systems Indicator Multi-information display Situation Vehi- cle-to-vehi- cle distance setting: Blue Set vehicle Follow-up speed: cruising Green Green Preceding vehicle: White Vehi- cle-to-vehi- cle distance setting: Orange flashing Approach Set vehicle warning speed: Green Green Preceding vehicle: Orange...
  • Page 254 4-5. Using the driving support systems Indicator Multi-information display Situation Set vehicle speed: Set vehicle Green in speed being reverse dis- exceeded Green play Vehi- cle-to-vehi- cle distance setting: Gray Vehicle in Set vehicle controlled speed: stop Green White Preceding vehicle: Gray...
  • Page 255: Cruise Control

    4-5. Using the driving support systems Cruise control Vehicle speed may exceed the set speed when driving down a steep hill. The vehicle can be driven at When it is necessary to disable ● a set speed even if the the system: P.209 accelerator pedal is not depressed.
  • Page 256 4-5. Using the driving support systems Using the cruise control Adjusting the set vehicle speed Setting the vehicle speed  Adjusting the set vehicle speed using the switches Press the driving assist mode To change the set vehicle select switch to select cruise speed, press the “+”...
  • Page 257 4-5. Using the driving support systems Canceling/resuming con- ■ Automatic cancellation of the trol cruise control In the following situations, the cruise control will be canceled automati- cally: ● When the vehicle speed drops approximately 10 mph (16 km/h) or more below the set vehicle speed ●...
  • Page 258 4-5. Using the driving support systems Indicator Multi-information display Situation Cruise con- Blank trol being White Set vehicle Constant speed: speed cruis- Green Green Set vehicle speed: Set vehicle Green in speed being reverse dis- exceeded Green play...
  • Page 259: Emergency Driving Stop System

    4-5. Using the driving support systems Emergency Driving Although the emergency driv- ● ing stop system is designed to Stop System decelerate the vehicle within its lane to help avoid or help reduce the impact of a collision The emergency driving stop if the system determines that it system is a system which is difficult for the driver to con-...
  • Page 260 4-5. Using the driving support systems operate: P.214 Through control state “Warning ■ phase 1” and “Warning phase LTA control when operation is canceled 2”, the system determines if the When emergency driving stop sys- driver is aware and responsive tem operation is canceled, LTA con- while outputting a warning and trol may also be canceled.
  • Page 261: Bsm (Blind Spot Monitor)

    4-5. Using the driving support systems the brake lights may illuminate, BSM (Blind Spot Moni- depending on the road conditions, tor) etc. : If equipped Deceleration stop phase The Blind Spot Monitor is a system that uses rear side After entering the deceleration radar sensors installed on stop phase, a buzzer will sound the inner side of the rear...
  • Page 262 If the message does not disappear, turn signal lever is operated toward have the vehicle inspected by the detected side, the outside rear your Toyota dealer. view mirror indicator flashes. Driving assist information indicator Illuminates when the Blind Spot Monitor is turned off.
  • Page 263 Each time the power switch is If a sensor or the rear bumper ● turned to ON, the Blind Spot needs to be removed/installed or replaced, contact your Toyota Monitor is enabled. dealer. Blind Spot Monitor operation Objects that can be detected while driving ■...
  • Page 264 4-5. Using the driving support systems Vehicles that are traveling in areas that are not visible using the outside rear view mirrors (the blind spots) Vehicles that are approaching rapidly from behind in areas that are not visible using the outside rear view mirrors (the blind spots) ■...
  • Page 265 4-5. Using the driving support systems ■ tional when all of the following con- Conditions under which the ditions are met: system may not function cor- rectly ● The power switch is in ON. ● The Blind Spot Monitor may not ●...
  • Page 266: Rcta (Rear Cross Traffic Alert)

    4-5. Using the driving support systems Monitor is turned on RCTA (Rear Cross Traf- • When towing with the vehicle fic Alert) Instances of the Blind Spot Moni- ● tor unnecessarily detecting a vehi- cle and/or object may increase in : If equipped the following situations: The RCTA function uses the...
  • Page 267 4-5. Using the driving support systems illustration. System components Driving assist information indicator Illuminates when the RCTA is turned off. At this time, “Rear Cross Traffic Alert OFF” will be displayed on the multi-information display. Turning the RCTA func- tion on/off Meter control switches The RCTA can be enabled/dis- Operate the meter control switches...
  • Page 268 4-5. Using the driving support systems approaching from the right or left at the rear of the vehicle and alerts the driver of the presence of such vehicles by flashing the outside rear view mirror indicators and sounding a buzzer. Approaching vehicles Detection areas of approaching vehicles ■...
  • Page 269 4-5. Using the driving support systems sensor or the system is temporar- Approaching Approximate ily unavailable. vehicle speed alert distance ● When the operating function is disabled manually. 34 mph (56 131 ft. (40 m) ● When the power switch is turned km/h) (fast) off.
  • Page 270 4-5. Using the driving support systems situations: ● When the sensor is misaligned due to a strong impact to the sen- sor or its surrounding area ● When mud, snow, ice, a sticker, etc., is covering the sensor or sur- rounding area on the position above the rear bumper ●...
  • Page 271 4-5. Using the driving support systems ■ Situations in which the system while approaching the vehicle may operate even if there is no possibility of a collision Instances of the RCTA function unnecessary detecting a vehicle and/or object may increase in the following situations: ●...
  • Page 272: Safe Exit Assist

    4-5. Using the driving support systems Safe Exit Assist System components : If equipped The safe exit assist is a sys- tem that uses rear side radar sensors installed on the inner side of the rear bumper to help occupants judge if an approaching vehicle or bicycle may col- lide with a door when open-...
  • Page 273 10 minutes. If (P.474) the warning message does not disappear, have the vehicle WARNING inspected by your Toyota dealer. To ensure the system can ■ operate properly Safe exit assist sensors are installed behind the left and right sides of the rear bumper respec- tively.
  • Page 274 If a sensor or the rear bumper ● (P.474) needs to be removed/installed or replaced, contact your Toyota When the safe exit assist is off, dealer. the driving assist information Do not paint the rear bumper ●...
  • Page 275 4-5. Using the driving support systems Approximately 145 ft. (45 m) rearward from the front door : The faster a vehicle or bicycle is approaching, the distance at which an outside rear view mirror indicator will illuminate or blink will become fur- ther.
  • Page 276 4-5. Using the driving support systems ■ Conditions under which the approaches from behind your system may not function cor- vehicle at an angle rectly • When the vehicle is stopped at an angle to the road ● The Safe exit assist may not •...
  • Page 277: Intuitive Parking Assist

    4-5. Using the driving support systems Intuitive parking system screen, refer to the assist “MULTIMEDIA OWNER’S MAN- UAL”. : If equipped The distance from your vehicle to objects, such as a wall, when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the audio system screen and a buzzer.
  • Page 278 If subjected to an The system can be operated ■ impact, have the vehicle when inspected by Toyota dealer. If the front or rear bumper needs The power switch is in ON. ● to be removed/installed or Intuitive parking assist function is ●...
  • Page 279 Have ■ Situations in which the system the vehicle inspected by your Toyota may not operate properly dealer. Certain vehicle conditions and the ■ Sensor detection information surrounding environment may affect ●...
  • Page 280 4-5. Using the driving support systems ● If objects draw too close to the sensor. ● When a pedestrian is wearing clothing that does not reflect ultra- sonic waves (ex. skirts with gath- ers or frills). ● When objects that are not perpen- dicular to the ground, not perpen- dicular to the vehicle traveling ●...
  • Page 281 4-5. Using the driving support systems ● If the orientation of a sensor has System detection range been changed due to a collision or other impact ■ Detection range of the sen- ● The vehicle is approaching a tall sors or curved curb ●...
  • Page 282 4-5. Using the driving support systems Approximate distance to obstacle Buzzer 1.5 ft. to 1.0 ft. (45 cm to 30 cm)* Fast Less than 1.0 ft. (30 cm), Continuous Less than 0.5 ft. (15 cm)* : Automatic buzzer mute function is enabled. (P.282) ■...
  • Page 283: Pksb (Parking Support Brake)

    4-5. Using the driving support systems PKSB (Parking Sup- WARNING port Brake) Cautions regarding the use of ■ the system : If equipped Do not overly rely on the system, as doing so may lead to an acci- The PKSB (Parking Support dent.
  • Page 284 4-5. Using the driving support systems When your vehicle is towing a WARNING ● trailer or during emergency tow- When to disable the PKSB ■ (Parking Support Brake) sys- Precautions for the suspen- ■ sion In the following situations, disable the PKSB (Parking Support Do not modify the suspension of Brake) as the system may oper-...
  • Page 285 4-5. Using the driving support systems message will be displayed on the Multi-information display: “BRAKE!” multi-information display, to alert Driving assist information indicator: the driver. Not illuminated Depending on the situation, hybrid Buzzer: Short beep system output restriction control will ...
  • Page 286 4-5. Using the driving support systems Hybrid system output Braking force Time  Figure 2 When hybrid system output restriction control operates Hybrid system output Braking force Time Hybrid system output restriction control begins operating (System determines that possibility of collision with detected object is high) ...
  • Page 287 4-5. Using the driving support systems Hybrid system output Braking force Time Hybrid system output restriction control begins operating (System determines that possibility of collision with detected object is high) Brake control begins operating (System determines that possibil- ity of collision with detected object is extremely high) (P.284), or turn the power switch ■...
  • Page 288 4-5. Using the driving support systems Static Objects Front and Rear of the vehicle If the sensors detect a static object, such as a wall, in the travelling direction of the vehicle and the system determines that a collision may occur due to the vehicle suddenly moving forward due to an accidental accelerator pedal operation, the vehicle moving the unin- tended direction due to the wrong shift position, or while parking or traveling at low speeds, the system will operate to lessen the impact...
  • Page 289 4-5. Using the driving support systems When the vehicle moves in the unintended direction due to ■ the wrong shift lever position Types of sensors • There is a static object in the trav- ■ eling direction of the vehicle and P.277 approximately 6 to 13 ft.
  • Page 290 4-5. Using the driving support systems • PKSB (Parking Support Brake) the intuitive parking assist. (P.281) system is disabled. Therefore, even if the intuitive park- • Approximately 2 seconds have ing assist detects an object and pro- elapsed since the vehicle was vides a warning, the PKSB (Parking stopped by brake control.
  • Page 291 4-5. Using the driving support systems the vehicle. WARNING Brake control ● To ensure the system can ■ • PKSB (Parking Support Brake) operate properly system is disabled. • Approximately 2 seconds have P.262 elapsed since the vehicle was stopped by brake control. •...
  • Page 292: Driving Mode Select Switch

    4-5. Using the driving support systems Driving mode select fuel economy through moderate throttle characteristics and by con- switch trolling the operation of the air con- ditioning system (heating/cooling). The driving modes can be Type B  selected to suit driving con- dition.
  • Page 293: Driving Assist Systems

    4-5. Using the driving support systems Driving assist systems ing/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency. To improve air conditioning perfor- To keep driving safety and mance, perform the following opera- performance, the following tions: systems operate automati- ●...
  • Page 294 4-5. Using the driving support systems ■ Enhanced VSC (Enhanced according to various running Vehicle Stability Control) conditions including normal driv- ing, during cornering, on a Provides cooperative control of uphill, when starting off, during the ABS, TRAC, VSC and EPS. acceleration, on a slippery roads Helps to maintain directional due to snow or rain, thus con-...
  • Page 295 TRAC is temporary deactivated. If after the vehicle comes to a stop. the information continues to show, • The brake pedal may pulsate contact your Toyota dealer. slightly after the ABS is activated. ■ Operating conditions of • The brake pedal may move down hill-start assist control slightly after the ABS is activated.
  • Page 296 4-5. Using the driving support systems Active Cornering Assist opera- system off. The EPS system should ■ tion sounds and vibrations return to normal within 10 minutes. When the Active Cornering Assist is Secondary Collision Brake ■ operated, operation sounds and operating conditions vibrations may be generated from The system operates when the SRS...
  • Page 297 Active Cor- different tires are installed on the nering Assist may temporarily vehicle. stop operating to ensure proper Contact your Toyota dealer for fur- operation of the brakes, TRAC ther information when replacing and VSC. tires or wheels.
  • Page 298: 4-6. Driving Tips

    4-6. Driving tips Hybrid vehicle driving system, etc., the hybrid battery 4-6.Driving tips tips (traction battery) power is con- sumed. For economical and ecolog- Accelerator pedal/brake ical driving, pay attention to pedal operation the following points:  Drive your vehicle smoothly. Using Eco drive mode Avoid abrupt acceleration and deceleration.
  • Page 299 4-6. Driving tips When driving in a traffic jam, avoiding overuse of the heater. gently release the brake pedal to allow the vehicle to move for- Checking tire inflation ward slightly while avoiding pressure overuse of the accelerator Make sure to check the tire infla- pedal.
  • Page 300: Winter Driving Tips

    ■ to the prevailing outside tem- tires peratures. Request repairs or replacement of snow tires from Toyota dealers or • Engine oil legitimate tire retailers. This is because the removal and • Engine/power control unit coolant attachment of snow tires affects •...
  • Page 301 4-6. Driving tips excess ice or snow that may gerous because it may cause have accumulated on the the vehicle to move unexpect- exterior lights, outside rear edly, possibly leading to an view mirrors, windows, vehi- accident. cle’s roof, chassis, around the ...
  • Page 302: Utility Vehicle Precautions

    4-6. Driving tips Utility vehicle precau- WARNING tions Utility vehicle precautions ■ Always observe the following pre- cautions to minimize the risk of This vehicle belongs to the death, serious injury or damage to utility vehicle class, which your vehicle: has higher ground clear- In a rollover crash, an unbelted ●...
  • Page 303: Off-Road Driving

    4-6. Driving tips Off-road driving WARNING Off-road driving precautions ■ Your vehicle is not designed to Always observe the following pre- be driven off-road. However, in cautions to minimize the risk of the event that off-road driving death, serious injury or damage to your vehicle: cannot be avoided, please observe the following precau-...
  • Page 304 4-6. Driving tips Always perform a maintenance ● NOTICE inspection after each day of To prevent water damage ■ off-road driving that has taken you through rough terrain, sand, Take all necessary safety mea- mud, or water. For scheduled sures to ensure that water dam- maintenance information, refer age to the hybrid battery (traction to the “Scheduled Maintenance...
  • Page 305: Interior Features

    Interior features 5-1. Using the air conditioning system and defogger Automatic air conditioning system....... Heated steering wheel/seat heaters ...... 5-2. Using the interior lights Interior lights list ..5-3. Using the storage features List of storage features ........Luggage compartment fea- tures ......
  • Page 306 5-1. Using the air conditioning system and defogger Automatic air conditioning system 5-1.Using the air conditioning system and defogger Air outlets are automatically selected and fan speed is auto- matically adjusted according to the set temperature setting. Also, the display and button positions will differ depending on the type of the system.
  • Page 307 5-1. Using the air conditioning system and defogger Vehicles with DUAL mode air conditioning system  Left-hand side temperature control switch Right-hand side temperature control switch “SYNC” (synchronize) switch “A/C” switch S-FLOW mode switch Outside/recirculated air mode switch Airflow mode control switch Fan speed increases switch Fan speed decreases switch Eco air conditioning mode switch...
  • Page 308 5-1. Using the air conditioning system and defogger operate the right-hand side tem- perature control switch to enter individual mode. Individual modes (indicator off): The temperature for the driver’s and front passenger’s side can be adjusted separately. ■ Setting the fan speed Vehicles without DUAL mode ...
  • Page 309 5-1. Using the air conditioning system and defogger To defog the windshield and the ■ When the outside temperature side windows quickly, turn the air exceeds 75°F (24°C) and the air flow and temperature up. conditioning system is on To return to the previous mode, ●...
  • Page 310 5-1. Using the air conditioning system and defogger When the outside temperature ■ falls to nearly 32°F (0°C) The dehumidification function may not operate even when “A/C” switch is pressed. Ventilation and air conditioning ■ odors To let fresh air in, set the air condi- ●...
  • Page 311 Front seat concentrated airflow system mode operates in the following Have repair/replacement per- formed by your Toyota dealer. situations. When a part of the air conditioning  No passengers are detected system, such as the evaporator, is...
  • Page 312: Windshield Wiper De-Icer (If Equipped)

    5-1. Using the air conditioning system and defogger switch the airflow. Windshield wiper de-icer  Indicator illuminated: Airflow (if equipped) to the front seats only  Indicator off: Airflow to all the seats Operation of automatic airflow ■ control In order to maintain a comfortable ●...
  • Page 313 5-1. Using the air conditioning system and defogger Front left-hand side  ■ Adjusting the position of and opening and closing Direct air flow to the left or the air outlets right, up or down Front center  Close the vent Open the vent Rear ...
  • Page 314: Heated Steering Wheel/Seat 3 Heaters

    5-1. Using the air conditioning system and defogger Heated steering WARNING wheel /seat heaters To prevent the windshield ■ defogger from operating improperly : If equipped Do not place anything on the  Heated steering wheel instrument panel which may cover the air outlets.
  • Page 315 5-1. Using the air conditioning system and defogger Operation instructions WARNING To prevent overheating and ■ Heated steering wheel ■ minor burn injuries Turns heated steering wheel Observe the following precautions when using the seat heaters. on/off Do not cover the seat with a When the heated steering wheel is ●...
  • Page 316: 5-2. Using The Interior Lights

    5-2. Using the interior lights Interior lights list 5-2.Using the interior lights Location of the interior lights Rear interior light (P.317) Door trim lights (if equipped) Front interior/personal lights (P.316) Front cup holder light Turns the door position on/off Operating the interior When a door is opened while the lights door position is on, the lights turn...
  • Page 317 5-2. Using the interior lights Rear locked/unlocked, and whether the ■ doors are open/closed. To prevent the 12-volt battery ■ from being discharged If the interior lights remain on when the power switch is turned off, the lights will go off automatically after 20 minutes.
  • Page 318: 5-3. Using The Storage Features

    5-3. Using the storage features List of storage features 5-3.Using the storage features Location of the storage features Bottle holders (P.319) Open tray (if equipped) (P.320) Glove box (P.319) Cup holders (P.319) Console box (P.320) Lighters or spray cans may WARNING ●...
  • Page 319: Glove Box

    5-3. Using the storage features Glove box WARNING Items unsuitable for the cup ■ Pull up the lever to open the holder glove box. Do not place anything other than cups or beverage cans in the cup holders. Glove box light (if equipped) ■...
  • Page 320: Console Box

    5-3. Using the storage features Open tray (if equipped) Bottle holders ■ When storing a bottle, close the ● cap. The bottle may not be stored ● depending on its size or shape. WARNING Items unsuitable for the bottle ■ holders Do not place anything other than a bottle in the bottle holders.
  • Page 321: Luggage Compartment Features 5

    5-3. Using the storage features Luggage compart- Luggage cover (if ment features equipped) Using the luggage cover ■ Cargo hooks Pull out the luggage cover and hook it onto the anchors. The cargo hooks are provided for securing loose items. Release the cover from the left and right anchors and WARNING...
  • Page 322: Auxiliary Boxes

    5-3. Using the storage features Auxiliary boxes Lift the deck mat. WARNING Caution while driving ■ Keep the deck mat closed. In the event of sudden braking, an acci- dent may occur due to an occu- pant being struck by the deck mat or the items stored under the deck mat.
  • Page 323: Other Interior Features

    5-4. Other interior features Other interior features 5-4.Other interior features The USB charging port can be ■ used when The power switch is in ACC or ON. USB charging port Situations in which the USB ■ The USB charging port are used charging port may not operate correctly to supply 3.0 A of electricity at 5...
  • Page 324 5-4. Other interior features NOTICE The power outlet can be used ■ when Do not disassemble or modify ● the USB charging port. The power switch is in ACC or ON. When stopping the hybrid sys- ■ Do not use broken harness and ●...
  • Page 325 5-4. Other interior features Wireless Power Consortium website. : The charging coil in the wireless https://www.wirelesspowercon- charger can be moved within the sortium.com/ charge area up to the position of the charging coil inside a portable The wireless charger cannot be device.
  • Page 326 5-4. Other interior features ■ ■ Recharging function Rapid charging function  If a certain amount of time has  The following portable elapsed since charging com- devices support rapid pleted and the portable device charging. has not been moved, the •...
  • Page 327 5-4. Other interior features work properly and how to deal with the possible causes. Operation indicator light Suspected causes/Handling method Audio system Charging tray screen Wireless charger and multimedia system communication failure Green (Flash-  If the hybrid system is operating, ing repeatedly stop and then restart the hybrid sys- Disappear...
  • Page 328 5-4. Other interior features Operation indicator light Suspected causes/Handling method Audio system Charging tray screen Foreign substance detection: A metallic foreign substance is in the charge area, and so the abnormal heating prevention function of the metallic foreign object operated ...
  • Page 329 5-4. Other interior features Operation indicator light Suspected causes/Handling method Audio system Charging tray screen Safety shutdown resulting when the tem- perature within the wireless charger Orange exceeded the set value (Repeatedly  Stop charging, remove the portable Gray flashes 4 times device from the wireless charger, continuously) wait for the temperature to drop, and...
  • Page 330 5-4. Other interior features warm. This is not a malfunction. station, radio station, large dis- play, airport, or other facility that If a portable device becomes warm generates strong radio waves or while charging and charging stops electrical noise due to the protection function of the ●...
  • Page 331 Contact your Toyota dealer. tors, as well as any other electri- cal medical device, should consult Cleaning the wireless charger ■...
  • Page 332: Sun Visors

    5-4. Other interior features To prevent 12-volt battery dis- WARNING ■ charge Do not allow magnetic objects ● Do not use the wireless charger to come near the wireless char- for a long period of time with the ger. hybrid system stopped. Do not perform charging if the ●...
  • Page 333: Assist Grips

    5-4. Other interior features To prevent 12-volt battery dis- ■ charge (vehicles with vanity lights) If the vanity lights remain on when the power switch is OFF, the lights will go off automatically after 20 min- utes. NOTICE To prevent the 12-volt battery ■...
  • Page 334: Garage Door Opener

    ® HomeLink programming pro- ■ cedure The programming procedures can also be found at the following URL. Website: www.homelink.com/toyota For support, contact customer sup- port at the following. Help Line: 1-800-355-3515 System components ® The HomeLink wireless control...
  • Page 335: Programming The Home-Link

    5-4. Other interior features Conforming to federal safety ■ standards ® Do not use the HomeLink com- patible transceiver with any garage door opener or device that lacks safety stop and reverse fea- tures as required by federal safety standards. This includes any garage door that cannot detect an interfering object.
  • Page 336 5-4. Other interior features you may need a stepladder or ® HomeLink indicator light other sturdy, safe device to changes from slowly flashing reach the “Learn” or “Smart” orange to rapidly flashing green button on the garage door (rolling code) or continuously lit opener motor.
  • Page 337 5-4. Other interior features  Indicator light flashes rapidly: Press and release the The garage door opener “Learn” or “Smart” button. motor or other device is Perform within 30 seconds after performing 2. equipped with a rolling code. To complete programming, firmly press and hold the ®...
  • Page 338 5-4. Other interior features ■ Enabling 2-way communi- “Learn” or “Smart” button on cation with a garage door the garage door opener (only available for compati- motor. Within 5 seconds of ble devices) the establishment of 2-way communication with the When enabled, 2-way communi- garage door opener, both cation allows you to check the...
  • Page 339 5-4. Other interior features trees, feedback signals from the ® Operating HomeLink garage door may not be received. Press the appropriate Home- ® ® To recall the previous door oper- Link button. The HomeLink ation status, press and release indicator light should turn on. ®...
  • Page 340 5-4. Other interior features...
  • Page 341: Cleaning And Protecting The Vehicle Exterior

    Maintenance and care Headlight aim ....6-1. Maintenance and care Light bulbs ....Cleaning and protecting the vehicle exterior ..Cleaning and protecting the vehicle interior ... 6-2. Maintenance Maintenance requirements ........General maintenance.. Emission inspection and maintenance (I/M) pro- grams ......
  • Page 342: Cleaning And Protecting The Vehicle Exterior

    6-1. Maintenance and care Cleaning and protect- gaps around the doors or perimeter 6-1.Maintenance and care of the windows, or spray these ing the vehicle exte- areas continuously. rior ■ When using a car wash If the door handle becomes wet while the electronic key is within the Perform cleaning in a man- effective range, the door may lock...
  • Page 343: Maintenance And Care

    ■ rectly. If this occurs, consult your Toyota dealer. Wash carefully. Do not use ● organic substances or scrub Toyota Safety Sense 3.0 ● with a hard brush. This may damage the surfaces BSM (if equipped) ● of the lights.
  • Page 344 6-1. Maintenance and care Do not spray the lower part of ● NOTICE the windshield continuously. If To prevent damage to the ■ water enters the air conditioning windshield wiper arms system intake located near the lower part of the windshield, the When lifting the wiper arms away air conditioning system may not from the windshield, pull the driver...
  • Page 345: Cleaning And Protecting The Vehicle Interior

    6-1. Maintenance and care Cleaning and protect- WARNING ing the vehicle interior Water in the vehicle ■ Do not splash or spill liquid in ● the vehicle, such as on the floor, Perform cleaning in a man- in the hybrid battery (traction ner appropriate to each battery) air intake vent, and in component and its material.
  • Page 346 6-1. Maintenance and care Water on the floor ■ NOTICE Do not wash the vehicle floor with Cleaning detergents ■ water. Do not use the following types ● Vehicle systems such as the of detergent, as they may dis- audio system may be damaged if color the vehicle interior or water comes into contact with cause streaks or damage to...
  • Page 347 Allow the leather to dry in a shaded and ventilated area. ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Cleaning the synthetic leather areas ...
  • Page 348: 6-2. Maintenance

    Repair and replacement ■ other reproductive harm. Avoid It is recommended that genuine exposure and wash any Toyota parts be used for repairs to affected area immediately. ensure performance of each sys- 12-volt battery posts, terminals ● tem. If non-Toyota parts are used in...
  • Page 349: Do-It-Yourself Maintenance

     4.2-inch display Press of the meter The use of Toyota repair manuals is recommended. control switch to select For details about warranty cover- Press to select “Vehi- age, refer to the separate “Owner’s cle Settings”...
  • Page 350: General Maintenance

    (P.362) problem you notice should be brought to the attention Is there sufficient of your Toyota dealer or Washer fluid washer fluid? qualified service shop for (P.364) advice. Vehicle interior WARNING If the hybrid system is operat- ■...
  • Page 351: Vehicle Exterior

    6-2. Maintenance Items Check points Items Check points • Does the brake • Does the park- pedal move ing brake oper- smoothly? ate normally? • Does the brake • When parked on pedal have Parking brake a slope and the appropriate parking brake is clearance from...
  • Page 352: Emission Inspection And Mainte- Nance (I/M) Programs

    Your vehicle may not • The wiper blades pass the I/M test and may need should not show to be repaired. Contact your any signs of Toyota dealer to service the cracking, split- vehicle. ting, wear, con- Windshield tamination or wipers/rear deformation.
  • Page 353 The error code in the OBD sys- tem will not be cleared unless the vehicle is driven 40 or more times. If your vehicle does not pass the I/M test Contact your Toyota dealer to prepare the vehicle for re-test- ing.
  • Page 354: 6-3. Do-It-Yourself Maintenance

    6-3. Do-it-yourself maintenance Do-it-yourself service 6-3.Do-it-yourself maintenance Items Parts and tools precautions • “Toyota Super Long Life Coolant” or a similar high quality If you perform maintenance ethylene gly- by yourself, be sure to fol- col-based non-sili- low the correct procedure cate, non-amine, as given in these sections.
  • Page 355 6-3. Do-it-yourself maintenance Items Parts and tools Make sure that the “ACCES- ● SORY” or “IGNITION ON” on • Bulb with same the multi-information display number and wattage and the “READY” indicator are both off. Light bulbs rating as original (P.396) •...
  • Page 356: Hood

    6-3. Do-it-yourself maintenance Hold the hood open by insert- Hood ing the support rod into the slot. Opening the hood Pull the hood lock release lever. The hood will pop up slightly. Pull the auxiliary catch lever WARNING to the left and lift the hood. Pre-driving check ■...
  • Page 357: Positioning A Floor Jack

    6-3. Do-it-yourself maintenance ■ Positioning a floor Rear jack When using a floor jack, fol- low the instructions in the manual provided with the jack and perform the opera- tion safely. When raising your vehicle with a floor jack, position the jack correctly.
  • Page 358: Engine Compartment

    6-3. Do-it-yourself maintenance Engine compartment Components Washer fluid tank (P.364) Engine coolant reservoir (P.360) Fuse box (P.393) Engine oil filler cap (P.360) Engine oil level dipstick (P.358) Power control unit coolant reservoir (P.361) Brake fluid reservoir (P.363) Radiator (P.362) Condenser (P.362) Electric cooling fans temperature and turned off, ■...
  • Page 359 6-3. Do-it-yourself maintenance hybrid system, wait about 5 NOTICE minutes for the oil to drain To prevent serious engine ■ back into the bottom of the damage engine. Check the oil level on a regular basis. Holding a rag under the end, pull the dipstick out.
  • Page 360 6-3. Do-it-yourself maintenance mark and refill upper limit mark. Adding engine oil ■ Checking the oil type and preparing the item needed Make sure to check the oil type and prepare the items needed before adding oil.  Engine oil selection P.456 Low level mark ...
  • Page 361: Checking The Coolant

    Reservoir oil and filters in household trash, in sewers or onto the ground. “MAX” line Call your Toyota dealer, service “MIN” line station or auto parts store for information concerning recy- If the level is on or below the “MIN”...
  • Page 362: Checking The Radiator And Condenser

    Coolant selection ■ lubrication, corrosion protection Only use “Toyota Super Long Life and cooling. Be sure to read the Coolant” or a similar high quality antifreeze or coolant label. ethylene glycol based non-silicate,...
  • Page 363 6-3. Do-it-yourself maintenance Disconnect the claws and WARNING remove the service cover. When the hybrid system is ■ Do not touch the radiator or con- denser as they may be hot and cause serious injuries, such as burns. Checking and adding the brake fluid Checking fluid level ■...
  • Page 364 6-3. Do-it-yourself maintenance WARNING NOTICE When filling the reservoir Do not use any fluid other ■ ■ than washer fluid Take care as brake fluid can harm your hands and eyes and damage Do not use soapy water or engine painted surfaces.
  • Page 365: 12-Volt Battery

    6-3. Do-it-yourself maintenance 12-volt battery ■ Before recharging When recharging, the 12-volt bat- tery produces hydrogen gas which Location is flammable and explosive. There- fore, observe the following precau- The 12-volt battery is located in tions before recharging: the right-hand side of luggage ●...
  • Page 366 12-volt battery in a garage or closed room where there is insuf- For replacement of the 12-volt ficient ventilation. battery, contact your Toyota dealer. How to recharge the 12-volt ■ battery Only perform a slow charge (5 A NOTICE or less).
  • Page 367: Tires

    6-3. Do-it-yourself maintenance Tires Exterior Make sure that the 12-volt bat- Replace or rotate tires in tery terminals are not corroded accordance with mainte- and that there are no loose con- nance schedules and tread- nections, cracks, or loose wear. clamps.
  • Page 368 If you are not sure, consult with your be adequate for driving in most win- Toyota dealer. ter conditions as well as for use ■ Tire life year-round. All season tires, how-...
  • Page 369: Tire Rotation

    Do not use tires if you do not To equalize tire wear and extend know how they were used previ- tire life, Toyota recommends that ously. tire rotation is carried out at the same interval as tire inspection.
  • Page 370 6-3. Do-it-yourself maintenance Tire pressure warning system Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. ■ How to change the unit The tire pressure warning sys- 4.2-inch display ...
  • Page 371 In the following cases, the tire pressure warning system may not Select of the multi-infor- operate properly. mation display and then • If non-genuine Toyota wheels are used. press • A tire has been replaced with a tire that is not an OE (Original Press to select Equipment) tire.
  • Page 372 If a liquid seal- warning computer and the tire ant is used, contact your Toyota pressure warning system must dealer or other qualified service shop as soon as possible. Make be initialized.
  • Page 373 6-3. Do-it-yourself maintenance  When changing the tire. “Vehicle Settings” and then  After registering the ID codes. press and hold (P.375) 7-inch display meter:  When changing between two Press to select “Vehi- registered wheel sets. cle Settings” and then press and When the tire pressure warning hold system is initialized, the current...
  • Page 374 6-3. Do-it-yourself maintenance display. depending on the driving condi- tions and driving environment, ini- tialization may take some time to complete. ■ The initialization operation ● If you have accidentally turned the power switch to OFF during initial- ization, it is not necessary to restart the initialization again as initialization will restart automati- cally when the power switch has...
  • Page 375: Registering Id Codes

    Press to select “Vehi- If the inflation pressure of each ● tire is still not displayed, have the cle Settings” and then press and vehicle inspected by your Toyota hold dealer. 4.2-inch display meter: WARNING Press to select When initializing the tire pres- ■...
  • Page 376 6-3. Do-it-yourself maintenance sure of each tire on the multi-infor- Press to select “Tyre mation display. Set Switching” and then press Drive straight (with occa- sional left and right turns) at approximately 25 mph (40 4.2-inch display meter: km/h) or more for approxi- Press to select mately 10 to 30 minutes.
  • Page 377 ID code registration start procedure again and then turn the If the ID codes cannot be registered power switch off before driving. even when performing the above procedure, contact your Toyota ■ If ID codes are not registered dealer. properly...
  • Page 378 6-3. Do-it-yourself maintenance change of wheel set only if a Press to select second wheel set has been “TPWS setting” and then press registered. If no second wheel set has been registered, no change will be made when 4.2-inch display meter: selecting this function in the Press to select...
  • Page 379: Replacing The Tire

    When replacing the tires yourself, prepare the neces- sary tools and a jack. If necessary tire replace- ment seems difficult to per- form, contact your Toyota dealer. After 2 minutes, registration of a second wheel set is being per- Before jacking up the formed.
  • Page 380 6-3. Do-it-yourself maintenance Removing a tire WARNING Put the jack properly in its jack ● Chock the tires. point. Do not put any part of your body ● under the vehicle while it is sup- ported by the jack. Wheel chock Tire positions Do not start the hybrid system...
  • Page 381 • If there are any cracks or defor- scratching the wheel surface. mations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer.
  • Page 382 6-3. Do-it-yourself maintenance the disc wheel WARNING Replacing a flat tire for vehi- ■ cles with power back door opener and closer (if equipped) In cases such as when replacing tires, make sure to turn off the back door opener main switch (P.121).
  • Page 383: Tire Inflation Pressure

    ● ment procedure mations in the bolt screws, nut threads or bolt holes of the wheel, have the vehicle inspected by your Toyota dealer. When installing the wheel nuts, ● be sure to install them with the tapered ends facing inward.
  • Page 384 Reduced tire life due to wear ● Reduced safety Air leaking from between tire ● ● and wheel Damage to the drive train ● Wheel deformation and/or tire If a tire needs frequent inflating, ● damage have it checked by your Toyota dealer.
  • Page 385: Wheels

    Replacement wheels are avail- able at your Toyota dealer. : Conventionally referred to as off- set. Toyota does not recommend using the following: ...
  • Page 386: Aluminum Wheel Precautions

    ● leaking wheel which is designed tions for a tubeless tire. Doing so may result in an acci-  Use only Toyota wheel nuts dent, causing death or serious injury. and wheel nut wrenches designed for use with your When installing the wheel ■...
  • Page 387: Air Conditioning Filter

    6-3. Do-it-yourself maintenance Air conditioning filter claws ( ), and remove the filter cover. The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removing the air condi- tioning filter Turn the power switch off. Remove the filter case. Open the glove box.
  • Page 388: Cleaning The Hybrid Battery (Trac- Tion Battery) Air Intake Vent

    Maintenance Guide” or “Owner’s Manual Supplement”. Cleaning the air intake vent ■ Improper handling of the air intake vent cover and filter may result in damage to them. If you have any concerns about cleaning the filter, contact your Toyota dealer.
  • Page 389: Cleaning Procedure

    6-3. Do-it-yourself maintenance If dust has accumulated on the air NOTICE intake vent cover, remove the dust with a vacuum cleaner, etc. If “Maintenance required for ■ Traction Battery cooling parts See owner’s manual” is dis- played on the multi-informa- tion display Clean the air intake vent immedi- ately.
  • Page 390 6-3. Do-it-yourself maintenance Toyota dealer. Before cleaning the air intake ● vent, make sure to turn the power switch off to stop the hybrid system. Do not put a hand or leg in the ● air intake vent. If it is caught in a...
  • Page 391: Electronic Key Battery

     Small flathead screwdriver  Lithium battery CR2450 Use a CR2450 lithium battery ■ Batteries can be purchased at ● your Toyota dealer, local electrical appliance shops or camera stores. Replace only with the same or ● equivalent type recommended by the manufacturer.
  • Page 392: Replacing The Battery

    Insert a new battery with the “+” ter- batteries from children. If the cover cannot be firmly ● closed, stop using the electronic key and stow the key in the place where children cannot reach, and then contact your Toyota dealer.
  • Page 393: Checking And Replacing Fuses

    6-3. Do-it-yourself maintenance Checking and replac- WARNING ing fuses If you accidentally swallow a ● battery or put a battery into a part of your body, get emer- If any of the electrical com- gency medical attention imme- ponents do not operate, a diately.
  • Page 394 6-3. Do-it-yourself maintenance Luggage compartment  Normal fuse Opening the deck mat and 12-volt Blown fuse battery cover (P.365). Type B  Remove the fuse with the Normal fuse pullout tool. Only type A fuse can be Blown fuse removed using the pullout Type C ...
  • Page 395: Headlight Aim

    Do not modify the fuses or fuse ● boxes.  Have someone sit in the driver’s seat. NOTICE  Bounce the vehicle several Before replacing fuses ■ times. Have the cause of electrical over- load determined and repaired by your Toyota dealer as soon as possible.
  • Page 396: Light Bulbs

    1. bulb to be replaced. (P.460) If the headlight cannot be adjusted using this procedure, take the vehi- Disabling the power back cle to your Toyota dealer to adjust the headlight aim. door system (if equipped) P.129 Bulb locations ■...
  • Page 397 The lights other than the following ■ Rear lights each consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. ● Front side marker lights (bulb type) ●...
  • Page 398 6-3. Do-it-yourself maintenance ■ Remove the light bulb. Front turn signal lights (bulb type) Turn the bulb base counter- clockwise. When installing, reverse the steps listed. ■ Parking lights (bulb type) Remove the light bulb. Turn the bulb base counter- clockwise.
  • Page 399 6-3. Do-it-yourself maintenance Turn the bulb base counter- Install the 2 screws. clockwise. ■ Back-up lights Remove the light bulb. Open the back door and remove the cover. Using a flathead screwdriver, remove the cover. To prevent damage to the vehicle, wrap the tip of the flathead screw- driver with tape, etc.
  • Page 400 6-3. Do-it-yourself maintenance ■ Remove the light bulb. License plate lights Remove the lens. When installing the light bulb, install it by conducting steps 3 and 2 with the directions reversed. Install the cover. Align the tabs of the cover with the grooves and install the cover.
  • Page 401 6-3. Do-it-yourself maintenance Remove the light bulb. right or left hooks. Push the lens into place. After installation, confirm that the lens is properly installed by gently pulling it. WARNING To prevent injury ■ Before performing any light bulb replacement procedure, be sure to turn the power switch off.
  • Page 402 6-3. Do-it-yourself maintenance...
  • Page 403: When Trouble Arises

    When trouble arises 7-1. Essential information Emergency flashers ..If your vehicle has to be stopped in an emergency ........If the vehicle is submerged or water on the road is ris- ing ......7-2. Steps to take in an emer- gency If your vehicle needs to be towed......
  • Page 404: Essential Information Emergency Flashers

    7-1. Essential information Emergency flashers conditions of the collision.) 7-1.Essential information The emergency flashers are used to warn other drivers when the vehicle has to be stopped on the road due to a breakdown, etc. Operating instructions Press the switch. All the turn signal lights will flash.
  • Page 405: If Your Vehicle Has To Be Stopped In An Emergency

    7-1. Essential information briefly 3 times or more in suc- If your vehicle has to cession. be stopped in an emer- gency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following proce- dure: Stop the vehicle in a safe...
  • Page 406: If The Vehicle Is Submerged Or Water On The Road Is Rising

    Tempered glass is used in the win- power window switch and dows on this vehicle. ensure an escape route. : Contact your Toyota dealer or aftermarket accessory manufac-  If the window can be opened, turer for further information about exit the vehicle through the an emergency hammer.
  • Page 407: 7-2. Steps To Take In An Emergency

    Situations when it is nec- essary to contact dealers before towing The following may indicate a problem with your transmission. Contact your Toyota dealer or commercial towing service before towing. Use a towing dolly under the  The hybrid system warning front wheels.
  • Page 408: Using A Flat-Bed Truck

    7-2. Steps to take in an emergency Towing with a sling-type truck WARNING ■ Do not tow with a sling-type truck When towing the vehicle ■ to prevent body damage. Be sure to transport the vehicle with all four wheels raised off the ground.
  • Page 409 7-2. Steps to take in an emergency be in good condition. Insert the towing eyelet into the hole and tighten partially by hand. Emergency towing proce- dure (vehicles with a tow- TypeA  ing eyelet) To have your vehicle towed by another vehicle, the towing eye- let must be installed to your vehicle.
  • Page 410 Wheel nut wrench ■ Wheel nut wrench can be pur- chased at your Toyota dealer. WARNING Observe the following precau- tions. Failure to do so may result in death or serious injury.
  • Page 411: If You Think Something Is Wrong

    Con- touches the floor tact your Toyota dealer as soon as possible. Visible symptoms  Fluid leaks under the vehicle. (Water dripping from the air conditioning after use is nor- mal.)
  • Page 412: If A Warning Light Turns On Or A Warning Buzzer Sounds

     The brake fluid level is low; or (U.S.A.)  The brake system is malfunctioning  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. Continuing to drive the vehi- cle may be dangerous. (Red) (Canada) ■...
  • Page 413 Charging system warning light (warning buzzer) Warning light Details/Actions Indicates a malfunction in the vehicle’s charging system  Immediately stop the vehicle in a safe place and con- tact your Toyota dealer. ■ Low engine oil pressure warning light (warning buzzer) Warning light...
  • Page 414 SRS warning light Warning light Details/Actions Indicates a malfunction in:  The SRS airbag system; or  The seat belt pretensioner system  Have the vehicle inspected by your Toyota dealer immediately. ■ ABS warning light Warning light Details/Actions Indicates a malfunction in: ...
  • Page 415 Electric power steering system warning light (warning buzzer) Warning light Details/Actions Indicates a malfunction in the EPS (Electric Power Steer- ing) system  Have the vehicle inspected by your Toyota dealer (Red/yellow) immediately. ■ Low fuel level warning light Warning light Details/Actions Indicates that remaining fuel is approximately 1.6 gal.
  • Page 416 When the light comes on after blinking for approximately 1 minute: Malfunction in the tire pressure warning system  Have the system checked by your Toyota dealer. When the light comes on: Low tire inflation pressure such as  Natural causes ...
  • Page 417 Warning light Details/Actions Indicates a malfunction in the intuitive parking assist func- tion  Have the vehicle inspected by your Toyota dealer immediately. Indicates that the system is temporarily unavailable, possi- (if equipped) bly due to a sensor being dirty or covered with ice, etc.
  • Page 418 (P.422) : If equipped ■ Slip indicator Warning light Details/Actions Indicates a malfunction in:  The VSC system;  The TRAC system; or  The hill-start assist control system  Have the vehicle inspected by your Toyota dealer immediately.
  • Page 419 (Flashes) (Canada) ■ Brake hold operated indicator (warning buzzer) Warning light Details/Actions Indicates a malfunction in the brake hold system  Have the vehicle inspected by your Toyota dealer immediately. (Flashes) ● Side impact sensors (front) ■ Warning buzzer ●...
  • Page 420 There may be a malfunction in the ota dealer. tire pressure warning system. Have The vehicle will become the vehicle inspected by your Toyota extremely unstable during brak- dealer immediately. ing, and the ABS system may fail, If the tire pressure warning light ...
  • Page 421 7-2. Steps to take in an emergency Please note that the TPMS (tire WARNING pressure warning system) is not a Avoid abrupt maneuvering and ● substitute for proper tire mainte- braking. nance, and it is the driver’s If the vehicle tires deteriorate, responsibility to maintain correct you could lose control of the tire pressure, even if under-infla-...
  • Page 422: If A Warning Message Is Displayed

    If a warning message is dis- played again after the appropriate actions have been performed, contact your Toyota dealer. Additionally, if a warning light comes on or flashes at the same time that a warn- ing message is displayed,...
  • Page 423 If “Traction battery needs to be The following systems may be mal- protected. Refrain from the use functioning. Have the vehicle of N position.” is displayed inspected by your Toyota dealer immediately. This message may be displayed ● when the shift lever is in N.
  • Page 424 • Check the voltage of the 12-volt equipped) battery ● RCTA (Rear Cross Traffic • Check the sensors that the Toyota Alert) (if equipped) Safety System 3.0 uses for foreign matter covering them. Remove ● Safe Exit Assist (if equipped) them if any.
  • Page 425 7-2. Steps to take in an emergency ● LDA (Lane Departure Alert) • If the front camera is cold, such after the vehicle is parked in an ● AHB (Automatic High Beam) extremely cold environment, use ● Dynamic radar cruise control the air conditioning system to increase the temperature around ●...
  • Page 426 ● Dynamic radar cruise control The engine or an engine component ● Cruise control is malfunctioning. Have the vehicle inspected by your Toyota dealer A message is displayed when the immediately. driving assist switch is pushed ■ repeatedly. If “Oil Maintenance Required Soon”...
  • Page 427 7-2. Steps to take in an emergency and oil filter by your Toyota dealer. even if the vents are cleaned, After changing the engine oil, make have the vehicle inspected by sure to reset the message. your Toyota dealer. (P.360)
  • Page 428: If You Have A Flat Tire

    • To avoid sealant leakage, tire repaired or replaced by move the vehicle until the your Toyota dealer. Repairs area of the puncture, if conducted using the emer- known, is positioned at the gency tire puncture repair top of the tire.
  • Page 429 ● When the wheel is damaged tire puncture repair kit. Contact your ● When 2 or more tires have been Toyota dealer. punctured ● When the tire is damaged due to ● When 2 or more sharp objects...
  • Page 430 7-2. Steps to take in an emergency When lowering the vehicle, WARNING ● make sure that there is no-one Using the tire jack ■ near the vehicle. If there are people nearby, warn them Observe the following precau- vocally before lowering. tions.
  • Page 431 Do not use repair kit on other be replaced with a new bottle vehicles, which could lead to an before the expiry date. Contact accident causing death or seri- your Toyota dealer for replace- ous injury. ment. Do not use repair kit for tires ●...
  • Page 432 7-2. Steps to take in an emergency ble. Taking out the emer- gency tire puncture repair Lift the deck mat. Take out the emergency tire puncture repair kit. (P.429) Emergency repair method Connect the hose to the bot- tle. Take out the repair kit from Make sure to insert the hose until the plastic bag.
  • Page 433 7-2. Steps to take in an emergency Remove the valve cap from Remove the power plug from the valve of the punctured the compressor. tire. Make sure that the compressor- switch is off. Extend the hose. Remove Connect the power plug to the air release cap from the the power outlet socket.
  • Page 434 7-2. Steps to take in an emergency 14Inflate the tire until the speci- on the label on the driver’s side pil- lar as shown. (P.460) fied air pressure is reached. 12Start the hybrid system. (P.176) 13To inject the sealant and inflate the tire, turn the com- pressor switch on.
  • Page 435 The punc- in the luggage compartment ture cannot be repaired. Con- while it is connected to the tact your Toyota dealer. compressor. If the tire inflation pressure is 19To spread the liquid sealant 130 kPa (1.3 kgf/cm2 or bar,...
  • Page 436 50 ■ After a tire is repaired with the emergency tire puncture repair mph (80 km/h) to the nearest Toyota dealer that is less ● The tire pressure warning valve than 62 miles (100 km) away and transmitter should be for tire repair or replacement.
  • Page 437 7-2. Steps to take in an emergency Keep back from the tire while it WARNING ● is being repaired, as there is a Do not drive the vehicle with ■ chance of it bursting while the a flat tire repair operation is being per- formed.
  • Page 438 Do not remove the sharp object operate properly. If a liquid seal- from the tire. Removing the ant is used, contact your Toyota object may widen the opening dealer or other qualified service and disenable emergency repair shop as soon as possible.
  • Page 439: If The Hybrid System Will Not Start

     There may be a malfunction nected. (P.365) in the immobilizer system. (P.78) Contact your Toyota dealer if the problem cannot be repaired, or if  The hybrid system may be repair procedures are unknown. malfunctioning due to an elec-...
  • Page 440: If You Lose Your Keys

    Set the parking brake. (P.188) New genuine keys can be Check that the shift lever is in made by your Toyota dealer using another mechanical key and the key number Turn the power switch to stamped on your key num- ber plate.
  • Page 441: If The Fuel Filler Door Cannot Be Opened

    If the fuel filler door opener ● manually except in an emer- switch cannot be operated, gency. Fuel may overflow. contact your Toyota dealer Using the lever to open the fuel ● to service the vehicle. In filler door may not allow for an...
  • Page 442: If The Electronic Key Does Not Operate Properly

    ■ malfunction or other roof (turn and hold) key-related problems : If equipped Take your vehicle with all the elec- tronic keys provided with your : This setting must be customized vehicle to your Toyota dealer. at your Toyota dealer.
  • Page 443: Starting The Hybrid System

    Operate the power window or tem still cannot be started, con- moon roof after checking to make sure that there is no possibility of tact your Toyota dealer. any passenger having any of their body parts caught in the window Stopping the hybrid system or moon roof.
  • Page 444: If The 12-Volt Battery Is Discharged

    7-2. Steps to take in an emergency If the 12-volt battery is Restarting the hybrid sys- discharged If you have a set of jumper (or The following procedures booster) cables and a second may be used to start the vehicle with a 12-volt battery, hybrid system if the 12-volt you can jump start your vehicle battery is discharged.
  • Page 445 7-2. Steps to take in an emergency Open the exclusive jump starting terminal cover. Connect a positive jumper cable clamp to on your vehicle and connect the clamp on the other end of the positive cable to the second vehicle. Then, connect a negative cable clamp to on the second vehicle and connect the clamp at the other end of the negative cable to Use jumper cables that can reach the specified terminals and connecting...
  • Page 446 12-volt battery have the vehicle inspected at ● In some cases, it may not be pos- your Toyota dealer as soon as sible to unlock the doors using the possible. smart key system when the 12-volt battery is discharged. Use the wireless remote control or the ■...
  • Page 447 European regulations. Use a battery that the case size is Hole section of the vehicle ● same as the previous one (LN1), For details, consult your Toyota ● 20 hour rate capacity (20HR) is dealer. equivalent (45Ah) or greater, and performance rating (CCA) is equivalent (286A) or greater.
  • Page 448 The exclusive jump starting termi- Have the 12-volt battery nal is to be used when charging inspected at your Toyota dealer the 12-volt battery from another as soon as possible. vehicle in an emergency. It cannot If the 12-volt battery is deteriorat-...
  • Page 449: If Your Vehicle Overheats

    Owner’s Manual” or “Hybrid system overheated Output Cooling fans power reduced” is shown on If a large amount of coolant leaks, the multi-information dis- immediately contact your Toyota play. dealer.  Steam comes out from The coolant level is satisfac- under the hood.
  • Page 450 If water was added in an emer- After the hybrid system has gency, have the vehicle inspected at your Toyota dealer as soon as cooled down, inspect the possible. hoses and radiator core (radi- ator) for any leaks.
  • Page 451 7-2. Steps to take in an emergency gency, have the vehicle inspected After the hybrid system has ● at your Toyota dealer as soon as been turned off, check that the possible. “READY” indicator is off. When the hybrid system is operating,...
  • Page 452: If The Vehicle Becomes Stuck

    7-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following pro- cedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: WARNING When attempting to free a ■ Recovering procedure stuck vehicle If you choose to push the vehicle Stop the hybrid system.
  • Page 453: Vehicle Specifications

    Vehicle specifications 8-1. Specifications Maintenance data (fuel, oil level, etc.)....Fuel information ..Tire information ... 8-2. Customization Customizable features ........8-3. Initialization Items to initialize ..
  • Page 454: Maintenance Data (Fuel, Oil Level, Etc.)

    8-1. Specifications Maintenance data (fuel, oil level, etc.) 8-1.Specifications Dimensions and weight 175.6 in. (4460 mm) Overall length 176.8 in. (4490 mm) Overall width 71.9 in. (1825 mm) 64.8 in. (1645 mm) Overall height Wheelbase 103.9 in. (2640 mm) 61.7 in. (1566 mm) Front 61.3 in.
  • Page 455 8-1. Specifications for your vehicle. This is the pri- mary identification number for your Toyota. It is used in regis- tering the ownership of your vehicle. This number is stamped on the top left of the instrument panel. ■ Engine number The engine number is stamped on the engine block as shown.
  • Page 456 Engine oil selection Lubrication system “Toyota Genuine Motor Oil” is ■ Oil capacity (Drain and refill used in your Toyota vehicle. Use [Reference Toyota approved “Toyota Genu- ine Motor Oil” or equivalent to 4.4 qt. (4.2 L, 3.7 Imp. With filter satisfy the following grade and qt.)
  • Page 457 Power con- ence) 1.8 qt. (1.7 L, 1.5 Imp. qt.) trol unit Use either of the following:  “Toyota Super Long Life Coolant”  Similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and Coolant type non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
  • Page 458 Fluid capacity Fluid type Toyota Genuine e-Transaxle Fluid TE : The fluid capacity is a reference quantity. If replacement is necessary, contact your Toyota dealer. NOTICE Hybrid transmission fluid type ■ Using transmission fluid other than the above type may cause abnormal noise or vibration, or ultimately damage the transmission of your vehicle.
  • Page 459 8-1. Specifications NOTICE Hybrid transmission fluid type ■ Using differential gear oil other than the specified oil may cause abnormal noise or vibration, or damage the differential gear of your vehicle. Brakes 4.7 in. (120 mm) Min. Pedal clearance Pedal free play 0.04 ...
  • Page 460 8-1. Specifications Tires and wheels Type A  Tire size 215/65R17 99H  Front Tire inflation pressure 33 psi (230 kPa, 2.3 kgf/cm or bar) (Recommended cold tire  Rear inflation pressure) 33 psi (230 kPa, 2.3 kgf/cm or bar) 17 ...
  • Page 461 8-1. Specifications B: Wedge base bulbs (amber)
  • Page 462: Fuel Information

    (Methylcyclopentadienyl Manga- use of Top Tier Detergent Gaso- nese Tricarbonyl). line. For more information on Top Toyota does not recommend the use Tier Detergent Gasoline and a list of gasoline that contains MMT. If of marketers, please go to the offi- fuel containing MMT is used, your cial website www.toptiergas.com.
  • Page 463 The malfunction indicator lamp on Take care not to spill gasohol. It the instrument cluster may come on. can damage your vehicle’s paint. If this happens, contact your Toyota dealer for service. If your engine knocks ■ Consult your Toyota dealer.
  • Page 464: Tire Information

    8-1. Specifications Tire information Typical tire symbols Tire size (P.465) DOT and Tire Identification Number (TIN) (P.465) Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (P.367) Tire ply composition and materials Plies are layers of rubber-coated parallel cords.
  • Page 465 8-1. Specifications DOT symbol Typical DOT and Tire Identification Number Tire Identification Number (TIN) (TIN) Tire manufacturer’s identifi-  Type A cation mark Manufacturer’s code Manufacturing week Manufacturing year : The DOT symbol certifies that the tire conforms to applicable Fed- eral Motor Vehicle Safety Stan- dards.
  • Page 466 Toyota vehicles with informa- Tire height tion on uniform tire quality grad- Wheel diameter ing. Your Toyota dealer will help answer Tire section names any questions you may have as you read this information. ■ DOT quality grades...
  • Page 467 8-1. Specifications would wear one and a half (1 - 1/2) (the highest), B, and C, repre- times as well on the government senting the tire’s resistance to course as a tire graded 100. the generation of heat and its The relative performance of tires ability to dissipate heat when depends upon the actual conditions...
  • Page 468 8-1. Specifications Tire related term Meaning Recommended inflation pres- Cold tire inflation pressure recommended sure by a manufacturer The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power Accessory weight seats, radio and heater, to the extent that these items are available as fac-...
  • Page 469 8-1. Specifications Tire related term Meaning Rim diameter (Wheel diame- Nominal diameter of the bead seat ter) Rim size designation Rim diameter and width The industry manufacturer’s designation Rim type designation for a rim by style or code Rim width Nominal distance between rim flanges The rated cargo and luggage load plus 150 Vehicle capacity weight (Total...
  • Page 470 8-1. Specifications Tire related term Meaning The parting of cords from adjacent rubber Cord separation compounds Any parting within the tread, sidewall, or Cracking innerliner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that...
  • Page 471 8-1. Specifications Tire related term Meaning Maximum permissible inflation The maximum cold inflation pressure to pressure which a tire may be inflated The rim on which a tire is fitted for physical Measuring rim dimension requirements Any parting at any junction of tread, side- Open splice wall, or innerliner that extends to cord material...
  • Page 472 8-1. Specifications Tire related term Meaning The parting of the rubber compound from Sidewall separation the cord material in the sidewall A tire that attains a traction index equal to or greater than 110, compared to the ASTM E-1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Snow tire...
  • Page 473 8-1. Specifications Designated seating Occupant distribution in Vehicle normal load, capacity, Number of a normally loaded vehi- Number of occupants occupants 2 in front, 1 in second 11 through 15 seat, 1 in third seat, 1 in fourth seat 2 in front, 2 in second 16 through 20 seat, 2 in third seat, 1 in fourth seat...
  • Page 474: 8-2. Customization

    Press or press and hold the audio system screen, or at your Toyota dealer. The available settings will differ Some of the customizable depending on if is pressed or features are changed in pressed and held.
  • Page 475 8-2. Customization tions being customized. Contact your Toyota dealer for further details. Settings that can be changed using the audio system screen Settings that can be changed using the meter control switches Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, —...
  • Page 476 8-2. Customization Default setting Customized setting Function — O — AWD Control After start After reset — O — Drive information type Average vehicle Drive information items speed Distance — O — (First item) Elapsed time Average vehicle Drive information items speed Elapsed time —...
  • Page 477 8-2. Customization Function Default setting Customized setting Shift position linked door — unlocking function Driver's door linked door — unlocking function : This setting changes in accordance with My Settings. ■ Smart key system and wireless remote control (P.117, 131) Function Default setting Customized setting Operating signal (Buzz-...
  • Page 478 8-2. Customization ■ Wireless remote control (P.115, 117, 121) Function Default setting Customized setting Wireless remote control — — Driver’s door unlocked in one step, all All doors unlocked Unlocking operation — doors in one step unlocked in two step Theft deterrent panic —...
  • Page 479 8-2. Customization ■ Power windows and moon roof (P.145, 148) Function Default setting Customized setting Mechanical key linked — — operation Wireless remote control On (open only) — — linked operation Wireless remote control linked operation signal — — (buzzer) : If equipped ■...
  • Page 480 8-2. Customization ■ PCS (Pre-Collision System) (P.215) Function Customized setting PCS (Pre-Collision Sys- On, Off — — tem) Later, Default, Earlier — — Warning timing : The system is automatically enabled each time the power switch is turned to ON. : This setting changes in accordance with My Settings.
  • Page 481 8-2. Customization Function Customized setting Deceleration Assist On, Off — — (DA) Obstacle Anticipation On, Off — — Assist (OAA) : This setting changes in accordance with My Settings ■ RSA (Road Sign Assist) (P.242) Function Customized setting RSA (Road Sign On, Off —...
  • Page 482 8-2. Customization : If equipped ■ Intuitive parking assist (P.277) Function Customized setting Intuitive parking assist On, Off — — Buzzer volume Level1, Level2, Level3 — — : If equipped ■ RCTA (Rear Cross Traffic Alert) function (P.267) Function Customized setting RCTA (Rear crossing On, Off —...
  • Page 483 8-2. Customization ■ Automatic air conditioning system (P.306) Function Default setting Customized setting Switching between out- side air and recirculated air mode linked to auto- — matic mode switch oper- ation A/C auto switch opera- — tion : This setting changes in accordance with My Settings. ■...
  • Page 484: 8-3. Initialization

    8-3. Initialization Items to initialize 8-3.Initialization The following items must be initialized for normal system operation after such cases as the 12-volt battery being recon- nected, or maintenance being performed on the vehicle: List of items to initialize Item When to initialize Reference •...
  • Page 485: For Owners

    For owners 9-1. For owners Reporting safety defects for U.S. owners....Reporting safety defects for Canadian owners ..Seat belt instructions for Canadian owners (in French)...... SRS airbag instructions for Canadian owners (in French)...... Headlight aim instructions for Canadian owners (in French)......
  • Page 486: Reporting Safety Defects For U.s. Owners

    However, NHTSA can- not become involved in individual problems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153);...
  • Page 487: Seat Belt Instructions For Canadian Owners (In French)

    9-1. For owners sécurité. Seat belt instructions for Canadian owners Entretien et soin (in French) Traitement des ceintures de ■ The following is a French sécurité explanation of seat belt Nettoyez avec un chiffon ou une instructions extracted from éponge humidifiés avec de l'eau the seat belt section in this savonneuse tiède.
  • Page 488: Srs Airbag Instructions For Canadian Owners (In French)

    9-1. For owners SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instruc- tions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
  • Page 489 9-1. For owners • Contribuent à réduire l’impact au niveau du thorax des occupants des sièges arrière latéraux Coussins gonflables latéraux et rideaux SRS  Coussins gonflables rideaux SRS • Contribuent à réduire l’impact au niveau de la tête des occupants des sièges avant et des sièges arrière latéraux •...
  • Page 490 9-1. For owners • Si votre volant est réglable, AVERTISSEMENT inclinez-le vers le bas. Cela a Le coussin gonflable conduc- ● pour effet d'orienter le coussin teur SRS se déploie avec une gonflable en direction de votre force considérable, pouvant poitrine plutôt que de votre tête occasionner des blessures et de votre cou.
  • Page 491 Un nourrisson ou un enfant trop petit pour utiliser une ceinture de sécurité doit être correctement attaché au moyen d'un siège de sécurité enfant. Toyota recommande vivement d'installer tous les nourrissons et enfants sur les sièges arrière Ne laissez personne s'age- ●...
  • Page 492 9-1. For owners Évitez de faire subir des chocs AVERTISSEMENT ● ou des pressions excessives Ne fixez rien aux portes, à la ● aux parties renfermant les com- vitre du pare-brise, aux vitres posants de coussins gonflables latérales, aux montants avant et SRS ou aux portes avant.
  • Page 493 9-1. For owners Réparation ou modification des AVERTISSEMENT ● pièces suivantes ou de leurs Modification et mise au rebut ■ alentours des composants du système • Aile avant de coussins gonflables SRS Ne mettez pas votre véhicule au • Pare-chocs avant rebut et ne procédez à...
  • Page 494: Headlight Aim Instructions For Canadian Owners (In French)

    Si vous n'arrivez pas à régler le phare en procédant de la sorte, réglage des phares confiez le véhicule à votre conces- sionnaire Toyota pour qu'il règle le  Vérifiez que le réservoir de faisceau des phares. carburant du véhicule est...
  • Page 495: Index

    Index What to do if... (Trouble- shooting) ....Alphabetical Index..
  • Page 496: What To Do If

     If you lose your electronic keys, the risk of vehicle theft  Did you press the power increases significantly. Con- switch while firmly depress- tact your Toyota dealer imme- ing the brake pedal? diately. (P.440) (P.176)  Is the shift lever in P? The doors cannot be (P.176)
  • Page 497 What to do if... (Troubleshooting) Is the parking brake released? The shift lever cannot be (P.188) shifted from P even if you depress the brake pedal Depending on the situation, other types of warning buzzer  Is the power switch in ON? may also sound.
  • Page 498 What to do if... (Troubleshooting) When a problem has occurred If you have a flat tire  Stop the vehicle in a safe place and repair the flat tire temporarily with the emer- gency tire puncture repair kit. (P.428) The vehicle becomes stuck ...
  • Page 499: Alphabetical Index

    Alphabetical Index Alphabetical Index Side airbag precautions..34 Side and curtain shield airbags operating conditions .....33 Air conditioning filter.....387 Side and curtain shield airbags Automatic air conditioning sys- precautions......34 tem ........306 SRS airbags ......31 Front seat concentrated airflow SRS warning light ....414 mode (S-FLOW)....
  • Page 500 Alphabetical Index Preparing and checking before Child restraint system .....47 winter........300 Heated steering wheel and seat Battery (traction battery) ..73 heater precautions....314 Blind Spot Monitor (BSM)..261 How your child should wear the Bottle holders ......319 seat belt........28 Brake Moon roof precautions..149 Brake hold ......191 Power window lock switch ..147 Fluid ......363, 459...
  • Page 501 Alphabetical Index Windshield......308 Driving information display ...93, Differential Rear differential oil ....458 Driving range ....94, 101 Dimensions ......454 Driving support system informa- Dinghy towing ......175 tion display......97, 104 Display DSC (Drive-Start Control) Cruise control .......255 Sudden start restraint control161 Dynamic radar cruise control247 Dynamic radar cruise control244 Energy monitor.....107 Intuitive parking assist..277...
  • Page 502 Alphabetical Index If the vehicle is submerged or Engine oil maintenance data .360 water on the road is rising ..406 Engine switch (power switch)176 If you have a flat tire.....428 Enhanced VSC ......294 If you lose your keys ....440 EPS (Electric Power Steering) If you think something is wrong ..........294 ...........
  • Page 503 Alphabetical Index Fuel Heated steering wheel..314 Capacity .......455 Outside rear view mirrors ..309 Fuel gauge .......86, 89 Seat heaters ......314 Information ......462 High mounted stoplight Refueling ......204 Replacing light bulbs ....397 Type ........455 High-voltage components ..73 Warning light ......415 Hill-start assist control...294 Fuel consumption Hood Average fuel economy ...94, 101...
  • Page 504 Alphabetical Index I/M test ........352 Keyless entry Identification Smart key system ....131 Engine ........455 Wireless remote control..115 Vehicle........454 Keys Ignition switch (power switch) Battery-saving function ..132 ..........176 Electronic key .......114 Changing the power switch If the electronic key does not modes ........179 operate properly ....442 Illuminated entry system ..317...
  • Page 505 Alphabetical Index Light bulbs Settings ......98, 105 Replacing ......396 Warning lights.......412 Lights Warning message....422 Automatic High Beam system Mirrors ...........197 Inside rear view mirror ..142 Front interior lights ....316 Outside rear view mirror defog- Front personal lights.....317 gers ........309 Headlight switch ....194 Outside rear view mirrors ..143 Interior lights......316 Vanity mirrors......332...
  • Page 506 Alphabetical Index Warning message ....422 Warning light......419 Warning message....190 Parking lights Light switch......194 Navigation system-linked display Replacing light bulbs ....396 .........97, 104 Wattage ........460 Noise from under vehicle ..5 Parking Support Brake function (for rear-crossing vehicles) .290 Function........290 Parking Support Brake function Odometer ......87, 91 (static objects) ......288 Odometer and trip meter display...
  • Page 507 Alphabetical Index Radiator........362 Safe Exit Assist.......272 RCTA Safety Connect ......66 Function .......266 Seat belt reminder light..415, 416 RCTA function......267 Seat belts........27 Rear Cross Traffic Alert (RCTA) Adjusting the seat belt ....29 ..........266 Automatic Locking Retractor ..29 Rear seats .......137 Child restraint system installation Head restraints.....139 ..........47 Rear side marker lights...
  • Page 508 Alphabetical Index Radar sensor....262, 273 Stuck RCTA........267 If the vehicle becomes stuck 452 Service plug ......73 Suggestion function..99, 106 Service reminder message..349 Sun visors .......332 Shift lever Sunshade Hybrid transmission....183 Roof........148 If the shift lever cannot be shifted Switches from P.........184 Automatic High Beam system Shift lock system....184 ...........197...
  • Page 509 Emergency towing ....407 Replacing light bulbs ....397 Towing eyelet......409 Wattage ........460 Trailer towing ......166 Tail lights/rear side marker lights Toyota Safety Sense 3.0 Replacing light bulbs ....396 Automatic High Beam...197 Theft deterrent system Dynamic radar cruise control244 Alarm........79 Emergency Driving Stop System Immobilizer system ....78...
  • Page 510 Alphabetical Index If the shift lever cannot be shifted Intuitive parking assist OFF indi- from P.........184 cator ........417 Paddle shift switches....185 LDA (Lane Departure Alert) 230, S mode.........185 Trip meters ......87, 91 Low engine oil pressure ..413 Turn signal lights LTA (Lane Tracing Assist) ...225, Replacing light bulbs ....396 Turn signal lever....187...
  • Page 511 Alphabetical Index Warning messages....422 Washer Checking ......364 Preparing and checking before winter........300 Switch........200 Washing and waxing....342 Weight Cargo capacity .....165 Load limits ......165 Wheels Replacing ......385 Replacing wheels ....379 Size ........460 Window lock switch ....147 Windows Power windows ....145 Rear window defogger ..309 Washer .........200 Windshield wiper de-icer ..312 Windshield wipers....200...
  • Page 512 Certifications Safety connect ...
  • Page 513 Immobilizer system ...
  • Page 514 Wireless remote control system ...
  • Page 515 Smart key system ...
  • Page 517 Intuitive parking assist ...
  • Page 518 Millimeter wave radar sensor ...
  • Page 519 Wireless charger ...
  • Page 520 BSM (Blind Spot Monitor) ...
  • Page 522 Tire pressure warning system ...
  • Page 524: Gas Station Information

    Tire inflation pressure (P.460) Fuel tank capacity 10.6 gal (40.0 L., 8.8 Imp. gal.) (Reference) P.455 Fuel type P.462 Cold tire inflation P.460 pressure Engine oil capacity (Drain and refill  P.456 reference) Engine oil type “Toyota Genuine Motor Oil” or equivalent P.456...

Table of Contents