Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 354

Table of Contents

Advertisement

352
7-3. Do-it-yourself maintenance
WARNING
When replacing wheels
Do not use wheels that are a differ-
ent size from those recommended
in the Owner's Manual, as this may
result in a loss of handling control.
Never use an inner tube in a leak-
ing wheel which is designed for a
tubeless tire.
Doing so may result in an accident,
causing death or serious injury.
When installing the wheel nuts
Be sure to install the wheel nuts
with the tapered ends facing
inward. (P.403) Installing the nuts
with the tapered ends facing out-
ward can cause the wheel to break
and eventually cause the wheel to
come off while driving, which could
lead to an accident resulting in
death or serious injury.
Never use oil or grease on the
wheel bolts or wheel nuts.
Oil and grease may cause the
wheel nuts to be excessively tight-
ened, leading to bolt or disc wheel
damage. In addition, the oil or
grease can cause the wheel nuts to
loosen and the wheel may fall off,
causing an accident and resulting in
death or serious injury. Remove any
oil or grease from the wheel bolts or
wheel nuts.
Use of defective wheels prohib-
ited
Do not use cracked or deformed
wheels. Doing so could cause the tire
to leak air during driving, possibly
causing an accident.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
NOTICE
Replacing tire pressure warning
valves and transmitters
Because tire repair or replacement
may affect the tire pressure warning
valves and transmitters, make sure
to have tires serviced by your
Toyota dealer or other qualified ser-
vice shop. In addition, make sure to
purchase your tire pressure warn-
ing valves and transmitters at your
Toyota dealer.
Ensure that only genuine Toyota
wheels are used on your vehicle.
Tire pressure warning valves and
transmitters may not work properly
with non-genuine wheels.
Aluminum wheel precau-
tions (if equipped)
 Use only Toyota wheel nuts and
wheel nut wrenches designed for
use with your aluminum wheels.
 When rotating, repairing or
changing your tires, check that
the wheel nuts are still tight after
driving 1600 km (1000 miles).
 17-inch tires: Be careful not to
damage the aluminum wheels
when using tire chains.
 Use only Toyota genuine balance
weights or equivalent and a plas-
tic or rubber hammer when bal-
ancing your wheels.

Advertisement

Table of Contents
loading

Table of Contents