Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 277

Table of Contents

Advertisement

• Compatible channel modes: stereo,
joint stereo, dual channel and monau-
ral
WMA file compatibility
• Compatible standards
WMA Ver. 7, 8, 9 (9.1/9.2)
• Compatible sampling frequencies
32, 44.1, 48 (kHz)
• Compatible bit rates (only compatible
with 2-channel playback)
Ver. 7, 8: CBR 48-192 (kbps)
Ver. 9 (9.1/9.2): CBR 48-320 (kbps)
AAC file compatibility
• Compatible standards
MPEG4/AAC-LC
• Compatible sampling frequencies
11.025/12/16/22.05/24/32/44.1/48(kHz)
• Compatible bit rates (compatible with
VBR)
8-320(kbps)
• Compatible channel modes
1ch, 2ch (Dual channel is not supported)
File names
The only files that can be recognized as
MP3/WMA/AAC and played are those
with the extension .mp3, .wma or .m4a.
ID3, WMA and AAC tags
ID3 tags can be added to MP3 files,
making it possible to record the track
title, artist name, etc.
The system is compatible with ID3 Ver.
1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags.
(The number of characters is based on
ID3 Ver. 1.0 and 1.1.)
WMA tags can be added to WMA files,
making it possible to record the track
title and artist name in the same way as
with ID3 tags.
AAC tags can be added to AAC files,
making it possible to record the track
title and artist name in the same way as
with ID3 tags.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
5-5. Using an external device
MP3, WMA and AAC playback
• When a device containing MP3, WMA
or AAC files is connected, all files in
the USB memory device are checked.
Once the file check is finished, the first
MP3, WMA or AAC file is played. To
make the file check finish more
quickly, we recommend that you do
not include any files other than MP3,
WMA or AAC files or create any
unnecessary folders.
• When the USB device is connected
and the audio source is changed to
USB memory mode, the USB device
will start playing the first file in the first
folder. If the same device is removed
and reinserted (and the contents have
not been changed), the USB memory
will resume play from the same point
in which it was last used.
Extensions
If the file extensions .mp3, .wma and
.m4a. are used for files other than MP3,
WMA and AAC files, they will be skipped
(not played).
Playback
• To play MP3 files with steady sound
quality, we recommend a fixed bit rate
of at least 128 kbps and a sampling
frequency of 44.1 kHz.
• There is a wide variety of freeware
and other encoding software for MP3,
WMA and AAC files on the market,
and depending on the status of the
encoding and the file format, poor
sound quality or noise at the start of
playback may result. In some cases,
playback may not be possible at all.
• Microsoft, Windows, and Windows
Media are registered trademarks of
Microsoft Corporation in the U.S.A.
and other countries.
WARNING
While driving
Do not connect USB memory or oper-
ate the controls. Doing so may cause
an accident, resulting in death or seri-
ous injury.
275
5

Advertisement

Table of Contents
loading

Table of Contents