376
8-2. Steps to take in an emergency
4
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
5
Securely attach cables or chains
to the towing eyelet.
Take care not to damage the vehicle
body.
6
Enter the vehicle being towed
and start the hybrid system.
If the hybrid system does not start, turn
the power switch to ON.
7
Shift the shift lever to N and
release the parking brake.
When the shift lever cannot be
shifted: P.169
■
While towing
If the hybrid system is off, the power
assist for the brakes and steering will
not function, making steering and brak-
ing more difficult.
■
Wheel nut wrench
Vehicle without wheel nut wrench:
Wheel nut wrench can be purchased at
your Toyota dealer.
Vehicle with wheel nut wrench: Wheel
nut wrench is installed in luggage com-
partment. (P.399)
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
If you think something is
wrong
If you notice any of the follow-
ing symptoms, your vehicle
probably needs adjustment or
repair. Contact your Toyota
dealer as soon as possible.
Visible symptoms
Fluid leaks under the vehicle.
(Water dripping from the air con-
ditioning after use is normal.)
Flat-looking tires or uneven tire
wear
Engine coolant temperature
gauge needle continually points
higher than normal.
Audible symptoms
Changes in exhaust sound
Excessive tire squeal when cor-
nering
Strange noises related to the
suspension system
Pinging or other noises related to
the hybrid system
Operational symptoms
Engine missing, stumbling or
running roughly
Appreciable loss of power
Vehicle pulls heavily to one side
when braking