Table of Contents
Advertisement
WARNING
●
If the part of the windshield in front
of the front camera is fogged up or
covered with condensation, or ice,
use the windshield defogger to
remove the fog, condensation, or
ice. (P.301)
●
If water droplets cannot be properly
removed from the area of the wind-
shield in front of the front camera by
the windshield wipers, replace the
wiper insert or wiper blade.
●
Do not attach window tint to the
windshield.
●
Replace the windshield if it is dam-
aged or cracked.
After replacing the windshield, the
front camera must be recalibrated.
Contact your Toyota dealer for
details.
●
Do not allow liquids to contact the
front camera.
●
Do not allow bright lights to shine
into the front camera.
●
Do not dirty or damage the front
camera.
When cleaning the inside of the
windshield, do not allow glass
cleaner to contact the lens of the
front camera. Also, do not touch the
lens.
If the lens is dirty or damaged, con-
tact your Toyota dealer.
●
Do not subject the front camera to a
strong impact.
●
Do not change the installation posi-
tion or direction of the front camera
or remove it.
●
Do not disassemble the front cam-
era.
●
Do not modify any components of
the vehicle around the front camera
(inside rear view mirror, etc.) or ceil-
ing.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
4-5. Using the driving support systems
●
Do not attach any accessories to
the hood, front grille or front bumper
that may obstruct the front camera.
Contact your Toyota dealer for
details.
●
If a surfboard or other long object is
to be mounted on the roof, make
sure that it will not obstruct the front
camera.
●
Do not modify the headlights or
other lights.
187
4
Advertisement
Table of Contents
