Page 2
Owner’s Manual. Each box contains operating instructions to help you avoid injury or equipment malfunction. All information in this Quick Reference Guide is current at the time of printing. Toyota reserves the right to make changes at any time without notice.
Page 3
TOYOTA AUDIO MULTIMEDIA 62-73 AND CONNECTED SERVICES Seats-Head restraints Visit your Toyota dealer for information on customizing this feature. Programmable by customer. Refer to the “Owner’s Manual” for instructions and more information. ® HomeLink is a registered trademark of Gentex Corporation.
OVERVIEW Instrument panel Paddle shifters Multi-Information Display (MID) control switches Full-Speed Range Dynamic Radar Cruise Control (DRCC) switches Audio control switches Audio volume control Telephone switch Lane Tracing Assist (LTA) switch switch Voice command talk switch Steering wheel controls Headlights/turn signals/ Windshield wiper and washer control fog lights control...
Page 5
If equipped. For details, refer to the “Owner’s Manual”, “Multimedia Owner’s Manual” or visit www.toyota.com/audio- multimedia for additional resources. Heated seat switches Corolla Cross Corolla Cross Hybrid Electric parking brake switch Brake hold switch VSC OFF switch Stop & Start cancel switch...
OVERVIEW Instrument cluster COROLLA CROSS Vehicles equipped with 4.2-in display Outside temperature Tachometer Clock Speedometer Shift position Display change button Fuel gauge indicator Odometer and trip meter display Engine coolant temperature gauge Multi-Information Display (MID) Vehicles equipped with 7-in display Analog speedometer/Tachometer Digital speedometer Outside temperature...
Page 7
COROLLA CROSS HYBRID Vehicles equipped with 4.2-in display Tachometer Outside temperature Speedometer Clock Shift position Display change button Fuel gauge indicator Odometer and trip meter display Engine coolant temperature gauge Multi-Information Display (MID) Vehicles equipped with 7-in display Hybrid System Indicator/Analog speedometer/Tachometer Digital speedometer Outside temperature Clock...
OVERVIEW Indicator symbols For details, refer to “Warning lights and indicators,” Section 2-1, 2023 “Owner’s Manual”. “AIR BAG ON/OFF” indicator Fog light indicator ABS (Anti-lock Brake System) Fuel tank door position warning Full-Speed Range Dynamic AHB (Automatic High Beams) Radar Cruise Control (DRCC) indicator indicator [white/green/orange]...
Page 9
If the indicator does not turn off within a few seconds of starting the vehicle, there may be a malfunction. Have the vehicle inspected by your Toyota dealer. If the indicator flashes or illuminates, there may be a malfunction. Refer to the “Owner’s Manual”.
OVERVIEW Keyless entry ( if equipped UNLOCKING OPERATION Smart Key Carry Smart Key remote Driver door unlock* Grasp Press ONCE: Driver door TWICE: All doors (Corolla Cross) NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety.
PANIC BUTTON Smart Key Press and hold (Corolla Cross) Smart Key system ( if equipped START FUNCTION Corolla Corolla Cross Cross Hybrid Corolla Corolla Cross Cross Hybrid NOTE: The Smart Key must be carried to enable the start function. With the shift lever in Park and the brake pedal depressed, press the power button.
OVERVIEW Fuel tank door release & cap COROLLA CROSS COROLLA CROSS HYBRID Pull Press OPENING/CLOSING Store Close Turn to open NOTE: Tighten until one click is heard. If the cap is not locked or tightened enough, the Check Engine indicator “ ”...
Engine oil filler cap Washer fluid tank Engine oil level dipstick NOTE: Regularly scheduled maintenance at your Toyota dealer, including oil changes, will help extend the life of your vehicle and maintain performance. Please refer to the “Warranty & Maintenance Guide.”...
Page 14
FEATURES & OPERATIONS Continuously variable transmission/ Hybrid transmission VEHICLES EQUIPPED WITHOUT PADDLE SHIFTERS - COROLLA CROSS / COROLLA CROSS HYBRID Park* + (“M” mode) Reverse Neutral Drive “M” position - (“M” mode) VEHICLES EQUIPPED WITH PADDLE SHIFTERS - COROLLA CROSS HYBRID Shift lever + (“M”...
Hybrid Synergy Drive System The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine and electric motor to provide the most efficient combination of power for the vehicle. When the brakes are applied, the braking force generates electricity, which is then sent to the traction battery to conserve energy. In addition, the engine shuts off when the vehicle is stopped.
- Doors lock when the vehicle speed is approximately 12 mph (20 km/h) or higher. Driver’s door linked door unlocking function - Doors automatically unlock when the driver’s door is opened. Refer to the “Owner’s Manual” or contact your Toyota dealer for more details. Door lock switches Lock...
Steering lock release (if equipped) Turn Turn When starting the engine, the engine switch may seem stuck in OFF. To free it, turn the key while turning the steering wheel slightly left and right. Tilt & telescopic steering wheel Angle Lock release lever Length Hold the steering wheel, push the lever down, set angle and length, and return the...
FEATURES & OPERATIONS Front seats-Adjustments MANUAL SEAT POWER SEAT (DRIVER SIDE ONLY) Seatback angle Seatback angle Seat position Vertical height (forward/backward) (driver side only) Lumber support Seat position (forward/backward), cushion (front) angle and vertical height Rear seats-Folding Pull Fold down Seats-Head restraints Rear outside Front...
Page 19
Rear door-Power Liftgate (if equipped) OPENING/CLOSING POWER LIFTGATE Instrument panel Liftgate opener switch (open only) Press Press Open: Press and hold Close: Press and hold again Power liftgate switch on the back door Lock switch on the back door Press Press When the back door is closed, all of the doors will lock simultaneously and operation signals...
FEATURES & OPERATIONS Electric parking brake PARKING BRAKE Driver side Automatic mode OFF Automatic mode ON Parking Parking brake light brake light Manual mode Parking brake light Automatic mode To turn automatic mode ON, while vehicle is stopped, pull and hold the parking brake switch until a buzzer sounds and a message displays on the Multi- Information Display (MID).
BRAKE HOLD Standby indicator Operating indicator Brake hold The brake hold system keeps the brake applied when the shift lever is in D, M* or N while the system is on and the brake pedal has been depressed to stop the vehicle.
FEATURES & OPERATIONS Multi-Information Display (MID) VEHICLES EQUIPPED WITH VEHICLES EQUIPPED WITH 4.2-in DISPLAY 7-in DISPLAY Driving support system status display area Driving support system status display area Content display area Content display area Return to the previous screen Press: Enter/Set Press and hold: Reset Scroll/search screens/ select menu icons...
Page 23
Steering wheel switches ® & telephone controls (Bluetooth “MODE” Press to change audio mode. Press and hold to mute or Return to the pause the audio. previous screen Start and end call Volume control Voice command “ ” talk switch Use to search within the selected audio feature.
Automatically switches between high and low beams as appropriate to enhance vision at night. Refer to Toyota Safety Sense™ 3.0 (TSS 3.0) in this guide or the “Owner’s Manual” for more details on the Automatic High Beams feature. * Operating conditions must be met. Refer to the “Owner’s Manual” for details.
FRONT FOG LIGHTS (IF EQUIPPED) Front fog lights come on only when the headlights are on low beam. TURN SIGNALS Right turn Lane change* Lane change* Left turn * Move the lever partway and release. The signals will flash three times. Windshield wipers &...
Page 26
Audio Multimedia Touchscreen display Turn the audio on/off and adjust the volume Refer to the “Multimedia Owner‘s Manual” or visit www.toyota.com/audio-multimedia for additional resources. NOTE: Always use safe driving practices and follow all traffic rules. Clock 1) Press “ ” on the main menu.
® programmed to operate garage doors, estate gates, security lighting, etc. Refer to the “Owner’s Manual” for more details. For programming assistance, contact HomeLink at 1-800-355-3515, or visit ® www.homelink.com/toyota. ® * HomeLink is a registered trademark of Gentex Corporation.
FEATURES & OPERATIONS Power outlet-12V DC The vehicle must be in the “ACCESSORY” or “IGNITION ON” mode for use. USB Type-C media port USB media port Connecting a compatible device and cable into the USB media port will support charging and music playback through the audio multimedia system. USB Type-C charge ports (if equipped) FRONT (IF EQUIPPED)
Qi Wireless charger (if equipped) Charging tray Power supply switch Charge area Operation indicator Press (1) light When the vehicle is turned off, the last state (ON/ OFF) of the charger is retained. Place (2) Place the device in the center of the charging area.
FEATURES & OPERATIONS Air conditioning/heating AUTOMATIC AIR CONDITIONING - COROLLA CROSS* / COROLLA CROSS HYBRID * If equipped. Without DUAL mode air conditioning system Airflow mode: Eco air conditioning mode Temperature control Fan speed control Windshield defogger Air Conditioning ON/OFF Climate control OFF S-FLOW mode Outside rear view...
Page 31
MANUAL AIR CONDITIONING (IF EQUIPPED) - COROLLA CROSS Fan speed control Temperature control Climate control ON/OFF “MAX A/C” switch Windshield defogger Air Conditioning ON/OFF Outside rear view mirror defoggers/ Outside air mode Rear window defogger Recirculate cabin air (outside air when OFF) Airflow mode:...
FEATURES & OPERATIONS Stop & Start Engine system (Corolla Cross only*) * Not applicable to Corolla Cross Hybrid. The Stop & Start system stops and starts the engine according to brake pedal or shift lever operation when the vehicle is stopped, such as at a stoplight, intersection, etc., in order to improve fuel economy and reduce noise pollution caused by the engine idling.
Driving mode select switch (Corolla Cross Hybrid only*) * Not applicable to Corolla Cross. Push or pull Normal mode Suitable for normal driving. Sport mode Use Sport mode when increased acceleration response and precise handling is desired, for example, when driving on roads with many curves. ECO drive mode Helps the driver accelerate in an eco-friendly manner and improve fuel economy through moderate throttle characteristics and by controlling the operation of the air...
FEATURES & OPERATIONS Rear view monitor system The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The camera for the rear view monitor system is located above the license plate. To adjust the image on the rear view monitor screen, press “...
Intuitive Parking Assist (if equipped) Front center sensor Corner sensor Corner sensor (front) (front) Corner sensor Corner sensor (rear) (rear) Rear center sensor The parking assist sonar system operates when the vehicle approaches an obstacle. The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by sensors and communicated via the Multi-Information Display (MID) and/or the multimedia display and a buzzer.
FEATURES & OPERATIONS Blind Spot Monitor (BSM) and Rear Cross Traffic Alert (RCTA) (if equipped) Outside rear view Outside rear view mirror indicator mirror indicator MID control switches Audio system screen* * RCTA only Driving assist information indicator BLIND SPOT MONITOR (BSM) The system is designed to use radar sensors to detect vehicles traveling in the Corolla Cross’s blind spot.
Page 37
Safe Exit Assist (SEA) (if equipped) Outside rear view mirror indicators Multi-Information Display (MID) Driving assist information indicator Safe Exit Assist is a system that uses rear side radar sensors installed on the inner side of the rear bumper to help warn occupants if an approaching vehicle or bicycle may collide with an opened door, before or as the door is being opened, to reduce the possibility of a collision.
Page 38
FEATURES & OPERATIONS Front and Rear Parking Assist with Automatic Braking (PA w/AB) (if equipped) Front and Rear Parking Assist with Automatic Braking consists of the following functions that operate when driving at a low speed or backing up, such as when parking.
Page 39
Refer to the “Owner’s Manual” for operation, setting adjustments, limitations and more details to understand these functions and complete safety precautions. For more information, please go to www.toyota.com/safety-sense. Pre-Collision System with Pedestrian Detection (PCS w/PD) PCS w/PD is designed to provide alert, mitigation, and/or avoidance support in certain conditions, when the system determines there is potential for a collision with a detected object.
Page 40
Over-The-Air (OTA) Updates Toyota Safety Sense 3.0 is capable of over-the-air updates. To use this function it is necessary to opt-in to the Connected Service Master Data Consent. In some instances when software is updated, the operating methods or functions may change.
Refer to the Toyota “Owner’s Manual” for a list of additional situations in which the system operation may be limited.
Page 42
As part of the Pre-Collision System, this function is also designed to first provide an alert and then automatic braking if needed. Refer to the Toyota “Owner’s Manual” for additional limitations and information. CHANGING PCS WARNING TIMING (1) Press “...
Page 43
PCS” and then press “ ” to turn PCS On/Off. (4) Press “ ” to go back to the menu. Refer to the Toyota “Owner’s Manual” for additional information on PCS w/PD operation, settings adjustments, limitations, and precautions before attempting to use it.
Green display is flashing Flashing Flashing Refer to the Toyota “Owner’s Manual” for additional information on LTA operation, settings adjustments, limitations, and precautions before attempting to use it. TURNING LANE TRACING ASSIST (LTA) ON/OFF Press the LTA switch to turn LTA ON/OFF.
Page 45
If LDA detects that the vehicle is swaying, a message will be displayed and a warning buzzer will sound to urge the driver to take a break. * See www.toyota.com/safety-sense for more information and limitations. Lane departure alert function Lane departure prevention function...
Page 46
TOYOTA SAFETY SENSE ™ LANE DEPARTURE ALERT (LDA) WITH STEERING ASSIST (CONTINUED) Operation of the Lane Departure Alert function is indicated by the following icons on the instrument cluster. Steering Indicator Lane display Operation icon System disabled illuminated illuminated illuminated...
Page 47
“ ” to turn the system On/Off. (4) Press “ ” to go back to the menu. Refer to the Toyota “Owner’s Manual” for additional information on LDA operation, settings adjustments, limitations, and precautions before attempting to use it.
20 mph. The system uses vehicle-to-vehicle distance control, helping maintain a preset distance from the vehicle ahead of you.* * See www.toyota.com/safety-sense for more information Refer to the Toyota “Owner’s Manual” for a list of additional situations in which the system operation may be limited. Meter display...
Page 49
ADJUSTING SET VEHICLE SPEED Increase speed/Resume Cancel Cancel Decrease speed (3) To change the set vehicle speed, press the “+” (increase) or “-” (decrease) switch until the desired speed is displayed. Press and hold to continuously adjust the speed in 1 mph (1.6 km/h) increments, or use a single press to adjust in individual increments of 1 mph (1.6 km/h).
Page 50
TOYOTA SAFETY SENSE ™ ADJUSTING DISTANCE (CONTINUED) (1) Constant speed cruising when there are no vehicles ahead The vehicle travels at the speed set by the driver. If the set vehicle speed is exceeded while driving down a hill, the set vehicle speed display will blink and a buzzer will sound.
Intended for highway use, Cruise Control lets you drive at a preset speed. The system is designed to function at speeds greater than 20 mph. Refer to the Toyota “Owner’s Manual” for a list of additional situations in which the system operation may be limited.
Refer to the Toyota “Owner’s Manual” for additional information on Cruise Control operation, settings adjustments, limitations, and precautions before attempting to use it.
See www.toyota.com/safety-sense for more information. Refer to the Toyota “Owner’s Manual” for additional information on AHB operation, settings adjustments, limitations, and precautions before attempting to use it. ACTIVATING THE AHB SYSTEM (1) Press the “...
Assist (RSA) is designed to detect certain road signs and display them on the instrument cluster. All vehicle actions must be driver-initiated and are not automated. Refer to the Toyota “Owner’s Manual” for additional information and limitations. SUPPORTED TYPES OF ROAD SIGNS The following types of road signs can be displayed.
Page 55
” to select or change a desired setting. (4) Press “ ” to go back to the menu. Refer to the Toyota “Owner’s Manual” for additional information on RSA operation, settings adjustments, limitations, and precautions before attempting to use it.
SAFETY & EMERGENCY FEATURES Seat belts Take up slack Too high Keep as low on hips as possible NOTE: If a passenger’s seat belt is fully extended, then retracted even slightly, the Automatic locking retractor (ALR) will prevent it from being re-extended beyond that point, unless fully retracted again.
Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safety Connect is staffed with live agents at the Toyota response center, which operates 24 hours per day, 7 days per week. Services for subscribers include: •...
SAFETY & EMERGENCY FEATURES Spare tire & tools (if equipped, Corolla Cross only*) * Not applicable to Corolla Cross Hybrid. TOOL LOCATION 2WD models Jack handle Jack Wheel nut wrench Wheel lock key (if equipped) Spare tire AWD models Wheel nut wrench Wheel lock key (if equipped) Jack handle Jack...
Page 59
REMOVE THE SPARE TIRE (1) Remove the luggage floor cover. (2) Remove the tool tray. 2WD models AWD models (3) Loosen the center fastener that secures the spare tire. Refer to the “Owner’s Manual” for tire changing and jack positioning procedures.
Page 60
SAFETY & EMERGENCY FEATURES Tire repair kit & tools (if equipped, Corolla Cross Hybrid only*) * Not applicable to Corolla Cross. TOOL LOCATION Wheel lock key (if equipped) Emergency tire puncture repair kit TIRE REPAIR KIT COMPONENTS Bottle Compressor Air pressure gauge Sticker Compressor switch Air release cap...
Multi-Information Display (MID). If the tire pressure indicator flashes for approximately 1 minute and then remains on, take the vehicle to your local Toyota dealer. Refer to the load label on the door jamb or the “Owner’s Manual” for tire inflation specifications.
ANTI-LOCK BRAKE SYSTEM (ABS) Toyota’s Anti-lock Brake System detects which wheels are locking up and limits wheel lockup by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure repeatedly for fractions of a second. This helps the tires attain the traction that current road conditions will allow, helping you to stay in directional control.
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven surfaces by applying brake force to the spinning wheel(s). Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip. TRAC limits engine output and applies the brakes to the spinning wheel. This transfers power to the wheels that still have traction to help keep you on track.
Page 64
Registering Your Vehicle Toyota app Bluetooth Pairing ® Connected Services Apple CarPlay ® Android Auto ™ SiriusXM ® Online Support Tool Updating System Software Scan QR Code to Download Toyota app Apple Android Do not attempt the process while driving.
Page 65
Registering Your Vehicle With the Toyota app, you will be connected to your Toyota on the go. Use the app to personalize your profile and take the customized vehicle settings and preferences for the multimedia features you enjoy most with you too. Get real time vehicle health information, enjoy remote service, manage your Connected Services subscriptions and more.
Page 66
GETTING STARTED WITH Toyota app Toyota app allows access to valuable information about your vehicle and control of capable features equipped with your vehicle. • • • Manuals & Warranties Schedule Maintenance Roadside Assistance SiriusXM ® Radio • • •...
Page 67
® Bluetooth Pairing Note: Do not attempt the Bluetooth ® Pairing process while driving. Select [GEAR ICON] from the main menu, then “Bluetooth & Devices.” STEP iPhone Bluetooth Menu Android Bluetooth Menu Ensure Bluetooth is turned on for Select “Manage devices”, then STEP STEP your phone.
Page 68
GETTING STARTED WITH ® Bluetooth Pairing (continued) If your device supports Apple While pairing your device, a STEP STEP message may display asking to CarPlay / Android Auto, select “Yes” to enable. check your device to allow syncing contacts and allow messaging. Note: You may also select “Skip”...
Connected Services Your vehicle may come available with a trial period for the following Connected Services. Learn more at www.toyota.com/connected-services/. Safety Connect • • (SOS) EMERGENCY ASSISTANCE ROADSIDE ASSISTANCE • BUTTON STOLEN VEHICLE LOCATOR • AUTOMATIC COLLISION NOTIFICATION Remote Connect (*if equipped) •...
Page 70
3. Poor cellular reception to the smartphone 4. Multiple applications running on a smartphone at the same time 5. Charge/media cable quality 6. Smartphone operating system updates may also affect Toyota app functionality For additional information, please visit: www.toyota.com/connected-services Connected Services Online Support Toyota’s online support tool provides intuitive “How-To”...
Page 71
STEP select the Apple CarPlay icon operate. You can go back to the ® on the top of the side menu bar. Toyota multimedia system by using the Toyota icon in the Apple CarPlay screen. ® Requirements: Bluetooth ® functions will be inoperable while CarPlay ®...
GETTING STARTED WITH ® Apple CarPlay (Compatible iPhone ® required) (continued) ® ® Siri through CarPlay Voice command talk switch * Screen depiction accurate at time of posting. Press and hold the voice command Once Siri is activated you can ask to: ®...
Page 73
* Screen depiction accurate at time of posting. Android Auto is now ready to ™ STEP operate. You can go back to the Toyota multimedia system by using the Toyota icon in the Android Auto screen. ™ ™ Google Assistant through Android Auto Voice command talk switch * Screen depiction accurate at time of posting.
To use this function it is necessary to opt-in to the Connected Service Master Data Consent. When the Toyota Audio Multimedia system software is updated, the operating methods of functions may change. Each update will identify the proper updating method to one or all of the following methods: •...
Page 75
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage and carrier.
Need help?
Do you have a question about the COROLLA CROSS 2023 and is the answer not in the manual?
Questions and answers
Снять лимит скорости