Table of Contents
Advertisement
162
4-2. Driving procedures
4-2.Driving procedures
Power (ignition) switch
Performing the following oper-
ations when carrying the elec-
tronic key on your person
starts the hybrid system or
changes power switch modes.
Starting the hybrid system
1
Check that the parking brake is
set. (P.171)
2
Check that the shift lever is in P.
3
Firmly depress the brake pedal.
and a message will be displayed
on the multi-information display.
If it is not displayed, the hybrid system
cannot be started.
4
Press the power switch shortly
and firmly.
When operating the power switch, one
short, firm press is enough. It is not
necessary to press and hold the switch.
If the "READY" indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal
until the "READY" indicator is illumi-
nated.
The hybrid system can be started from
any power switch mode.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
5
Check that the "READY" indica-
tor is illuminated.
The vehicle cannot be driven if the
"READY" indicator is off.
■
If the hybrid system does not start
●
The immobilizer system may not have
been deactivated. (P.71) Contact
your Toyota dealer.
●
If a message related to start-up is
shown on the multi-information dis-
play, read the message and follow the
instructions.
■
When the ambient temperature is
low, such as during winter driving
conditions
When starting the hybrid system, the
flashing time of the "READY" indicator
may be long. Leave the vehicle as it is
until the "READY" indicator is steady on,
as steady means the vehicle is able to
move.
■
Sounds and vibrations specific to a
hybrid vehicle
P.66
■
If the 12-volt battery is discharged
The hybrid system cannot be started
using the smart entry & start system.
Refer to P.409to restart the hybrid sys-
tem.
■
Electronic key battery depletion
P.106
■
Conditions affecting operation
P.129
■
Notes for the entry function
P.129
■
Steering lock function
●
After turning the power switch off and
opening and closing the doors, the
steering wheel will be locked due to
the steering lock function. Operating
the power switch again automatically
cancels the steering lock.
●
When the steering lock cannot be
Advertisement
Table of Contents
