Table of Contents
Advertisement
228
4-5. Using the driving support systems
Rear center sensor detection
Audio system screen (if
equipped)
When the R shift lever is selected, a
simplified image is displayed on the
audio system screen.
Turning Toyota parking
assist-sensor on/off
Use the meter control switches to
enable/disable the Toyota parking
assist-sensor. (P.93)
When the Toyota parking
assist-sensor function is disabled,
the Toyota parking assist-sensor
OFF indicator (P.80) illuminates.
1
Press
2
Press
and then press
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
or
to select
.
or
to select
.
To re-enable the system when it
was disabled, select
multi-information display, select
and then on. If disabled using this
method, the system will not be
re-enabled by turning the power
switch off and then to ON.
WARNING
■
When using the Toyota parking
assist-sensor
Observe the following precautions.
Failing to do so may result in the vehi-
cle being unable to be driven safely
and possibly cause an accident.
●
Do not use the sensor at speeds in
excess of 10 km/h (6 mph).
●
The sensor's detection areas and
reaction times are limited. When
moving forward or reversing, check
the areas surrounding the vehicle
(especially the sides of the vehicle)
for safety, and drive slowly, using
the brake to control the vehicle's
speed.
●
Do not install accessories within the
sensor's detection areas.
●
The area directly under the bump-
ers is not detected.
Thin posts or objects lower than the
sensor may not be detected when
approached, even if they have been
detected once.
■
When to disable the function
In the following situations, disable the
function as it may operate even
though there is no possibility of a colli-
sion.
●
The vehicle is equipped with a
fender pole, wireless antenna or fog
lights.
●
The bumper or a sensor receives a
strong impact.
on the
Advertisement
Table of Contents
