Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 357

If dust and clogs cannot be
completely removed
If dust and clogs cannot be com-
pletely removed with the air intake
vent cover installed, remove the
cover and clean the filter.
1
Turn the power switch off.
2
Using a Phillips screwdriver,
remove the clip.
3
Remove the air intake vent
cover.
Pull the cover as shown in the
illustration to disengage the 3
claws, starting from the claw in
the upper right corner.
Pull the cover toward the front of
the vehicle to remove it.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
7-3. Do-it-yourself maintenance
4
Remove the air intake vent filter.
Disengage the claw as shown in
the illustration.
Remove the filter from the cover.
5
Remove the dust and clogs from
the filter using a vacuum
cleaner, etc.
Make sure to also remove the dust and
clogs from the inside of the air intake
vent cover.
6
Reinstall the filter to the cover.
Engage the filter to the 2 claws
355
7