Table of Contents
Advertisement
3
Remove the fuse with the pull-
out tool.
Only type A fuse can be
removed using the pullout tool.
4
Check if the fuse is blown.
Replace the blown fuse with a new fuse
of an appropriate amperage rating. The
amperage rating can be found on the
fuse box lid.
Type A
Normal fuse
Blown fuse
Type B
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
7-3. Do-it-yourself maintenance
Normal fuse
Blown fuse
Type C
Normal fuse
Blown fuse
Type D
Normal fuse
Blown fuse
■
After a fuse is replaced
●
When installing the lid, make sure that
the tab is installed securely.
●
If the lights do not turn on even after
the fuse has been replaced, a bulb
may need replacement. (P.362)
●
If the replaced fuse blows again, have
the vehicle inspected by your Toyota
dealer.
■
If there is an overload in a circuit
The fuses are designed to blow, protect-
ing the wiring harness from damage.
361
7
Advertisement
Table of Contents
