Table of Contents
Advertisement
410
8-2. Steps to take in an emergency
Restarting the hybrid sys-
tem
If you have a set of jumper (or
booster) cables and a second vehi-
cle with a 12-volt battery, you can
jump start your vehicle by following
the steps below.
1
Vehicles with an alarm (P.75):
Confirm that the electronic key
is being carried.
When connecting the jumper (or
3
Connect a positive jumper cable clamp to
nect the clamp on the other end of the positive cable to
ond vehicle. Then, connect a negative cable clamp to
vehicle and connect the clamp at the other end of the negative cable to
.
Positive (+) battery terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Solid, stationary, unpainted metallic point away from the battery and any
moving parts as shown in the illustration
4
Start the engine of the second
vehicle. Increase the engine
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
booster) cables, depending on the situ-
ation, the alarm may activate and doors
locked. (P.76)
2
Open the hood. (P.334)
on your vehicle and con-
on the second
speed slightly and maintain at
that level for approximately 5
on the sec-
Advertisement
Table of Contents
