Table of Contents
Advertisement
124
3-2. Opening, closing and locking the doors
WARNING
●
If a heavy object is attached to the
back door, the back door may not
operate, causing a malfunction, or
the back door may suddenly shut
again after being opened, causing
someone's hands, arms, head or
neck to be caught and injured. Do
not attach any accessories other
than genuine Toyota parts to the
back door.
■
Jam protection function
Observe the following precautions.
Failure to do so may cause death or
serious injury.
●
Never use any part of your body to
intentionally activate the jam pro-
tection function.
●
The jam protection function may not
work if something gets caught just
before the back door fully closes.
Be careful not to get fingers caught
or anything else.
●
The jam protection function may not
work depending on the shape of the
object that is caught. Be careful not
to catch fingers or anything else.
■
Hands Free Power Back Door
Observe the following precautions
when operating the Hands Free
Power Back Door. Failure to do so
may cause death or serious injury.
●
Check the safety of the surrounding
area to make sure there are no
obstacles or anything that could
cause any of your belongings to get
caught.
●
Exhaust gasses cause the exhaust
pipes to become quite hot. When
operating the Hands Free Power
Back Door, be careful not to touch
the exhaust pipe.
●
Do not operate the Hands Free
Power Back Door if there is little
space under the rear bumper.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
NOTICE
■
Back door spindles
The back door is equipped with spin-
dles that hold the back door in place.
Observe the following precautions.
Failure to do so may cause damage
to the back door spindle, resulting in
malfunction.
●
Do not attach any foreign objects,
such as stickers, plastic sheets, or
adhesives to the spindle rod.
●
Do not attach any accessories
other than genuine Toyota parts to
the back door.
●
Do not place your hand on the spin-
dle or apply lateral forces to it.
■
To prevent back door closer mal-
function
Do not apply excessive force to the
back door while the back door closer
is operating. Applying excessive force
may cause the back door closer to
malfunction.
■
To prevent malfunction of the
power back door
●
Make sure that there is no ice
between the back door and frame
that would prevent movement of the
back door. Operating the power
back door when excessive load is
present on the back door may
cause a malfunction.
●
Do not apply excessive force to the
power back door while the back
door is operating.
Advertisement
Table of Contents
