Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 100

98
2-1. Instrument cluster
start/after reset. (P.94)
 (if equipped)
Select to display/not display the audio
system linked display.

Select to change the displayed content
of the following:
• Display contents
Select to display/not display the energy
monitor. (P.99)
• Drive information type
Select to change the drive information
type display between after start/after
reset.
• Drive information items
Select to set the first and second items
of the drive information display to any of
the following: average vehicle
speed/distance/elapsed time.
 Current trip result display
Select to change the displayed informa-
tion about the current trip, measured
from when the hybrid system was
started until it was stopped, between
drive information/eco score. (The infor-
mation will be displayed temporarily
when the hybrid system is stopped.)
 Pop-up display
Select to enable/disable pop-up dis-
plays for each relevant system.
 Multi-information display off
Select to turn the multi-information dis-
play off.
To turn the multi-information display on
again, press any of the following meter
control switches
/ /
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
/ / / .
 Default setting
Select to reset the meter display set-
tings to the default setting.
■ Vehicle functions and settings
that can be changed
P.427
■
Suspension of the settings display
●
Some settings cannot be changed
while driving. When changing set-
tings, park the vehicle in a safe place.
●
If a warning message is displayed,
operation of the settings display will
be suspended.
WARNING
■
Cautions during setting up the
display
If the hybrid system is operating while
changing certain settings on the set-
tings display, ensure that the vehicle
is parked in a place with adequate
ventilation. In a closed area such as a
garage, exhaust gases including
harmful carbon monoxide (CO) may
collect and enter the vehicle. This
may lead to death or a serious health
hazard.
NOTICE
■
During setting up the display
To prevent 12-volt battery discharge,
ensure that the hybrid system is oper-
ating while setting up the display fea-
tures.