Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 377

If you cannot tie down the vehicle
using the method above, use tire
strapping belts.
NOTICE
■
Using a flatbed truck
Do not overly tighten the tie downs or
the vehicle may be damaged.
Emergency towing
If a tow truck is not available in an
emergency, your vehicle may be
temporarily towed using cables or
chains secured to the emergency
towing eyelets. This should only be
attempted on hard surfaced roads
for short distances at under 30
km/h (18 mph).
A driver must be in the vehicle to
steer and operate the brakes. The
vehicle's wheels, drive train, axles,
steering and brakes must be in
good condition.
Emergency towing proce-
dure
To have your vehicle towed by
another vehicle, the towing eyelet
must be installed to your vehicle.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
8-2. Steps to take in an emergency
Install the towing eyelet using the
following procedure.
1
Take out the wheel nut wrench
(if equipped) and towing eyelet.
(P.390, 399)
2
Remove the eyelet cover using
a flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
3
Insert the towing eyelet into the
hole and tighten partially by
hand.
375
8