Table of Contents
Advertisement
WARNING
●
When a junior seat (booster seat) is
installed, always ensure that the
shoulder belt is positioned across
the center of the child's shoulder.
The belt should be kept away from
the child's neck, but not so that it
could fall off the child's shoulder.
●
Follow all installation instructions
provided by the child restraint sys-
tem manufacturer.
Child restraint system fixed
with an ISOFIX lower
anchorage
■
ISOFIX lower anchorages
(ISOFIX child restraint system)
Lower anchorages are provided for
the outboard rear seats. (Tags dis-
playing the location of the anchor-
ages are attached to the seats.)
■
Installation with ISOFIX lower
anchorage (ISOFIX child
restraint system)
Install the child restraint system in
accordance to the operation man-
ual enclosed with the child restraint
system.
If the child restraint system on hand
is not within the "universal" cate-
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
1-2. Child safety
gory (or the necessary information
is not in the table), refer to the
"Vehicle List" provided by the child
restraint system maker for various
possible installation positions, or
check the compatibility after asking
the retailer of the child seat.
(P.46, 47)
1
If the head restraint interferes
with your child restraint system,
and the head restraint can be
removed, remove the head
restraint.
Otherwise, put the head
restraint in the upper most posi-
tion. (P.139)
2
Latch the buckles onto the
exclusive fixing bars.
Check the positions of the exclusive fix-
ing bars, and install the child restraint
system to the seat.
The bars are installed in the clearance
between the seat cushion and
seatback.
3
After installing the child restraint
system, rock it back and forth to
57
1
Advertisement
Table of Contents
