Table of Contents
Advertisement
3
Remove the light bulb.
4
Install a new light bulb, and then
install the bulb base to the light
unit by inserting it and turning it
clockwise.
5
Install the cover.
Align the tabs of the cover with the
grooves and install the cover.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
7-3. Do-it-yourself maintenance
■
License plate lights
1
Remove the lens.
Lens
Hook
1
Insert a small flathead screw-
driver, etc. into either the right or
left hole of the lens.
2
Push the screwdriver sideways
in the direction of the arrow
shown in the illustration, disen-
gage the hook, and then remove
the lens.
To prevent damage to the vehicle, wrap
the tip of the screwdriver with tape, etc.
367
7
Advertisement
Table of Contents
