Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 396

394
8-2. Steps to take in an emergency
9
Connect the power plug to the
power outlet socket. (P.314)
10Attach the sticker provided with
the tire puncture repair kit to a
position easily seen from the
driver's seat.
11Check the specified tire inflation
pressure.
Tire inflation pressure is specified on
the label on the driver's side pillar as
shown. (P.424)
12Start the hybrid system.
(P.162)
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
13To inject the sealant and inflate
the tire, turn the compressor
switch on.
14Inflate the tire until the specified
air pressure is reached.
The sealant will be injected and
the pressure will spike to
between 300 kPa (3.0 kgf/cm
or bar, 44 psi) and 400 kPa (4.0
2
kgf/cm or bar, 58 psi), then
gradually decrease.
The air pressure gauge will dis-
play the actual tire inflation pres-
2