GRAPHTEC LABELROBO LCX603 User Manual page 7

Move the pen carriage slowly when moving it manually
in order to load the medium or for other reasons.
• Moving it quickly may damage the label printer
Run a test cut when cutting materials with unknown
condition settings.
• Running a cut operation with incorrect setting values may
cause a large overload to the blades and device or a
system breakdown.
Safety Precautions
When using indoor lighting such as fluorescent
lamps and desk lamps, make sure the label printer is
separated by at least 1 m.
• Placing the label printer too close to such lighting may
cause sensor malfunctions and the paper detection to not
function efficiently.
Before use, check that the power is turned off by
pressing the Emergency Stop Switch.
Safety Precautions
v