GRAPHTEC LABELROBO LCX603 User Manual page 10

PREFACE
Precautions on the Handling of Cutter Pens
This product uses a cutting blade. To prevent injuries (when replacing the cutter blade, installing the cutter pen, etc.),
take the following precautions when handling the cutter blade.
Cutter Blade
The blades are sharp. Be careful not to cut your fingers or prick yourself when handling the cutter pen.
Return used blades to the accessory cutter blade case and throw them all out together when the whole case has been
filled.
Cutter Pen
The tip consists of a sharp blade. Do not extend it too far.
The methods for extending the blade and replacing it are described in Chapter 2 of this manual.
After Mounting the Cutter Pen
After the power has been turned on, and during operation, do not touch the pen tip. It is dangerous.