Table of Contents
Advertisement
Do not allow dust or metallic matter to adhere to the
power plug.
•
Use of a different supply voltage may result in electrical
shock or a fire hazard due to current leakage.
Handle cutter blades with care.
•
Avoid direct contact with the cutter blade. Touching the
blade with your bare hand may cause injury.
•
During a cutting operation, keep away from the cutter
blade.
Do not use or store the label printer in a location
exposed to direct sunlight or the direct draft of an air
conditioner or heater.
• Such locations may impair the performance of the label
printer.
Do not place a coffee cup or any other receptacle
containing water or other fluid on top of the label
printer.
•
Fluid falling inside the label printer may cause electrical
shock or a fire hazard due to current leakage.
Safety Precautions
Do not use the power cord if it is damaged.
•
Use of a damaged cord may result in electrical shock or a
fire hazard due to current leakage.
•
Replace the power cord with a new one.
Do not use or store the label printer in an excessively
dusty or humid location.
•
Such locations may impair the performance of the label
printer.
Do not install, use, or store the label printer in a
location subject to excessive mechanical vibration or
electrical noise.
•
Such locations may impair the performance of the label
printer.
Safety Precautions
Advertisement
Table of Contents
Need help?
Do you have a question about the LABELROBO LCX603 and is the answer not in the manual?
Questions and answers