Table of Contents
Advertisement
Chapter 6 Maintenance
6.7
Cleaning of Cutter Pen
When paper dust, media cutting scraps and the like reamain stuck to the tip of the cutter blade, the rotation of the blade
becomes poor, causing the quality of cutting to degrade.
Please regulary clean the cutter pen to keep it free of paper dust, media cutting scraps, etc.
To avoid bodily injury, handle cutter blades with care.
Cleaning
Please clean off any paper dust, regular dust, etc. stuck on the tip of the cutter pen. Return the cutter pen to its original
state after you have finished cleaning.
Clean around the cutter blade insertion hole on the plunger cap by turning the cap and removing it.
Plunger-cap
Clean
Cutter blade
Attach the plunger cap.
6-11
Advertisement
Table of Contents
Need help?
Do you have a question about the LABELROBO LCX603 and is the answer not in the manual?