14 ELECTRICAL SYSTEM
14.13
14.14
96
Adjusting the headlight range
V02744-10
Changing the combination instrument battery
S03312-10
S03313-10
Preparatory work
–
Check the headlight setting. (
Main work
–
1
Loosen screw
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how to
apply the mark: Checking the headlight setting).
Info
If you have a payload, you may have to correct the headlight
range.
–
1
Tighten screw
.
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove cable tie(s)
.
–
Disconnect plug-in connector
–
3
Remove screws
.
–
Using a coin, turn protection cap
and take it off.
–
Remove combination instrument battery
–
Insert the combination instrument battery with the label facing out-
ward.
Combination instrument battery (CR 2430) (
–
Check the O-ring of the protection cap for correct seating.
p. 95)
p. 92)
2
.
4
all the way counterclockwise
5
.
p. 121)