Knoll Antenna Workspaces Installation Instructions Manual page 15

Desk with Return (Inset Leg on Return)
Desk
Assembly
Return
Assembly
Desk with Return Plan View
Steps 5 and 6
¼-20 x 1" Machine Screw (H)
Steps 2, 3 and 10
Steps 8 and 11
#14 x 1" FH Wood Screw (J)
Exploded Return Assembly Detail
Horizontal
rail cradle on
desk must be
positioned at
end of rail.
Aligned (Use
install gauge to
properly locate.
See Install
Gauge
Guidelines.)
Desk
End Leg
Exploded Return Assembly Plan View
/
¼-20 x 5 " machine
8
screw (I)
¼-20 x 1" Machine Screw (H)
Return Rail Clamp
Bottom Bracket (E)
Cradle Clamp
Bracket (B)
#14 x 1" FH Wood
Screw (J)
Step 12
Return Rail
Hook Top
Bracket (D)
W-Bracket (F)
Return Rail
Horizontal
Rail
Cradle (A)
Step 4