Antenna Telescope Single Sided Table Bases; Standard Electric And Extended Electric; Planning Guidelines And Specfications - Knoll Antenna Workspaces Installation Instructions Manual

Antenna Telescope Single Sided Table Bases

Standard Electric and Extended Electric

Planning Guidelines and Specifications
Antenna Telescope Single Sided tables are
comprised of a top supported by a pair of rails
and a center beam, which spans between two
crossbars connecting the workstation round
columns to a wood back panel. Each workstation
is supported by two electric controlled columns in
combination with a wood back panel to the floor
that corresponds in width and depth to the top.
Tops for Telescope single sided tables are
standard Telescope tops available in 24",
27" and 30" depths and available in every
6" increment of width from 47" – 84".
Columns for Telescope single sided tables are
inset 12" from the front edge of 24", 27" and 30"
deep tops. Bases are available in two height
ranges – Standard Electric and Extended Electric.
Both electric base types have button controls on
the front edge of the top to adjust the top up and
down. All single sided bases include a center beam
and an optional utility tray may be specified.
Telescope Single Sided Specification Key
N
N
R
L
L
L
R
S
L
S
Specify Telescope single sided bases in one of four
configurations: "N" for no crossbar connections if
workstation is standalone without end panels; "R"
for base in the right position, connecting to another
base or end panel on the left side; "L" for base in
the left position, connecting to another base or end
panel on the right side; and "S" for base connecting
to either another base or end panel on both sides.
Back panels for single sided tables are required to
provide counterbalance, allowing each workstation
to be engineered without feet for ultimate user
freedom and comfort. Back panels are available
in desk height, 42" and 49" high and widths
corresponding to tops from 48" – 84" wide.
Specify back panels in one of four configurations:
"N" for no connecting to end panels; "R" for
connecting to end panel on the right side; "L" for
connecting to end panel on the left side; and "S"
for standalone workstation connecting to end
panels on both sides. Telescope Single Sided
tables with back panels and 2" deep tops are
30" deep overall; 27" deep tops are 33" deep
overall; and 30" deep tops are 36" deep overall.
N
L
L
R L
S
R
N N
R L
R L
R L
S S
Telescope Single Sided Base Key
N= No crossbar connections
R= Right position, connecting on left
L= Left position, connecting on right
S= Surround, connecting both sides
Telescope Back Panels for Single Sided Tables Key
N= No connecting end panels
R= Connecting to end panel on the right
L= Connecting to end panel on the left
S= Surround, connecting to end panels on both sides
Telescope End Panels for Single Sided Tables Key
R= Right hand
L= Left hand
End panels are optional for single sided tables to
conceal the end of a run and must be specified
corresponding in width to top depth—24", 27"
and 30" deep, and corresponding in height to
back panels—desk height, 42" and 49" high. End
panels are handed left or right for attachment to
Telescope back panels for single sided tables.
Returns can be attached anywhere along
Telescope single sided tables by specifying a return
base kit and return top. To calculate the return
base size required for attaching to Telescope single
sided tables, take the return top width and add 24".
Telescope single sided stations accept
Telescope desk screens or fixed center
screens for additional privacy.
N N
L
S R
N R
S S
R