Desk, Table Desk, Or Big Table With Suspended Storage - Knoll Antenna Workspaces Installation Instructions Manual

Desk, Table Desk, or Big Table with Suspended Storage

Pattern Numbers Represented:
Suspended File, YSSPF___
Suspended Open Cabinet, YSSO___
Part List:
Storage Hanging Bracket (A)
¼-20 x 1 ¼" Machine Screw (B)
¼- 20 x / " Set Screw (C)
3
8
Tools Needed:
Drill
Phillips #2 and #3 bits
/ " Allen Key
1
8
STEPS:
1. Suspended storage should be attached prior to
the top being fastened to the base assembly.
2. Attach (4) storage hanging brackets (A) loosely
to top of pedestal using (4) ¼–20 X 1¼"
machine screws (B). They should be loose
enough to easily slide along horizontal rails.
: Several file and open cabinet
Note
configurations have multiple drillings in the
top of the case. When determining placement
of the storage hanging brackets, be sure
Exploded Table Desk Assembly
with Suspended Open Cabinet
A.) 3AB4063*
Note: two views of bracket shown
3AB4063
to use the drillings appropriate for your
application's rail spacing and top size. The
face of the file or cabinet should not protrude
from the worksurface's front or side edges.
3. For a desk assembly, the requested positioning
of pedestal on the interior or exterior of the
leg will dictate the exact position of leg itself.
Once determined, pedestal should slide
along the horizontal rails into position.
B.) 3AB407640
4. Once the storage unit is correctly
positioned, tighten machine screws (B).
Before top is fastened to base assembly,
use (4) set screws (C) to secure hanging
brackets into position on rail
Storage Hanging Brackets (A)
¼-20 x / " Set Screw (C)
3
8
¼-20 x 1¼" Machine Screw (B)
Suspended Storage Unit
C.) 4A2200740
Desk Assembly with
Suspended Open Cabinet