Knoll Antenna Workspaces Installation Instructions Manual page 113

Desktop End screens are designed to plan
at either end of Antenna desks, linked desk
configurations, big tables or Telescope, Tone and
k. stand height-adjustable tables to delineate
individual workspaces from circulation paths.
End screens include a painted steel desktop
mounting bracket that supports framed, tackable
fabric or frameless glass, veneer, laminate or
marker surface to a horizon of 42" or 49".
End screen brackets allow the screen to
mount flush with the end of the top and may
be used in combination with end panels.
End screens are full depth and correspond to
Antenna top depths, 18", 24", 27", 30" and 36" as
well as Tone and k. stand Dividends Horizon and
Reff Profiles style top depths, 23", 29" and 35".
Full Depth Desktop End Screen (Upholstered)
Full Depth Desktop End Screen (Non-Upholstered)
End screens attach with a clamp bracket around
the front and back edges of the top. End screens
may not be used with hinged access tops.
CONSTRUCTION
Fabric screens are 1 ¼" thick, with perimeter
extruded aluminum frame, extruded aluminum
base frame, cast steel clamp brackets
and cast aluminum bayonets. Tackable
fabric surfaces are / " thick PET core, on
3
8
either side of ½" thick particle board.
Laminate, veneer and glass screens are
½" thick, frameless, with a 1 ¼" high x 1
¼" wide extruded aluminum base frame
and cast steel clamp brackets.
SPECIFICATION OPTIONS
For fabric screens, specify with an Antenna
approved textile. Specify perimeter
frame in any Knoll Core paint finish.
For frameless screens, specify surface type:
laminate (L) or veneer (V) or glass (G) finish in
any Knoll Core laminate, patterned or woodgrain
laminate, marker surface (M), any Core Techwood
or natural veneer, or Core glass finishes.
Specify bracket, in any Knoll core paint finish.
Linked Desks with Desktop End
Screens and Desk Screens