Table of Contents
Advertisement
Getting Started
Introduction
The N36XX scan engine is designed for integration into a wide range of OEM devices. The scan engine's compact mechanical
design can drop into many existing applications, allowing OEMs and third-party manufacturers to integrate the benefits of
image-based scanning into a variety of devices, including hand held computers, PDTs, medical instrumentation, kiosks, diag-
nostic equipment, and robotics. The N36XX unit decodes linear, 2D, and postal codes.
About This Manual
This User's Guide provides demonstration, installation, and programming instructions for the N36XX scan engine.
Honeywell's bar code scan engines are factory programmed for the most common terminal and communications settings. If you
need to change these setting, programming is accomplished by scanning the bar codes in this guide.
An asterisk (*) next to an option indicates the default setting.
Unpacking Your Device
After you open the shipping carton containing the OEM scan engine(s), take the following steps:
• Check for damage during shipment. Report damage immediately to the carrier who delivered the carton.
• Make sure the items in the carton match your order.
• Save the shipping container for later storage or shipping.
OEM Scan Engine Models
There are two models of the OEM scan engine, which may be used with the interfaces described in this manual. Refer to the
chart below to determine the models that can be used with your interface.
Models
N3680SR-W1-TTL
N3680SR-W1-USB
Interface
Decoding Capability
TTL Level 232
Full-Speed USB
Linear, 2D, postal
Linear, 2D, postal
1 - 1
Advertisement
Table of Contents
