Upc-E0 Leading Zero; Upc-E0 Addenda; Upc-E1 - Honeywell HH1800 User Manual

UPC-E0 Leading Zero

This feature allows the transmission of a leading zero (0) at the beginning of scanned data. To
prevent transmission, scan Off. Default = On.

UPC-E0 Addenda

This selection adds 2 or 5 digits to the end of all scanned UPC-E data. Default = Off for both 2
Digit and 5 Digit Addenda.

UPC-E1

Most U.P.C. barcodes lead with the 0 number system. For these codes, use
103). If you need to read codes that lead with the 1 number system, use the UPC-E1 On
selection. Default = Off.
HH1800 User Guide
* On
2 Digit Addenda On
5 Digit Addenda On
UPC-E1 On
Off
* 2 Digit Addenda Off
* 5 Digit Addenda Off
UPC-E0 (page
107