MODEL 2234 DIGITAL FLOW COMPUTER ___________________________
3.6.1 TRANSDUCER SCALING
Read Codes for transducer scaling will display the full scale and zero values that
are used by the computer to scale measured input signals from the respective
transducers. Transducer scaling is displayed only as FXD values. The values may
be changed by the operator by keying in the new values and pressing ENTR.
A.
Temperature Transducer Full Scale (TFS) - Read Code 5
Temperature Transducer Zero (TZ) - Read Code 6
Full scale and zero temperature values, used by the computer to scale
input signals from the temperature transducer, are displayed by using
Read Codes 5 and 6. Temperature is displayed in degrees Fahrenheit.
B.
Densitometer Full Scale (GFS) - Read Code 7
Densitometer Zero (GZ) - Read Code 8
Full scale and zero density values, used by the computer to scale input
signals from the analog densitometer, are displayed by using Read
Codes 7 and 8. Density values are displayed in LBF3 (pounds per
cubic foot).
SECTION 3
85