Table of Contents
Advertisement
__________________________ MODEL 2234 DIGITAL FLOW COMPUTER
C.
The Model 2234 Mass Flow Computer can be used without
modification to measure liquids. The changes and uses of operator-
entered parameters are described in paragraph 3.5.
2.6.3.3 ENABLING THE "DISPLAY ALWAYS ON" FUNCTION
The operator can cause the computer display to remain ON if desired. Key 1, then
press CMD. The display can be returned to the "power-save" timeout mode by
keying 2, then pressing CMD.
When the instrument startup procedures are complete, set the internal
"enable/disable" switch on PC Board No.1 to the "disable" position to prevent
unauthorized or accidental data entry. Ensure that the green "enable" indicator
lamp on the front panel is OUT.
46
Orifice Measurement of Liquids:
SECTION 2
Advertisement
Table of Contents
