Table of Contents
Advertisement
__________________________ MODEL 2234 DIGITAL FLOW COMPUTER
B.
The operator may request the computer to perform three types of action.
(NOTE: The "enable/disable" switch must be "enabled" and the green
"enable" lamp on the front panel must be ON.
1.
Control the display (ON all the time/ON for one minute);
2.
Display any out-of-tolerance (error) conditions;
(See Table 3-3).
3.
Reset flow totals for mass;
Instructions for requesting these actions from the computer are described in
paragraph 3.7.
68
SECTION 3
Advertisement
Table of Contents
