Operational Overview - DANIEL 2234 Manual

MODEL 2234 DIGITAL FLOW COMPUTER ___________________________
3.3

OPERATIONAL OVERVIEW

The computer uses a prompting sequence during initial startup. The prompting
sequence assists the operator with the entering of essential measurement parameters
which the computer requires in determining flow rates and flow totals. Details of
the startup procedures are located in paragraph 2.6 of this manual.
Once the initial startup is complete, the operator may access data, enter additional
parameters, revise previously entered parameters, and request specific computer
actions. The two categories of operator control are described as follows. Refer to
Tables 3-1 and 3-2, Read Codes and Command Codes.
A. The operator may access or enter specific parameters relating to the data
measurement, such as:
1. Cause the computer to display a specific measurement parameter; (i.e.,
temperature, flow rate, flow total, etc.).
2. Substitute a selected value for a measured (varying) or a computed
value.
Instructions for accessing data are described in detail in paragraph 3.6.
SECTION 3
67