Installation And Initial Startup; General; Unpacking; Damage In Shipment - DANIEL 2234 Manual

MODEL 2234 DIGITAL FLOW COMPUTER ___________________________
2.0

INSTALLATION AND INITIAL STARTUP

2.1

GENERAL

This section contains instructions for unpacking and inspecting the computer,
handling damage claims, and shipping instructions in the event the computer is to
be returned to the factory. In addition, this section contains installation instructions
and computer startup procedures.
2.2

UNPACKING

Carefully unpack the computer. Retain all packing materials. Thoroughly inspect
the Model 2234 for visual damage. Inspect the power supply at the rear of the
chassis, the printed circuit boards and the front panel which contains the push-
button controls and the LED display monitor. Keep the packing materials until
after the computer is put on-line and its operation is checked.
2.3

DAMAGE IN SHIPMENT

If the Model 2234 has been damaged in shipment, first file a claim with the carrier.
Next, complete a full report of the damage (its nature and extent) and forward
immediately to the factory for further instructions. Include complete model number
information. Refer to the Customer Problem Report in the back of this manual.
SECTION 2
17