Table of Contents
Advertisement
MODEL 2234 DIGITAL FLOW COMPUTER ___________________________
3.7
COMPUTER ACTION REQUESTS
As stated in the Operational Overview portion of Section 3 of this manual, the
operator may cause the computer to perform one of four types of action:
A.
Controlling the display (ON all the time/ON for one minute);
B.
Calling for the computer to display any out-of-tolerance (error) conditions;
and
C.
Resetting flow totals.
For user convenience, the computer actions are described by groups as they apply
to different operational functions. A numerical listing of the Command Codes
appear in Table 3-2. Set the "enable/disable" switch to the "enable" position to
perform all actions, except as noted for each specific Command Code.
The group descriptions appear in the following order, starting in
paragraph 3.7.1:
A.
Operational Actions
B.
Diagnostic Aid Actions
C.
Parameter Display Actions
D.
Clearing Actions
Other operational functions are described elsewhere in this manual. Refer
to the Table of Contents to determine their location.
SECTION 3
95
Advertisement
Table of Contents
