Over-Rides - DANIEL 2234 Manual

__________________________ MODEL 2234 DIGITAL FLOW COMPUTER
C. Line Totalizing Factor (LKn) - Read Code 22n
A power of ten multiplier (the totalizing factor) that is being applied to the
total of the selected line (n), is displayed with the use of Read Code 22n.
The operator may enter exponent values between -9 and +9 (refer to
paragraph 2.6.3.1 for details pertaining to totalizer scaling). Key in the
values and press ENTR.
If no exponent is entered to factor the totals, the computer uses a totalizing
factor of 10

3.6.6 OVER-RIDES

Calculation required for product other than mass flow will need to be entered into
the computer as FXD values by the operator. (Refer to paragraph 3.10).
94
o
.
SECTION 3