DANIEL 2234 Manual page 57

MODEL 2234 DIGITAL FLOW COMPUTER ___________________________
Note that the Line and Station Volume Totalizing Factors are the same (10
examples above). This does not have to be the case. Different applications may
require a Station Totalizing Factor different from the Line Totalizing Factor in
order to obtain the best resolution.
2.6.3.2 SETTING UP OPTIONAL FUNCTIONS
A.
Read Codes 45 through 82 provide access to all print functions. These
Read Codes are inoperable if the print option was not selected with
the purchase of the computer. Refer to paragraph 3.8 of the manual
for setup and printing instructions.
B.
The frequency densitometer input option provides for the computer to
determine line density from the output of a frequency-type
densitometer. Read Codes 30 through 37 allow the operator to enter
and read the control parameters. Refer to paragraph 3.9 for set up
instructions if this option is being used. Note that the instructions in
paragraph 3.9 must be followed to extinguish the red error lamp if the
response to DENTYP in the Startup prompting Sequence was 1, 2, 3,
4, or 5.
SECTION 2
Serial (Printer) Option:
Frequency-type Densitometer Input Option:
-1
in the
45