DANIEL 2234 Manual page 25

MODEL 2234 DIGITAL FLOW COMPUTER ___________________________
4.
5.
6.
7.
8.
SECTION 1
Read (READ) - Entering a one- two- or three-digit function
numerical code and pressing READ displays the data being used
or calculated by the computer (see Table 3-1).
Fixed (FXD) - Pressing FXD displays data stored in the
computer by the operator (e.g., pressure, temperature, gravity,
etc.). An asterisk displayed with the data identifier indicates
that the computer is not currently using the data value for its
computations.
Variable (VAR) - Pressing VAR displays data from a transducer
or a computer calculation. An asterisk displayed with the data
identifier indicates that the computer is not currently using the
data for its computations.
Clear (CLR) - Pressing CLR removes entered data values from
the data code displayed and displays "0.0".
Command (CMD) - Entering a one- two- or three-digit
numerical code and pressing CMD causes the computer to
execute the specified command (see Table 3-2).
commands include the display of errors and the resetting of
totals. (Totals can be reset only when the green LED is
lighted.)
These
13