System Settings
Heat Schedule
E 2020 Nordson Corporation
Setting Up Heat Schedule
Use the Heat Schedule to set up a daily or weekly schedule to automatically
switch the heaters On or Off and to automatically enter and exit Setback.
ü
1. Press the
on the Navigation pad to Enable Heat Schedule.
2. Select Add a Heat Event, press > then do the following:
S
ü
Press
to select which day or days of the week you want to set up a
heat schedule. When done, press the Down key to the bottom of the
list and select Done.
S
Select Heaters On Time, then press >, and enter the time you want
the Master Heater control to switch On. For 12-hour clock, use the
Up/Down key to toggle between AM and PM. Press
S
Select Heaters Off Time, then press >, and enter the time you want
the Master Heater control to switch Off. For 12-hour clock, use the
Up/Down key to toggle between AM and PM. Press
Done. Press < two times to return to the Heat Schedule menu.
3. Select Add a Setback Event, press > then do the following:
S
ü
Press
to select which day or days of the week you want to set up a
heat schedule. When done, press the Down key to the bottom of the
list and select Done.
S
Select Enter Setback Time, then press >, and enter the time you
want the Master Heater control to switch On. For 12-hour clock, use
the Up/Down key to toggle between AM and PM. Press
continue.
S
Select Exit Setback Time, then press >, and enter the time you want
the Master Heater control to switch Off. For 12-hour clock, use the
Up/Down key to toggle between AM and PM. Press
Done. Press < two times to return to the Heat Schedule menu.
4. Press
to return to the Home screen.
NOTES:
S
Maximum number of event pairs is 6. You must enter an on/off times for
each Heat or Setback Event.
S
Heat and Setback Events cannot overlap each other.
S
A Setback Event must be contained within a Heat On/Off Event.
S
You can have multiple Setback Events within a single Heat Event.
S
If you remove a Heat Event, then all Setback Events contained within that
Heat Event are automatically deleted as well.
S
Heat or Setback Events cannot cross into the next day.
83
OLED User Interface
ü
to continue.
ü
and select
ü
to
ü
and select
Part 1128351_02