Enabling/Disabling Lid Open Alerts And Settings - Nordson ProBlue Flex Manual

System Settings
Level Sensing Settings
Lid Open Alert
Lid Open Alert Time
E 2020 Nordson Corporation

Enabling/Disabling Lid Open Alerts and Settings

An optional lid switch (part number 1128173) is required for the Lid Alert.
NOTE: A lid switch is standard for Melt-on-Demand systems.
Use the Lid Alert option to receive system alert pop-up message when the lid
is left open for too long.
ü
1. Press the on the Navigation pad to toggle Lid Open Alert to Enabled
or Disabled. The default is Enabled.
2. Select Lid Open Alert Time, press >, and enter the number of minutes
you want the lid to be opened before the melter enters into an Alert
condition. The default is 2 minutes, the minimum is 1 minute, and the
maximum is 10 minutes. When done press the
to accept changes.
3. Press to return to the Home screen, or press < to return to the
System Settings menu.
NOTE:
S
Press on the OLED panel to clear and reset any Alert, Fault, or
Stop condition.
47
OLED User Interface
ü
on the Navigation pad
Part 1128351_02