Monitoring And Viewing Adhesive Flow Output - Nordson ProBlue Flex Manual

64
OLED User Interface
Setting
Low Stop Threshold
High Stop Threshold
Stop Delay Count

Monitoring and Viewing Adhesive Flow Output

Flow
Total Products
Total Alarms
Defective Products
Adhesive Usage
Adhesive / Hour
Adhesive Usage
Part 1128351_02
Description
How much lower the add-on weight
(mg) can be from the Target Add-On
value before a Stop alarm is
generated.
How much higher the add-on weight
(mg) can be from the Target Add-On
value before a Stop alarm is
generated.
The number of consecutive
out-of-tolerance products allowed
before the system considers them
defective and generates a Stop alarm
Go to Home | Flow to view the following flow data:
Total products created since last reset.
Combination of Alert and Stop alarms, as well as Over Flow and
Phase Errors generated since last reset
Total number of products, after meeting the Stop/Alert count
thresholds since last reset.
Total amount of adhesive measured through the flow meter
Total amount of adhesive measured through the flow meter within the
hour.
Total amount of adhesive measured through the flow meter
Default Min
.3 * Target .05 *
Add on Target
Add on
.4 * Target .05 *
Add on Target
Add on
4 1
Description
Max
.5 * Target
Add on
.5 * Target
Add on
15
E 2020 Nordson Corporation