Monitoring The Tank Adhesive Level - Nordson ProBlue Flex Manual

Monitoring the Tank Adhesive Level

E 2020 Nordson Corporation
The melter has a built-in sensor to display the amount of adhesive, displayed
as a percent that is available for viewing from the Home screen.
S
If you have a Melt-on-Demand system, or a tank with an optional Fill
system, then from the Home screen, then Fill Level is displayed.
S
If you do not have a Fill system, then Tank Level is displayed
NOTE: These are read-only values.
25
OLED User Interface
Part 1128351_02