Defining Plc Communications - Nordson ProBlue Flex Manual

System Settings
Networking
PLC
E 2020 Nordson Corporation

Defining PLC Communications

Profinet, Ethernet/IP and Modbus TCP are natively supported and do not
require you to install a communication card.
S
Refer to Connecting Profinet, Ethernet IP and Mod BUS/TCP for
more information.
S
For all other communication cards, refer to documentation that came with
the communication kit for installation and setup instructions. You can also
get the appropriate instruction sheet for your communication card from
the BBconn Cloud Media Center.
Communication Kit Name
KIT,ACCESS,PB
FLEX,COMM,PROFIBUS
KIT,ACCESS,PB
FLEX,COMM,ETHERCAT
KIT,ACCESS,PB
FLEX,COMM,CCLINK
KIT,ACCESS,PB
FLEX,COMM,SERCOS III
KIT,ACCESS,PB
FLEX,COMM,DEVICENET
KIT,ACCESS,PB
FLEX,COMM,POWERLINK
KIT,ACCESS,PB
FLEX,COMM,CCLINK IE
1. Select Specific Network and do the following to continue:
S
For Profinet, enter the Profinet Station Name - the Profinet device name.
The default name is pbflex-pnio.
S
The Profinet station name must follow these guidelines:
‐
Can contain letters and numbers
‐
Letters must be lower case
‐
Can contain a hyphen (-) or a period (.)
‐
Cannot begin or end with a hyphen (-)
‐
Cannot begin with the character string "port-xyz" (x, y, z = 0 to 9)
‐
Cannot have the form of an IP address n.n.n.n (n = 0 - 255)
2. When done, press < to return to the Network Settings menu or
return to the Home screen.
OLED User Interface
Kit Part Instruction Kit
Number Part Number
1129161 1129124
1129162 1129293
1129163 1129294
1129164 1129295
1129165 1129296
1129166 1129297
1129167 1129298
Part 1128351_02
91
to