Defining Setback Settings; Manually Entering/Exiting Setback - Nordson ProBlue Flex Manual

50
OLED User Interface
System
Status
Part 1128351_02

Defining Setback Settings

Setback, also known as Standby, reduces the temperature by a user-defined
temperature offset from all enabled external zones.
There are three types of Setback options, including:
S
Manual Enter/Exit Setback
S
Automatic System Setback
S
Manual Setback - Auto Exit Time
When the melter is in Setback, the System Status is Blue and the Master
Setback control LED is illuminated.

Manually Entering/Exiting Setback

S
Press the master control button to toggle On (enter) or Off (exit)
Setback.
NOTES:
S
You can use the Setback master control to exit out of any Setback mode.
S
Upon exiting Setback mode, the melter status returns to Run (or Ready)
when all enabled zones are within 5 degrees of set point and the Master
Pump Control is switched On.
S
Press on the OLED panel to clear and reset any Alert, Fault, or
Stop condition.
Master Setback
E 2020 Nordson Corporation