Troubleshooting Heated Zone Alerts And Faults - Nordson ProBlue Flex Manual

118
OLED User Interface
Item Component
1 System Status LED
2
Heated Zone
3
Part 1128351_02

Troubleshooting Heated Zone Alerts and Faults

When an alert or fault condition occurs on a heated zone, the following
happens:
1
Tank
Manifold
Hose 1
Applicator 1
LED/ Icon Description
The System status indicator will change to Red for a
Fault, and Yellow for an Alert condition.
Indicates an Alert condition.
!
Indicates a Fault condition
!
NOTES:
S
In most cases, you have approximately 2 minutes to resolve an Alert
condition before the heated zone changes to a Fault condition. When a
Fault condition occurs, both the Master Heater and Pump controls
automatically switch OFF.
S
Press on the OLED panel to clear and reset any zone Alert or Fault
conditions.
2
177 C
177 C
!
440 C
490 C
!
3
E 2020 Nordson Corporation