Nordson ProBlue Flex Manual page 36

30
OLED User Interface
1
Fault
No RTD/heater current is detected for zone 2.
Part 1128351_02
4 3
Item
Type of alarm generated. This can be an Alert, Fault, or
1
Stop.
2 Date and time stamp when the event occurred. Some
events occur quickly. Look at the seconds in the time stamp
for additional troubleshooting.
3 Opens the Event Log, with the newest event displayed first.
NOTE: Go to Tools | Reports/Logs to export the Event Log
to a USB
4 Acknowledges the message and removes the alert pop up
message from view. Although the condition still exists,
attention is needed. You can view the message again from
the Event Log.
2
Description
E 2020 Nordson Corporation